Commomy Decor 30 cm x 30 cm x 0.3 cm Stone Texture Peel and Stick Wall Tile User Manual
- July 25, 2024
- Commomy Decor
Table of Contents
STONEBLOCKS
USER MANUAL
Product Details
- Product Type: Stone Texture Peel and Stick Wall Tile
- Primary Material: Vinyl
- Finish: Brown
- Surface Type: Matte
- Water Resistant: Yes
- 10 Sheets Per Pack, Each Sheet Measures 30 cm x 30 cm x 0.3 cm
Easy Installation Steps:
- Start by taping the wall or floor; if the tape sticks, our product will adhere as well.
- Measure the area of the floor or wall to be covered. Calculation method: Length x Width = Area, then use the total area ± product area = the quantity needed for purchase. (To avoid color discrepancies, buy extra sheets at once)
- Before use, clean any dust from the floor or wall. If there are any uneven areas, use wall repair paste or similar products to patch and smoothen them.
- After measuring the area to be covered, peel off the backing layer and stick the tile to the wall or floor. When installing in corners, use scissors to cut as the product should not be bent directly to cover the corners to ensure proper adhesion.
- After sticking, press firmly by hand to ensure good contact between the adhesive and the surface.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>