acerpure AF551-20W Air Circulator Fan Series User Manual
- October 30, 2023
- acerpure
Table of Contents
COZY Series
Air Circulator Fan
User Manual
Model: AF551-20W
Model: AF551-20W
Safety Instructions
This product is for home and office
Do not use it for other purposes.| Before using, check the AC adapter and
its plug for damage. To avoid poor contact. do not twist or pull the AC
adapter.
---|---
Before using, please check if the voltage on your power socket is compatible
with the
voltage label on the product| Turn off the power before pulling out the plug.
Do not touch the AC adapter with wet hands to avoid risks of electric shock.
This product can only be powered by the failures included AC adapter, to avoid
product
or fires.| Attend to your children and make sure that they do not tamper with
the product.
If you need to disassemble the product, make sure that the power is turned off
and the AC adapter is unplugged.| Do not store the button cell battery of the
remote control in places within reach of infants to prevent it from being
swallowed accidentally. If swallowed. please consult a doctor immediately.
To avoid product damage, do not use the product in a place where foreign
objects may be sucked into the circulation fan, such as curtains.| Do not use
the product without assembling and do not insert hands or pointed objects into
the circulation fan guard to avoid injuries. Do not let children play with
parts of the packages (such as plastic bags).
Do not hang clothes on the circulation fan guard and do not use the product on
unstable surfaces or in places with obstacles. If you need to place the
product on a stand, make sure that it is secured so that it won’t fell off the
stand in case of earthquakes or other emergencies.| This product is not
intended for use by persons (including children) with reduced
physical. sensory or mental capabilities, or lack of experience and knowledge.
unless they are using it in a safe manner and under the supervision of their
guardian.
Do not continuously to blow the baby or the patient directly for a long time.
Do not spray volatile agents. insecticides or other liquids on the product.|
Do not use the product in high temperatures (higher than 40’C), highly humid
places (such as bathrooms) or dusty places. Do not use the product where acid.
alkali or oil is stored.
If the product is not used for long periods of time, please unplug the AC
adapter.
More specifically. please turn off the power and unplug the AC adapter
immediately in the event of emergencies such as thunderstorms,
lightning, earthquakes or fires.| The The product only requires general
external cleaning. Do not use cleaning tools with rough surfaces and do not
rinse the product directly with water. The fan shall be used for temperate
climates and tropical climates.
If the product is accidentally immersed in water, please stop using it
immediately and contact customer service.| If the product is operand
abnormally, such as giving off noise. smoke. or odors. please turn off the
power and unplug the product immediately and contact customer service.
Do not repair or modify the product unless you are an authorized repair
technician of the company. If the AC adapter is damaged, it must be replaced
by an authorized repair technician to avoid dangers.| For customer service
contact information, please see the company information at the end of this
manual.
Product Introduction and Product Overview
Product Introduction
Product Overview
Product Assembly and Use
Product Assembly
Before using, please follow the steps below to assemble the product and keep
the packaging materials properly for future storage use.
Assembling the pedestal
Insert the column into the center hole of the pedestal, attach the pedestal
screw onto the pedestal and then use the included hex key wrench to tighten
the screw.
Assembling the circulation fan
Attach the circulation fan to the column and the product assembly is complete.
Connecting the AC adapter
Plug the power supply unit into the AC adapter connection port of the product
and turn on the power to start using the product.
Adjusting the vertical angle of the fan
The product can be adjusted in a vertical range of 0–90° to suit your needs.
You can directly adjust the angle with your hands.
Installing the remote control battery
| |
---|---|---
1. Gently press the button on the left side and pull
down the battery case to take it out.| 2. Place the battery such that the
positive pole (+)
faces upwards.| 3. Place the battery case back into the slot and fix
it into place.
Battery use precautions
- Do not store the battery in places within the reach of children or infants. If accidentally swallowed, please consult a doctor immediately.
- If the fluids leaking out of the battery come into contact with the eyes, do not rub the eyes. Rinse thoroughly with clean water and consult a doctor immediately. Please note that this may lead to vision loss.
- If the fluids leaking out of the battery come into contact with the skin or clothes, rinse with water immediately. Please note that this may lead to stains.
- If you need to dispose of the battery, please follow the local waste sorting requirements (and use clear tape to wrap both the “+” and “-” sides).
Using the remote control
Remote control precautions
- The remote control must face the signal receiver directly.
- The remote control shall be used within a distance of approximately 600cm from the signal receiver and facing towards the signal receiver. If the remote control is not facing towards the signal receiver, the effective distance will be decreased.
- Do not place any objects between the signal receiver and the remote control.
- Please store the remote control properly and avoid crashing or dropping it. Please remove the battery and store it properly when the remote control is not used.
Panel Introduction
Machine control panel
Power On/Off
You can use this button to power on/ off the product.| Left and Right Swing
Mode
Allow you to set the product to swing left and right. Press this button again
to stop swinging.
---|---
Circulation Speed
The product has 12 different speeds as well as a Turbo mode. You can choose
your desired speed or mode according to you needs.| Timer Mode
You can use the remote control to set the product to start/stop at a given
time. The
times will be simultaneously displayed on the machine control panel.
10-12
7-9 The indicator corresponding to your selected speed will be lit up.
4-6 The brightness indicates the speed level.
1-3
Turbo Mode (You can only use the remote control to switch into this mode)
Remote control panel
Power On/Off
You can use this button on the remote control to power on/off the product.
Left and Right Swing Mode
Press this button on the remote control to set the machine to oscillate
horizontally. Press this button again to stop the oscillation.
Circulation Speed Increase
You can use this button on the remote control to adjust the circulation speed.
Circulation Speed Decrease
You can use this button on the remote control to adjust the circulation speed
.
Turbo Mode
You can use this button on the remote control to switch into the turbo mode.
Timer Mode
You can use the remote control to set the product to start/stop at a given
time and use the “+”/”-” buttons on the remote control to adjust the time.
The maximum time range you can set is 12 hours.
Please note that when you are setting up timed start/stop, a flashing
indicator on the machine control panel means that you can adjust the time.
When the indicator stops flashing and is solid on, it means the timed
start/stop is successfully set.
Timed start
When the product is stopped but still powered on, you can press this button to
set a time to start the machine.
You can press this button again to cancel the timed start.
Timed stop
When the product is started, you can press this button to set a time to stop
the machine. You can press this button again to cancel the timed stop.
When the machine is started and there is not a timed stop, the machine will
automatically stop working after 24 hours without operation.
Silent Mode
When the machine is timed to start, you can press this button to enter the
Silent mode. You can press it again to exit the Silent mode.
Maintenance and Disassembly
Maintenance
The product only requires general external cleaning (as shown).
Do not use thinners, toluene, acid agents, lamp oil, alcohol or chemical wipes
to clean the product to avoid discoloration or degradation.
Please note that the product must not be powered on or stored away after
maintenance or cleaning until it has been fully dried. If you need to put away
the product, please put it in the packaging box and properly store in a dry
place.
Disassembly of the circulation fan
Before disassembling the circulation fan guard, make sure that the product has been powered off.
| |
---|---|---
1. Drive out the screw at the bottom of the circulation fan front guard.| 2.
Rotate the front guard counterclockwise.| 3. Back out the front guard and
remove the
circulation fan blades.
Before Contacting Customer Service
If you find a problem with the product, please check the following tips before contacting customer service.
Problem | Possible Cause | Solution |
---|---|---|
The product fails to start. | The power supply unit may not be plugged into the | |
power outlet. | Make sure that the power supply unit is properly plugged into |
the power outlet.
The circulation fan fails to run after the product is started.| There may be
foreign objects stuck in the circulation fan.| Please remove the foreign
objects from the circulation fan guard.
The noise is unusually big| Dust may have accumulated in the circulating fan.|
Please clean the circulating fan guard.
There may be foreign objects stuck in the circulation fan.| Please remove the
foreign objects from the circulation fan guard.
The floor or desktop where the product is placed may be uneven.| Please place
the product on an even surface or desktop.
The circulation fan blades may not be properly fitted on the motor shaft.|
Please properly fit the circulation fan blades on the motor shaft.
The remote control fails to work.| The battery may be dead.| Please replace
the battery. (Applicable model: CR2032)
The remote control may not be facing towards the product straight.| Please
change a position and face the remote control straight towards the signal
receiver.
Product Specifications
Air Circulation Fan Specifications
Product name| Air Circulator Fan
Product model| AF551-20W
Rated voltage/rated power| DC24V⎓/25W
Net weight| 3.92 kg
Product dimensions| 333.4 × 333.4 × 1000 mm
Country of origin| China
AC Adapter Specifications
Rated voltage/rated frequency| 100-240V–50/60Hz
Output voltage| DC24V⎓
The appliance is only to be used with the power supply unit provided with the
appliance.
The appliance must only be supplied at safety extra low voltage.
Company Info
www.acerpure.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>