acerpure WP743 60W Hot and Cold Water Purifier User Manual

July 20, 2024
acerpure

WP743 60W Hot and Cold Water Purifier

“`html

Product Information

Specifications:

  • Model: WP743-60W
  • Usage: Family and office use
  • Water Source: Desktop or under counter
  • Main Components: Main Unit, Filters, User Manual, Warranty
    Card, Diverter, Gaskets, Adapters, Anti-drop clips, Water outlet
    pipe sucker, DN8 PE water pipe

Product Usage Instructions

Installation Instructions (Water Source Desktop Type):

  1. Place the product on a flat surface.

  2. Connect the water inlet pipe to the diverter ensuring the
    waterproof nut is in place.

  3. Remove the aerator from the faucet and install the diverter
    with gasket.

  4. Connect the other end of the PE water pipe to the water inlet
    behind the Main Unit.

  5. Connect the water outlet pipe to the concentrated water outlet
    and attach the sucker to the sink’s side wall.

Installation Instructions (Water Source Under Counter

Type):

  1. Place the product on a flat surface with installation tools
    ready.

  2. Connect the raw water connector and concentrated water outlet
    following the provided instructions.

  3. Use three-way ball valve connection for water dispenser and tap
    water connectors.

  4. Ensure proper connection and sealing using the gray leak-proof
    ring and removing dust plugs.

FAQ (Frequently Asked Questions)

Q: Can I use ice cubes or other liquids in the water tank?

A: No, do not add turbid tap water, ice cubes, milk, juice,
etc., to the water tank.

Q: Can I move the product easily?

A: Do not move the product at will. If needed, ensure to empty
the water tank before moving.

Q: What tools are recommended for installation?

A: Recommended tools include an adjustable wrench, pliers,
diagonal pliers, Phillips and flat-head screwdrivers.

“`

WP743-60W

Table of Contents
Safety Instructions……………………………………………………………………………………………………………………………………… 02 Product Configuration and Structure ………………………………………………………………………………………………………… 03 Installation instructions …………………………………………………………………………………………………………………………….. 04 Display Panel and Function Buttons Introduction……………………………………………………………………………………… 06 Operating Instructions ………………………………………………………………………………………………………………………………. 08 Filter Replacement ……………………………………………………………………………………………………………………………………… 10 Restricted Substance Content Labeling…………………………………………………………………………………………………….. 11 Before Seeking After-sales Service……………………………………………………………………………………………………………. 12 Product Specifications and Company Information……………………………………………………………………………………. 13

Safety Instructions
Prohibition
1. Do not move the product at will. If you need to move it for any reason, please empty the water in the tank before moving.
2. Do not add turbid tap water, ice cubes or other liquids such as milk, juice, etc., to the water tank. 3. Do not put the water outlet deep inside the cup when receiving water to avoid the danger of the
water outlet being blocked by boiling water. 4. Do not suspend the water container. Place it on a flat surface.
Note
1. This product is for family and office use. Do not use it for other purposes. 2. Check whether the power cable and plug are damaged before use. Please do not bend or pull the
power cord to avoid poor contact. If the power cable is damaged, it must also be replaced by authorized repair personnel in order to avoid danger. 3. Before use, please check if the voltage matches the label on the product and do not use the universal socket with other electrical appliances at the same time. 4. Switch off the power before unplugging the plug. Do not touch the power plug with wet hands in order to prevent the danger of electric shock. 5. To avoid danger, please place the product on a flat surface (the tilt angle of the surface should not be more than 10°). 6. Stop using the product when the inlet water temperature or ambient temperature is below 5°C or above 38°C. 7. After taking higher temperature water or taking lower temperature water immediately, the water temperature may be higher when it just comes out. Please use it carefully to avoid burns. 8. When the tap water used does not meet the government’s tap water standards (e.g., large sediment content, TDS exceeds the standard), the filter life of this product may be shortened as a result. 9. This product is not intended for use by users (including children) with physiological, perceptual, mental ability, experience or knowledge deficiencies unless used safely under the supervision or guidance of the person responsible for their safety. 10.Unplug the power plug if this product is not used for an extended period of time. Especially when there are emergencies such as thunder and lightning, earthquakes or fires, please switch off the power and unplug the power plug immediately. 11.This product only requires external cleaning and maintenance; do not clean the surface with rough cleaning tools, and do not rinse it with water directly. 12.This product may not be repaired or modified by repairers who are not authorized by our company. If you discovered any abnormalities such as noises, smoke or strange odors, please switch off the power immediately, unplug the power plug and contact customer service personnel. 13.Please refer to the company information at the end of this manual on how to contact customer service. 14.This product has been tested before leaving the factory. If there is some vapor inside the product, it is a normal phenomenon. 15.Please be sure to use the original filter to ensure stable quality and product warranty.
02

Product Configuration and Structure

Main Unit

Filters

User Manual + Warranty Card + Bottom leak-proof spare parts

Diverter + gasket

Inner thread M22/outer thread M24 adapter + gasket

Anti-drop clip *4

WP743-60W

  • The parts have been already installed
    in machine and spare ones are provided for potential loss or wear.

Water outlet pipe sucker

DN8 PE water pipe *2

Product Structure

Display Panel Water Case

Water Outlet
Raw water connector

Transparent Hydrogen Water Window
Concentrated water connector

Main Unit

Power cord

Thank you very much for purchasing this product. Please make sure to read this manual carefully, use this product correctly, and store it properly

03

Installation instructions (Water source desktop type)

Diverter
Raw water connector

Concentrated water outlet

Hold down the gray leak-proof ring first

Remove the dust plug

1. After removing the product from the package, place it on a flat location such as the table top or
cabinet countertop.
2. When connecting the water inlet pipe to the diverter, the waterproof nut must be placed on the DN8 PE water pipe first, and push the water pipe to the bottom; when the DN8 PE water pipe head slightly deforms, it means that it has reached the bottom, then lock the waterproof nut.
3. Remove the aerator from the faucet and install the diverter (including gasket) instead, then connect the other end of the PE water pipe to the water inlet behind the Main Unit.
4. Hold down the gray leak-proof ring first when connecting the water inlet pipe to the water inlet, and remove the dust plug. Then connect the DN8 PE water pipe, and insert the anti-drop clip.
5. Connect the water outlet pipe to the concentrated water outlet and install the anti-drop clip, and attach the sucker to the side wall of the sink.

Diverter
Raw water connector

Concentrated water outlet

04

Installation instructions (Water source under counter type)

Raw water connector

Concentrated water outlet

Hold down the gray leak-proof ring first

Remove the dust plug

Three-way ball valve connection

Water dispenser connector
Water dispenser connector

Tap water connector

Tap water connector
Tap water connector

Sewer

1. After removing the product from the package, place it on a flat location such as the table top or cabinet countertop with the installation tools. (You must prepare your own installation tools; recommended tools include an adjustable wrench, pliers, diagonal pliers, Phillips and flat-head screwdrivers)
2. Take out the three-way water inlet ball valve Note 1 Install it on the corner valve, connect the PE water pipe, and install it at the water inlet behind the Main Unit. (Note: The PE water pipe must be inserted tightly)
3. Connect the water pipe by following the schematic diagram for tabletop installation. (As shown in the figure to the right and the installation instruction diagram)
4. The concentrated water can be discharged directly into the sewer or recycled.
Note 1 The three-way ball valve is an optional purchase component
05

Raw water connector

Concentrated water outlet

Water dispenser connector

Tap water connector Sewer

Concentrated water
Sewer

Display Panel and Function Buttons Introduction

Function buttons

-Filter reset buttonAfter replacing the filter, please press and in power on mode, hold this button for 3 seconds to enter the filter selection mode, then select the filter you want to replace, and finally press and hold it for 3 seconds to confirm the completion of the filter reset. -Smart wash buttonUse this button to wash and drain the internal water circuit and water tank. Quick press: The current TDS value is displayed at the middle of the panel Press and hold for three seconds: Smart wash starts, and the wastewater is discharged from the outlet after three minutes. Please make sure to prepare water containers in advance to receive water. -Normal temperature waterWater temperature can be adjusted to normal temperature by this button before water is dispensed. -Cold waterBefore dispensing, the water temperature can be adjusted to cold water by this button.
-Hot waterBefore dispensing, the water temperature can be adjusted to hot water by this button.
-Up and down adjustment buttonsTouch this button to select to display water temperature, water volume or TDS value and adjust water temperature and volume within a limited range
06

-Power buttonYou can start or stop using this product. *In standby mode, please press and hold for 2 seconds to turn on the product, and in power on mode, you can press and hold for 2 seconds to enter standby mode. -Direct water dispense buttonYou can use this button to preset the normal temperature water dispensing, and with the predetermined water volume mode, when the water dispensing exceeds 500ml, the water dispensing will be stopped automatically.
-Small cup volume water dispense buttonYou can use this button to dispense water in a small cup volume (150ml by default).
-Large cup volume water dispense buttonYou can use this button to dispense water in a large cup volume (300ml by default).
-Child lockIt is designed to prevent burns. When taking hot water, you need to press the child lock first and then press the corresponding water temperature.

Display Panel and Function Buttons Introduction

Operating Instructions
First time use Please place the product on a table or a flat area for smart wash and drainage and pay attention to the maximum water level of the product.

Indicators -Filter life indicator-
You can check the status of the filter life by this indicator. When the indicator light is orange, it means that only 20% of the filter life is left. When the indicator light is red, it means that the filter is exhausted and needs to be replaced immediately.
-Hydrogen production indicatorYou can check the working status of the hydrogen production system by using this light. When the light is on, it means the hydrogen production is in progress, and when it is off, it means the hydrogen production is finished.
-Out of water indicatorWhen this light is on, it means that the water tank is out of water, so you need to wait until the water production is finished before you can take water.

-Malfunction indicatorWhen the malfunction indicator is on, please see page 10 for troubleshooting or contact acerpure customer service.
-Water purification indicatorYou can use this indicator to check the status of the water dispenser’s water production. When the indicator is on, it means that water filtration is in progress.
-UV lightYou can check the working status of the water purification system by using this light. When the light blinks, it means the UV sterilization is in progress, and when it is off, it means the sterilization is finished. -Water change indicatorThis indicator only applies to the WP742-40W model.

07

Complete the installation of the Main Unit by following the installation instructions on Page 4 or 5.

After inserting the plug, please press and hold the power button for 2 seconds to turn on the product.

Press and hold the smart wash button for cleaning, place a water container (such as a bucket) at the water outlet and wait for about 6-10 minutes for the cleaning to complete, and then it will start producing water again automatically; it can be used normally after water production is complete (It is recommended to clean it 1-2 times when using for the first time, then clean it once every two weeks under regular use).
Regulate water temperature

Normal temperature water dispense

Please press Direct water dispense button on the panel for normal temperature water.

Cold water dispense

Please press Cold water on the panel, and then press Direct water dispense button directly for cold water dispensing. (Press and hold the cold water button for 5 seconds to turn off the cold water production, and press again for 5 seconds to turn on the cold water production)

08

Operating Instructions
Regulate water temperature

Hot water dispense

Please press the child lock to unlock and then press the hot water button. There are three hot water temperatures. (70°C, 85°C and 95°C by default)
Preset water temperature Adjustment
range

Please press the direct water dispense button for hot water that meets your temperature requirements.

To adjust the water temperature: select a water temperature range and adjust the value by the up and down buttons

Please note that there is a fixed range for hot water temperature adjustment. Please see this table for the range. Adjust the preset value of hot water temperature: Unlock first, touch the hot water button and select a hot water section. Press and hold the hot water button for three seconds to enter the setting mode. Use the up and down buttons to adjust the preset value. After selection, stop the action for three seconds. The machine is now set up and will stop flashing.
Regulate water dispensing volume

Small cup volume water
dispense

For the predetermined water volume of 150ml, select the small cup volume of water and then select the water
temperature.

Select the small cup volume of water and then press the up and down buttons to adjust the water volume in units of 50ml (volume range: 150~500ml); after the adjustment, press the direct water dispense button to dispense the water.

Large cup volume water
dispense

For the predetermined water volume of 300ml, select the large cup volume of water and then select the water temperature.

Select the large cup volume of water and then press the up and down buttons to adjust the water volume in units of 50ml (volume range: 150~500ml); after the adjustment, press the direct water dispense button, and you can dispense the water.

09

Operating Instructions
Filter Replacement Turn off the power and unplug the product before replacing the filter.

Press the button and the water tank cover of the dispenser will pop open automatically.

Turn the filter out counterclockwise and pull it upward.

Filter Installation

Install a new filter and fasten it clockwise to the end.
10

Press and hold the reset button for 3 seconds,
then touch the reset button to select the corresponding filter, and finally press and hold for 3 seconds to complete the reset.

Filter function and replacement cycle

Abbreviation of filter

Type of filter
PP activated carbon rod composite filter

Reverse osmosis filter

Recommended replacement cycle
6-12 months
12-24 months

Rear composite filter

6-12 months

Restricted Substance Content Labeling

Equipment name: Ice, warm, instant hot water purifying dispenser

Model number (form): WP743-60W

Unit: Power Cable Set

Lead (Pb)

Restricted substances and their

Chemical Symbols

Lead (Pb)

Cadmium (Cb)

Hexavalent chromium
(Cr+6)

Polybrominated Polybrominated biphenyls (PBB) diphenyl ethers
(PBDE)

Power Cable

Printed Circuit Board
Power Supply

Plastic Components

1. Exceeds “0.1 wt %” and “exceeds 0.01 wt %” means that the percentage of restricted substances exceeds the reference value. 2. “O” means that the percentage of the restricted substance does not exceed the reference value. 3. “_” means that the restricted substance is an excluded item.

11

Before Seeking After-sales Service

If you discovered that the product malfunctioned, please check the following items before contacting customer service.

Problem

Possible cause

Product does not turn on Is the power plug plugged in the socket properly?

Product cannot discharge water

Check the water pipe; is water supplied normally? Is the filter blocked because it is too dirty?

Product water discharge amount is too small
The taste is not satisfactory
Water seepage at the screw connection

Is the filter too dirty or exceeding the use time for a replacement?
Is the filter too dirty or exceeding the use time for a replacement?
Have the parts on the machine been disassembled by yourself? Are the silicone seals in the water seepage area aged or damaged?

Electricity leakage or

Is the product placed on an unstable surface or is

product body with electricity there a water leak in the machine?

Product cannot produce hot water

Is the power plug plugged in the socket properly?

Product cannot produce cold water
Product cannot produce hydrogen

Is the power plug plugged in the socket properly? Has the hydrogen production been completed or has the transparent water tank been free of bubbles? Is there any water in the small water tank?

Solution
Please plug the power plug for this product in the socket correctly. Please contact an external maintenance personnel. Please verify the condition of the filter, and clean or replace the filter in a timely manner. Please verify the condition of the filter, and clean or replace the filter in a timely manner. Please verify the condition of the filter, and clean or replace the filter in a timely manner.
Please contact acerpure customer service.
Please make sure the product is placed on a surface counter and check its water leakage Please plug the power plug for this product in the socket correctly. Please plug the power plug for this product in the socket correctly.
Please contact acerpure customer service.

Code

Malfunction Code Description

Possible cause
If the water production does not stop for 90 minutes, the malfunction light will turn on and E1 will be displayed in the numeric area of the LED.
When the water inlet circuit malfunctions, the malfunction light will turn on and E2 will be displayed in the numeric area of the panel.
When the water temperature thermal resistance is open, the malfunction light will turn on and E3 will be displayed in the numeric area of the panel.
When the inlet water temperature is in the range of 0-1°C, the malfunction light will turn on and E4 will be displayed.
Heating circuit board malfunction is detected.
The heating element temperature is too high.

Solution
1. When the filter is dirty, resulting in poor water production efficiency, it is recommended to replace with a new filter.
2. Please check if the filter is properly installed. 3. Please check if the water tank is properly installed.
Please contact acerpure customer service.
Please contact acerpure customer service.
Please use water that is 5-38°C.
Please contact acerpure customer service. Please stop using the heater first and wait for the temperature to decrease. Then, it will automatically return to normal.

12

Product specifications

Product name Product model Rated voltage

Ice, warm, instant hot water purifying dispenser
WP743-60W
110V/60HZ

Rated power Working water
pressure
Inlet water pressure
Suitable water temperature
Net amount

1500W 0.4~0.8Mpa 0.1~0.4Mpa
5~38°C 9.6 kg

Product dimensions

360x240x430mm

Country of origin

China

Company information

13

…………………………………………………………………………………………………………………………………………………….. 17 ………………………………………………………………………………………………………………………………………… 18 …………………………………………………………………………………………………………………………………………………….. 19 …………………………………………………………………………………………………………………………….. 20 …………………………………………………………………………………………………………………………………………………….. 23 …………………………………………………………………………………………………………………………………………………….. 25 …………………………………………………………………………………………………………………………….. 26 …………………………………………………………………………………………………………………………………….. 27 ………………………………………………………………………………………………………………………………… 28

1. 2. 3. 4.

1. 2.
3. 4. 5. 10° 6. 5°C38°C 7. 8. TDS
9.
10.
11. 12.
13. 14. 15.
17

++

22/M24 +

*4

WP743-60W

2PE*2

18

2. 2PE 2PE
3. PE

4. 2PE

  1. 19

1. &
2. 1PE PE
3.
4.
1
20

– 3 3
– TDS



-TDS
21

– *2 2
– 500ml
– 150ml
– 300mI

– 20%

-10 acerpure

-UV UV
-WP742-40W

22

Page 4 or 5

2

6-10 1-2 1

55

23

708595

150ml

50ml 150~500ml

300ml

50ml :150~500ml

24

PP

6-12 12-24 6-12

25

3 3

: WP743-60W

(Pb)

(Pb)

(Cb)

(Cr+6)

(PBB)

PBDE)

1. “0.1 wt%””0.01 wt%” 2. “” 3. “_”

26

?

acerpure acerpure

90 LED
E2
E3 0-1 E4

1. 2. 3.
acerpure
acerpure
5-38
acerpure

27

WP743-60W 110V/60HZ 1500W 0.4~0.8Mpa 0.1~0.4Mpa 5~38 9.6 kg
360x240x430mm

28

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals