Polhus 5758 Solar Powered Mini Vent Instruction Manual
- July 20, 2024
- Polhus
Table of Contents
Polhus 5758 Solar Powered Mini Vent
Product Specifications
- Material: Polycrystalline with tempered glass & PP Plastic
- Motor: Brushless DC Motor
- Dimensions: 175x175x120mm
- Net Weight : 0.52 kg
- Input Watt: 2.5W
- Voltage: 12v
- Fan Max capacity : 68 cfm
- Airduct Diameter: 95 mm
- Included in the package: 1 x Solar-powered Mini Vent, 1 x Manual, 4 x Screws, 1 x EVA foam gasket
Product Installation
- Select an installation location that is as flat as possible.
- Mark the location of the hole using a compass.
- Cut a 100 mm hole.
- Remove the two screws from the inside. See Figure 1.
- Take the top and bottom case apart, and unplug the red wire. See Figure 2.
- Put the black gasket under the bottom part of the fan, then fix this part to the wall using 4 screws. Make sure the side with the F hole faces down. See Figure 3.
- Reconnect the red cable and reassemble the top and bottom part. See Figure 4.
FAQ
-
What are the main applications of the Solar-powered Mini Vent?
The main applications include RVs, camper vans, greenhouses, buses, caravans, trailers, lorry vans, offices, portable toilets, kitchens, bathrooms, and bedrooms. -
What is the power source for the Mini Vent?
The Mini Vent is solar-powered with a polycrystalline panel and operates on a 12v system. -
What is included in the package?
The package includes one Solar-powered Mini Vent, one manual, four screws, and one EVA foam gasket.
Note!
- It is recommended to periodically clean the solar panel to ensure the vent charges continuously and receives maximum sunlight.
- Choose a suitable position to make sure the solar panel catches the most sunlight possible.
- Cut the hole for your solar wall vent only after carefully considering the location and the correct sizing of the hole. We recommend that you MEASURE TWICE AND CUT ONCE!
Functions
- Avoid heat build-up and keep the area ventilated
- Remove excessive moisture and damp
- Replenish oxygen, eliminate unpleasant odors, mildew, smoke, dust, airborne bacteria, and carbon dioxide
Applications
This item is mainly used for RVs, camper vans, green houses, buses, caravans,
trailers, lorry vans, offices, portable toilets, kitchens, bathrooms and
bedrooms.
Specifications
- Material: Polycrystalline with tempered glass & PP
- Plastic Motor : Brushless DC Motor
- Dimensions: 175x175x120mm
- Net Weight : 0.52 kg
- Input Watt : 2.5W
- Voltage : 12v
- Fan Max capacity : 68 cfm
- Airduct Diameter : 95 mm
Included in the package:
- 1 x Solar-powered Mini Vent
- 1 x Manual
- 4 x Screws
- 1 x EVA foam gasket
Installation
The solar wall fan can be installed onto walls or other materials with a thickness greater than 20 mm.
- Select an installation location that is as flat as possible
- Mark the location of the hole using a compass.
- Cut a 100 mm hole.
- Remove the two screws from the inside. See Figure 1.
- Take the top and bottom case apart, and unplug the red wire. See Figure 2.
- Put the black gasket under the bottom part of the fan, then fix this part to the wall using 4 screws. Make sure the side with the “F“ hole faces down. See Figure 3.
- Reconnect the red cable and reassemble the top and bottom part. See Figure 4.
