NOYAFA NF-525 Thermal Imager User Manual

NOYAFA NF-525 Thermal Imager

Overview

The N F-525 infrared thermal imager can measure the pixel temperature of the target object and capture its state by means of the infrared thermal imaging and visible light.

Keys and Functional Description

1. Charging indication: USB Type-C interface is used for charging. During charging , the display screen is normally on and display the current power volume.
2. On/Off: Short press” “to power on or long press” “to power off.
3. Photographing and video recording: Short press “Trigger” in power-on state to photograph, or long press “Trigger” to record videos.
4. Data transmission: When connecting with a computer through the USB Type-C wire , the thermal imager can generate the USB drive and copy photos/videos through the Windows system.

Functional Description

On/Off

• Short press” “in power-off state to power on or long press” “in power-on state to power off.

Main interface

• Press” “on this interface to switch the palette, or press to switch the function of visible light imaging or infrared imaging.
• Short press “Trigger” to photograph or long press “Trigger” to record videos.
• Press” ” on this interface to light off the screen and save power or press any keys to light on the screen again and enter the interface.
• Press” “to display the following menu interface:

• After the primary menu pops up, select a function with , press” ” to pop up the secondary menu. Press” ” to return to the main interface.
• After entering the secondary menu, select a function with , press” ” to confirm the selected function, and press” “to return to the primary menu. Both photographing and video recording are valid on this interface.

Photographing and video recording

• Short press “Trigger” to photograph (image format: jpg).
• Long press “Trigger” to record videos (video format: mp4 ).

Album

• Press” “on the main interface to pop up the primary menu, select the album and” “,press” ” to enter the album.
• All the pictures and videos in the album are arranged in the shooting time.
• Select the pictures or videos with, press” ” for fullscreen display or play.
• Press in the display or play state to switch the previous or next file. After play or pressing” “, return to the album list interface.

System Settings

Language switch

| Chinese (Simplified), Chinese (Traditional), English, French, German, Spanish, Russian, Dutch, Japanese, Korean and Arabian
Emissivity| 0.01-0.99
Unit switch| Degree centigrade, Fahrenheit and Kelvin
Temperature alarm (On/Off) setting| Select the upper/lower limit alarm or set the alarm value
Storage settings| View the internal storage situation and formatting
Date and time| Time setting: Year/month/day/hour
Auto OFF| Set the auto OFF time if there is no operation for a long time
The palette bar display switch| Whether the screen palette bar is displayed
Screen brightness| Screen brightness (adjustable)
Factory reset| Whether to reset the factory data (optional)

Palette

To optimize different scenarios and facilitate observing different target objects, the thermal imager comprises 8 common palettes.

The setting of image display modes

Image display mode

Single infrared imaging| Only observing the infrared thermal imaging
Visible light imaging| Measure the temperature with an ordinary visible light camera
Picture in picture| Especially measuring the temperature in the center part
Edge blending| Observe the infrared image distribution, measure the temperature or display the detailed visible light
Overlay blending| Overlay some colors of the visible light on the infrared thermal imaging and make the background clearer
Blending adjustment| Adjust the blending proportion when the visible light and infrared imaging are blended into a picture
Blending deviation adjustment| Adjust the relative position when the visible light and infrared imaging are blended into a picture

Icon Description of image display mode

Choose the image mode according to the needs

1. Open the image mode icon
2. Choose the image mode according to the needs

The display effect of image mode is shown as below

Temperature measurement mode

1. Conventional temperature measurement
   • Support temperature measurement at the center point as well as continuous high/low-temperature tracking
2. Regional temperature measurement
   • Choose some regions for center point and high/low-temperature tracking and test, or zoom in/out the temperature measurement region for different scenarios.

Packing List

Remarks: The package accessories shall be subject to the received material object.

Technical Parameters

Technical parameters of the product

Technical parameter description of NF-525

Handheld thermal imaging

| Resolution| 120•90
Working band| 8~14um
Frame rate| 25Hz
NETD| <60mK@25°C
Field angle| H=38°V=50°
Emissivity| 0.01~0.99
Temperature measurement range| Low temperature: -10 to 160°C High temperature: 160-400°(
Temperature measurement accuracy| ±2°( or ±2% of the reading
Screen size| 2.8 inches
Image mode| Edge blending, overlay blending, picture-in-picture, single infrared and single visible light
Palette| Iron red, white heat, black heat, rainbow, red heat, high contrast, green heat and lava
Temperature measurement| Support full-screen temperature measurement of highest/lowest/center point and mild region

Visible light

| Visible light camera| 100 million pixels
Field angle of visible light| H=55°V=83°
Resolution| 720 P
General|

Language

| Chinese (Simplified), Chinese (Traditional), English, French, German, Spanish, Russian, Dutch, Japanese, Korean and Arabian
Interface| USB Type-C (support charging and data transmission)
Battery| 2600mAh lithium battery
Capacity| 8G internal memory
Picture storage format| JPG
Video format| MP4
Working time| 4 hours if the battery is fully charged
Working temperature| -10~50°C
Storageuretemperat| -40~85°C
Net weight| 300g
Product dimension| 219 x 72 x 66mm

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>