HOLDO 3960 120 cm 1×120 LED Tube Light Fixture Instruction Manual
- July 20, 2024
- HOLDO
Table of Contents
HOLDO 3960 120 cm 1×120 LED Tube Light Fixtu
Warning
- Installation can be carried out by a qualified person only
DIMENSION
Installation Instructions
- All handling with the luminaire must be carried out only when the luminaire is disconnected from the mains.
- Remove the luminaire cover.
- Insert the sockets into the luminaire.
- Make holes for fixing the luminaire and connect the supply cable.
- Fix the luminaire to the ceiling and fit the luminaire cover.
- Insert the tube (T8) and rotate it 90°.
- Turn on the switch of the mains.
Installation Steps
- Turn off the power supply.
- Remove the luminaire cover.
- Insert the sockets into the luminaire.
- Make holes for fixing the luminaire and connect the supply cable.
- Fix the luminaire to the ceiling and fit the luminaire cover.
- Insert the tube (T8) and rotate it 90°.
- Turn on the switch of the mains.
Specifications
| Voltage | 220-240V |
|---|---|
| Frequency | 50/60Hz |
| Protection Class | IP20 |
| Certification | CE, RoHS |
| Socket Type | G13 |
FAQs
Who can install the luminaire?
Installation can be carried out by a qualified person only.
What should I do before handling the luminaire?
Ensure the luminaire is disconnected from the mains.
How do I insert the tube?
Insert the tube (T8) and rotate it 90°.
What is the voltage requirement for this luminaire?
The voltage requirement is 220-240V.
What certifications does this luminaire have?
This luminaire is CE and RoHS-certified.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>