HUMMSE E3 True Wireless Earbuds User Manual
- June 12, 2024
- HUMMSE
Table of Contents
HUMMSE E3 True Wireless Earbuds
Packing List
Note: The medium-sized eartips are pre-mounted on the earbuds.
Product Overview
Safety Instruction
-
Using earphone at high to moderate volumes for extended periods of time will result in permanent hearing damage. It is advised you keep volume levels moderate to low at times for your safety.
-
Do not use while driving a car, cycling, operating machinery, or performing other activities that require hearing surrounding sounds.
-
Do not use earphone in thunderstorm weather, the earphone may not work properly in the condition, and increase the risk of bring hit by lightning.
-
Earphone may not work properly under high temperature or high humidity conditions. Do not use any corrosive cleaner/oil to clean the earphone.
-
If the earphone comes in contact with liquids, quickly wipe away.
-
If submersed in water, do not turn the earphone on until completely dried.
( Tips: liquid submersion voids the warranty.) -
Keep the earphone and packaging out of reach of children.
-
Please use the original charging cable provided by the earphone manufacturer for charging and choose the.
Wear
- Step1: Choose the comfortable eartips
- Step2: Wear it in ear and adjust to a comfortable position (Please put the right and left headphones on the correct ear).
Power
Power On
-
Auto Power On:
When opening the charging case and taking out the earphones. The earphones will automatically turn on and start pairina. -
Manual Power On:
In the shutdown status and when the earphones are not in the charging case, press and hold the MB of earbuds for 1.5 seconds to power on.
Note: When the pairing is successful, the red and white lights will be on for 2 second at the same time.
Power Off
-
Method 1
Put the earphones back in the charging case and close the case to turn them off. -
Method 2
If the earphones are not in the charging case, just press and hold the MFB of the earbuds for 3 seconds to power them off.
Pairing
-
Stereo Mode
Open the charging case and take out the earphones. They will automatically enter the pairing mode. In this mode, turn on the Bluetooth of the phone and select “JK-E3”. -
Single Earbud Mode
1. Take one earbud(L/R) out from the charging case and close the case.
2. Trun on bluetooth of your phone and choose” JK-E3 ” Earbud can pair with your phone.Function
Phone Calls Control
Music
Charging
-
Earbuds Charging
Put both earbuds into charging case and close case, earbuds are being charged and led power display on case will move. -
Charging for the case.
1. **Method 1** : Use USB C charging cable(Provided) to conncet an adapter (not provided) your charging case.
2. **Method 2:** Put the charging case on wireless charger(not provided). Please keep Led power display facing up, case can be charged automatically.FAQs
-
Q: Why these earbuds can not pair with my mobile phones?
A: Please make sure the earbuds are full charged and power on.- Please make sure the bluetooth of your phone is trun on.
- If above 2 points have no problem, please put earbuds into the case again and close the case, hold on for 1 min, then open the charging case and reconnect earbuds with your phone.
-
Q: Why does the music cut in or cut out?
A: First, please do not let the distance between these earbuds and your phone more than 33 feet(without obstacle.If the distance less than 33 feet, Please note 2 tips as below:
1. Please make sure there is no obstacle between the earbuds and your device.
2. Please make sure there is no Microwave oven/Wif transmitter around you, which are more likely to produce electromagnetic interference and result in signal interruption.- Q: Why does the earbuds can not be charged and not disconnected with my phone even earbuds are put into case and I have closed the case?
A: Please make sure the charging case are not in low battery, if the charging case are in low battery, earbuds can not be charged and not disconnected even though they are in case. So, please use the type-c cable to charge the case fullly.