acerpure AP352-10W Air Purifier User Manual

June 12, 2024
acerpure

acerpure AP352-10W Air Purifier logo

acerpure AP352-10W Air Purifier

Product Information

The Air Purifier is a household and office appliance designed to improve indoor air quality. It comes in two models: AP352-10W and AP552-10W. For more information about the product, please visit www.acerpure.com.

Product Usage Instructions

Safety Instructions

  • This product is for family and office use Do not use it for other purposes.

  • Check whether the power cable and plug are damaged before use.
    Do not bend or tug on the power cable in order to prevent poor connection.
    If the cord set is damaged, it must be replaced by a special cord set available from manufacturer or its service agent

  • Check whether the voltage is consistent when the indication on the voltage label of this product before use.

  • Switch off the power before unplugging the power plug. Do not touch the power plug with wet hands in order to prevent the danger of electric shock.

  • Children should be supervised to ensure they do not play with electrical appliances.

  • Use of this product without proper assembly is strictly prohibited; it is also prohibited to insert your hand or sharp objects into the grill of the air circulator to prevent accidents from occurring.

  • Do not hang clothes on the product, and do not use it at places with barriers or unstable places.

  • This product can be used by the children aged from 8 and above or person with physiological, perceptual, mental ability, experience or knowledge deficiencies under the supervision or guidance of the person responsible for their safeties.

  • Do not spray liquids such as volatile agents or insecticides on this product.

  • Do not use this product at places with high temperature (over 40°C), high humidity (such as bathrooms), dusty or where acid-base oils can easily spill.

  • Unplug the power plug if this product is not used for an extended period of time. Especially when there are emergencies such as thunder and lightning, earthquakes or fires, please switch off the power and unplug the power plug immediately.

  • This product only requires external cleaning and maintenance; do not clean the surface with rough cleaning tools, and do not rinse it with water directly.
    *Cleaning and user maintenance shall not be made by children.

  • If the product was accidentally immersed in water, please stop using it immediately and contact customer service personnel.

  • If you discovered any abnormalities such as noises, smoke or strange odors, please switch off the power immediately, unplug the power plug and contact customer service personnel.

  • This product may not be repaired or modified by repairers who are not authorized by our company. If the power cable is damaged, it must also be replaced by authorized repair personnel in order to avoid danger.

  • Please refer to the company information at the end of this manual on how to contact customer service.

Introduction to the Accessories

The Air Purifier comes with the following accessories:

  1. Filter
  2. Power cable
  3. User Manual + Warranty Card
  4. Hostacerpure AP352-10W Air Purifier 1

Product Structure

Product Assembly Method
  1. Air outlet
  2. LED display and control panel
  3. Air inlet
  4. Dust (PM2.5) sensor
  5. Filter cover handle
  6. 3- in-1 Plus HEPA filter (for AP352-10W)
    4-in-1 HEPA filter (for AP552-10W)acerpure AP352-10W Air Purifier
2

Introduction to the Panel Screen

  1. Smart Mode
    When operating in the Smart mode, the proper operation speed is adjusted automatically based on the air quality status (green, yellow, or red light). When you adjust to other speeds, the Smart symbol won’t be displayed on the panel.

  2. Purifier Wind Speed Button
    This product has a total of four purifier wind speeds (Smart Mode, Low , Middle , High and Turbo Mode). You can adjust the speed accord-ing to your needs. The product shows the speed status with a white line circulating around the

  3. Filter Change Indicator
    When this product has been operating for 3,000 and hold the power button for 3 seconds to switch off the filter indicator.

  4. Air Quality Indicator
    This product uses the three color lights of green, yellow, and red to indicate the PM2.5 particle level (good, OK or poor). The displayed button.
    When the filter cover is not covered properly on the product, red light will flashing on the panel.

  5. Quite mode
    3 seconds to enable quite mode and another 3 seconds to cancel it.

  • Note that once the quite mode is enabled, the product will adjust to low speed 15 seconds after adjustments are completed, the display panel will show the quite mode indicator only. 6. Power Button
    You can start or stop using this product.acerpure AP352-10W Air Purifier
3

Disassembling and Maintenance

Disassembly and Assembly of the Filter
  1. After switching off the power and unplugging the power plug, pull the handle on the filter cover behind the product backward.
  2. Remove the filter and replace it with a new filter.
  3. Place the filter cover back onto the product.
  • It is recommended to replace the filter every 3,000 hours.
  • When the filter indicator flashes, please remove the filter and replace or clean the filter based on the filter’s cleanliness.
  • After reinstalling the filter to this product, press and hold the power button for 3 seconds to switch off the filter change indicator.
  • Avoid tugging on the power cable during the disassembly process in order to prevent the power cable from breaking.
  • When using this product for the first time or replacing a new filter, please remove the packaging bag of the filter first and then start using this product.
Maintenance

This product only requires general external cleaning and maintenance (as shown in the figure).

  • Do not wipe with thinner, toluene, acidic cleansers, lamp oil, alcohol, or chemical cloth in order to avoid discoloration or deterioration.
  • Prior to cleaning or other maintenance, the appliance must be disconnected from the supply mains.

Please note: After maintenance and cleaning, wait for the product to fully dry before connecting power to use again or storing. If the product needs to be stored, please place the product back into the packaging box in the original packaging order, and place it at a dry location for safekeeping.

  • Use a vacuum cleaner to clean the dust in the air outlet and inlet.
  • Use a soft cloth to wipe the exterior and the sensor cover at the back of the product.

Checking Air Quality

You can learn the air quality of the room used based on the air quality indicator of this product. The indicator lights in the table below represent the level of PM2.5 removal.

Indicator color Recommended purifier wind speed
Green Low
Yellow Middle
Red High

Before Seeking After-sales Service

If you discovered that the product malfunctioned, please check the following items before contacting customer service.

Problem Possible cause Solution
Product does not turn on Is the power plug plugged in the outlet properly?

Please plug the power plug of this product in the outlet correctly.
Buttons of the control panel have no responses| Is the child lock function enabled?| Please press and hold down the purifier wind speed button for 3 seconds to disable the child lock function.
Red light keeps being displayed for the indoor air and cannot be purified| Is there excessive dust or harmful allergens accumulated on the filter?| Please clean the filter of the purifier properly, or replace the filter directly.
Are there other sundries around the product?| Please remove the sundries around the product.
Is the product placed in a corner?| Please move the product and place it elsewhere.
Is the product placed and used at a location that is too open or wide?| Please place the product in a suitable indoor space for use, and avoid placing it next to a ventilated window.
Is the indoor air itself seriously polluted?| Please ventilate the room first and then use this product.
When the noise is too loud| Is the product placed on an uneven floor or table top?| Place move the product to a flat floor or table top.

Product Specifications

Product Specifications

Product name| Air Purifier
Product model| AP352-10W (application to 3-in-1 Plus HEPA filter) AP552-10W (application to 4-in-1 HEPA filter)
Rated voltage| 110V/60Hz (Taiwan specifications only)
220-240V 50/60Hz
Rated power| 33W (Taiwan specifications only)
38W
Net weight| 4.2 kg
Product dimensions| 253 x 253 x 576mm
Place of origin| China

Correct Disposal of this product

This marking indicates that this product should not be disposed with other household wastes throughout the EU. To prevent possible harm to the en- vironment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resources. To return your used device, please use the return and collection systems or contact the retailer where the product was purchased. They can take this product for environmental safe recycling.
Company Information
For online user manual ,please find the files on www.acerpure.com.

References

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

acerpure User Manuals

Related Manuals