Thermometers D380 Non Contact Infrared Thermometer User Manual

June 6, 2024
Thermometers

Thermometers D380 Non Contact Infrared Thermometer

General Description

  • Non-contact Body Infrared Thermometer is Specially designed for take the body temperature of a person regardess of room temperature.
  • Depending on various skin types and thickness, there may be temperature difference.
  • when the indoor temperature is singniticant difterence ,the body intrared thermometer should be placedt in that room for 15to 20 minutes before using

Safety Information

  • This device must ony be used tor the puposes described in this instruction manua.

  • This device must only be used in an ambient temperature range between 10’cand 40C

  • Do not expose this thermometer to extreme temperature conditions of >40 Cor <O C

  • Do not expose this thermometer electric shocks.

  • Do not use the devIce in relative humidity higher than 85% RH

  • Do not use the devIce near large electromagnetic fieds such as found with cordless or cellphones.

  • Keep the device away trom water and heat,including direct sunlinght

  • Do not drop or knock the device,and dot not use if damaged, It may affect the accuracy of measurements when the forehead is covered by hair perspiration,cap or scrat,
    Keep the measuring distance as <bcm

  • When the body infrared thermomenter should be left in that room during 15 to 20 minutes before using

  • .It may atect the acCuracy of measurements when the forehead is covered by perspiration or other factors,

  • please take the temperature behind the earobe.

  • Cean the gass with cotton bud lighly moistened with 70% alcohol

Feature

  • Precise non-contact measurements , Built-in aser pointer
  • User seectabe ‘c or (Through the MODE Key long press more than 5 seconds
  • Automatic selection range and Dispaly Resolution 0.1C
  • Automatic Date Hold& Auto Power off
  • Set Aarm value(the alarm threshould default value is 38 C
  • Instruction: turnon unit and press “MODE” button 3 seconds, LCD display “F1” Re-press “MODE” to enter 38(dutat alarm setting), increase or decrease value by press up or down arrow,press measurement rigger to finish setting9.

Seection for buzze
Instruction: turn on the unit and press “MODE” button3 ceconds, LCD display”F3″ Re-press “MODE” for setting. press up or down arrow for selection “ON” or “OFF”mode. press measurement rigger to finish setting.
Selection for body or ambient temperature

Operation way: In standby,Press the “Mode” button,then the LCD screen showing “F138.0C”,by pressing the-“to”-“to change the Date, Enter into “F2” setting by press “MODE one more time, then the LCD screen showing “F2 0,0 C.you can press “-“to “-” to change the Date,it is the same operation way for f3 and f4
Note:” 5UrF” For showing the object, “Body” for the human being is brow mode under the F4 setting

Intended Use

  • The Non-contact Body Infrared Thermometer is designed for body surface and forehead temperature measurement for infants and adults without contacting to human body. It can be used by consumers in household environments in accordance with the ASTM 1965-1988
  • Standard specification for infrared thermometers for intermittent Determination of Patient temperature.

Percaution Before Use

In order to obtain reliable and stable results. when changing the environment to a room with a significant temperature difference, it is recommended to leave the Non-contact Body infrared thermometer to this ambient temperature for 15 to 20 minutes before using it.

  • Depending on various skin types and thicknesses, there may be temperature differences.
  • Do not expose the thermometer to sunlight or to water.
  • Allow one-minute interval between two measurements.

Normmal lemperatures According lo Measurement Method MessurementThermometers-D380-Non-Contact-Infrared-Thermometer-fig
7

The temperature of the human body varies throughout the day. it can also be infuenced by numerous external factors: age sex type and thickness of skin…
Normal Temperature According To AgeThermometers-D380-Non-Contact-Infrared-
Thermometer-fig 8

Configuration

  1. LR Sensor
  2. LCD Dispay
  3. UP Button
  4. Down Button
  5. Mode (F/’C) Button
  6. Measurement Switch
  7. Battery Cover
  8. Handle

Technical Specification

Normal Conditions of UseThermometers-D380-Non-Contact-Infrared-
Thermometer-fig 9

Thermometers-D380-Non-Contact-Infrared-Thermometer-fig
10

Thermometers-D380-Non-Contact-Infrared-Thermometer-fig
11

Use

  • 8-1. Install battery
  • 8-2. For the first use to when inserting new batteries,wait 10 minutes for the warm-up of the apparatus
  • 8-3. If the device is not used for along time once you turn it on again,the device will test the room temperature first and will delay turning on for one two seconds.
  • 8-4. Aim towards the forehead (see the diagram below for the positioning), form a distance of 5cm. press the measuring key, the temperature is dispayed immediately,Making sure there is no hair,perspiration,cosmetic or cap covered on the forehead.
  • 8-5.When the room temperature is singnificant difference, or there is perspiration on the forehead, You can take the temperature behind the ear lobe, Making sure there on hair perspiration, cosmetic or cap covered.

Measuring Operation
9-1. Data Memory
Data Memory automatically after temperature measurements, which will display at the right corner of LCD,Press “UP” or “DOWN” button to display the last temperature measurement.

9-2. Battery Replacement
When battery power is not sufficient, LCD wiLL dispLay “- +” repLacement of one new battery
Open battery cover, then take out the battery and p”ace a new battery in ,Cover the instrument.Thermometers-D380-Non-Contact-Infrared-Thermometer-fig
4

9-3. Longevity Use
The Non-contact Body infrared Thermometer was conceived for an intense and professional use, its longevity is guaranteed for 40,000 takings.

Advice

The protective glass over the lens is the most important and fragile part of the thermometer,please take great care of it.
Clean the glass with cotton fabric,wet with water or 70°C alcohol.

  • Do not use other batteries thanmentioned batteries,
  • do not recharge non rechargeable batteries.
  • Do not expose the thermometer to sunlight or water.

11. Troubleshooting
If you happen to have one of the fo*”owing prob”ems while using the non- contact body infrared Thermometer please refer to this breakdown service guide to help resolve the problem.if the problem persists please contact our customer service.

The screen dispays the message “Hi” When using the non-contact Body infrared Thermometer The message HI can show on the screen. The analysis of “HI” is that the temperature you are testing is above the measurement range selected. Superior to 43°C (109.4 F) in Body mode.

The screen dispaly the message “L 0” When using the non-contact body infrared thermometer The message IO can show on the screen The temperature is analyzed under the measuring range selected. Less than 32C (89Fin Body mode,

This message dispalys in various cases-please find below a list of the main cases: 2F in Surface mode.Thermometers-D380-Non-Contact-Infrared-
Thermometer-fig 12

Advice For the 1st Use
For stable and reiabe results. It is essential to check the non-contact body IR thermometer and change as needed, as follows:

  1. Step: take the temperature of a person using a conventional thermometer, you will get st 37.5 °C for instance.

  2. step: take the temperature of the same person using the non-contact Body IR thermometer keeping the 5cm distance between the thermometer and the forehead (take care to remove any obstacle which could alter the measurement (hair, perspiration..)if you get 37.5°C the Non-contact Body IR thermometer is properly set and ready for use.
    If you get a lower temperature, 36.4°C (97.4′ F)for example, your difference is 1.1 °c (33.98 F) You should adjust the temperature on the Non-contact Body LR thermometer and add the difference I.e 1.1°C (33.98 F)
    Instruction: turn on unit and press”MODE” button for 3 seconds to enter “F1” ,access “F2″by choosing up or down arrow, Re-press”MODE” to acess 0.0. increase or decrease value by press up or down arrow.press measurement rigger to finish setting.

  3. 3th step: To check, take the temperature again using the Non-contact Body LR thermometer.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals