B003MC1ZSE Simply Smooth Keratin Complete Kit Shampoo Instructions
- July 20, 2024
- SIMPLY SMOOTH
Table of Contents
B003MC1ZSE Simply Smooth Keratin Complete Kit Shampoo
Product Specifications
- Brand: Simply Smooth
- Product Type: Keratin Treatment
- Usage: Professional Use Only
- Recommended Hair Types: Virgin, Gray, Color Treated, Highlighted
Product Usage Instructions
Step 1: Pre-Clean Purifying Shampoo
Shampoo hair according to hair type:
- 5 times for virgin, gray, or resistant hair
- 4 times for color-treated hair
- 3 times for highlighted hair
Leave the shampoo on the hair for 30 seconds between each wash. For resistant hair, leave the shampoo on and apply heat for 5 minutes. Rinse thoroughly.
Step 2: Blow Dry
Blow dry hair completely without using brushes for smoothing. Keep the cuticle open.
Step 3: Application
Section the hair and wear gloves. Apply the product from the scalp to the ends using a tint brush. For Xpress, spray sparingly. Distribute evenly with a comb.
Step 4: Treatment Application
Let the product sit for 15-20 minutes, covering with a plastic cap. After the allotted time, blow-dry hair completely using a large rake comb.
Step 6: Post-Treatment Care
Advise the client not to wet their hair for 24-72 hours for desired results. Xpress can be shampooed after 24 hours, while Original Formula requires 72 hours.
Step 7: Maintenance
Recommend using Simply Smooth Xtend Maintenance system products for shampooing, conditioning, and styling.
FAQ
- Q: Can the product be used on all hair types?
- A: The product is recommended for use on virgin, gray, color-treated, and highlighted hair.
- Q: How long should the client wait before wetting their hair post-treatment?
- A: Clients should wait 24-72 hours before wetting their hair to allow for optimal results.
- Q: Is the product suitable for home use?
- A: The product is for professional use only and should be applied by trained professionals.
USING INSTRUCTIONS
Step 1: Shampoo hair using Simply Smooth Pre-Clean Purifying Shampoo.
Shampoo 5 times for virgin, gray, or resistant hair. Shampoo 4 times for
color-treated hair. Shampoo 3 times for highlighted hair. Leave product on
hair for 30 seconds between shampooing. If hair is resistant, leave Pre-Clean
Purifying Shampoo on hair and place under heat for 5 minutes. Rinse 100%. The
focus is to open the cuticle.
NOTE: For erratic texture, use Pre-Soft Keratin Primer from the Designer
Line before Pre-Cleaning for 5-20 minutes to even out the canvas and open the
cuticle on strong hair. For more information refer to the back of the bottle.
Step 2 : Blow dry hair 100%, keeping the cuticle open. No brushes, no
smoothing.
Step 3: Section the hair into desired sections. Be sure to wear gloves.
Shake the bottle well and begin to apply, using a tint brush, from scalp to
ends. If using Xpress, spray sparingly into the hair. Using a comb, distribute
the product evenly throughout the hair. Less is more.
Step 4 : Let sit for 15 minutes on normal hair and up to 20 minutes on
resistant hair, covering with a plastic cap. After the appropriate time has
elapsed, using a large rake comb, blow-dry hair 100% to begin closing the
cuticle. Do not brush the hair.
Step 5: Re-section the hair. Beginning at the nape of the neck, using 1/8
inch sections, begin flat ironing the hair from the base to the ends. Be sure
your iron is set between 375 to 450 degrees. For normal hair, set the
temperature to 450 degrees, and for finer hair, set the temperature to 400
degrees. For overprocessed hair, set as low as 375 degrees. Be sure to cure
Simply Smooth Keratin Treatment into the hair by repeating the smoothing
process with the 375-degree flat iron, more than one time per strand. For
virgin hair, apply the flat iron 5 times per section. For highlighted hair,
apply the flat iron 3-5 times per section. Work your way through each section
of the hair. The Cure irons are recommended, as they are designed to cure
Simply Smooth deep within the cuticle.
However, using different plates will produce different cures. Ceramic-light
cure. Tourmaline-medium cure. Titanium-strong cure. Use according to hair
texture.
Step 1: Shampoo hair using Simply Smooth Pre-Clean Purifying Shampoo.
Shampoo 5 times for virgin, gray, or resistant hair. Shampoo 4 times for
color-treated hair. Shampoo 3 times for highlighted hair. Leave product on
hair for 30 seconds between shampooing. If hair is resistant, leave Pre-Clean
Purifying Shampoo on the hair and place under heat for 5 minutes. Rinse 100%.
The focus is to open the cuticle.
NOTE: For erratic texture, use Pre-Soft Keratin Primer from the Designer
Line before Pre-Cleaning for 5-20 minutes to even out the canvas and open the
cuticle on strong hair. For more information refer to the back of the bottle.
Step 2: Blow dry hair 100%, keeping the cuticle open. No brushes, no
smoothing.
Step 3 : Section the hair into desired sections. Be sure to wear gloves.
Shake bottle well and begin to apply, using a tint brush, from scalp to ends.
If using Xpress, spray sparingly into the hair. Using a comb, distribute the
product evenly throughout the hair. Less is more.
Step 4 : Let sit for 15 minutes on normal hair and up to 20 minutes on
resistant hair, covering with a plastic cap. After the appropriate time has
elapsed, using a large rake comb, blow-dry hair 100% to begin closing the
cuticle. Do not brush the hair.
Step 5 : Re-section the hair. Beginning at the nape of the neck, using
1/8 inch sections, begin flat ironing the hair from the base to the ends. Be
sure your iron is set between 375 to 450 degrees. For normal hair, set
temperature to 450 degrees and for finer hair, set the temperature to 400
degrees. For overprocessed hair, set as low as 375 degrees. Be sure to cure
Simply Smooth Keratin Treatment into the hair by repeating the smoothing
process with the 375 degree flat iron, more than one time per strand. For
virgin hair, apply the flat iron 5 times per section. For highlighted hair,
apply the flat iron 3-5 times per section. Work your way through each section
of the hair. The Cure irons are recommended, as they are designed to cure
Simply Smooth deep within the cuticle.
However, using different plates will produce different cures. Ceramic-light
cure. Tourmaline-medium cure. Titanium-strong cure. Use according to hair
texture.
Steps 4 & 5: Must be performed in a well-ventilated area.
Step 6 : Be sure to inform the client not to wet their hair for 24-72
hours, to allow the hair to be transformed into the desired smooth results.
Keratin Treatment Xpress may be shampooed as soon as 24 hours. The Original
Formula must wait 72 hours.
Step 7: Be sure the client maintains the hair with the Simply Smooth
Xtend Maintenance system products. Hair should be shampooed with Simply Smooth
Xtend Keratin Shampoo, Conditioned with Simply Smooth Xtend Keratin
Conditioner, and styled with the Simply Smooth Xtend Keratin Styling and
Finishing
products: Must be performed in a well-ventilated area.
Step 6 : Be sure to inform the client not to wet their hair for 24-72
hours, to allow the hair to be transformed into the desired smooth results.
Keratin Treatment Xpress may be shampooed as soon as 24 hours. The Original
Formula must wait 72 hours.
Step 7 : Be sure the client maintains the hair with the Simply Smooth
Xtend Maintenance system products. Hair should be shampooed with Simply Smooth
Xtend Keratin Shampoo, Conditioned with Simply Smooth Xtend Keratin
Conditioner, and styled with the Simply Smooth Xtend Keratin Styling and
Finishing products
FOR PROFESSIONAL USE ONLY
Technical support is always available at:
1-888-333-6563 or for further visual
education on Simply Smooth Professional keratin tutorials, please visit
www.americanculturebrandspro.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>