LG Canada LDPH5554S Built In Dishwashers Instructions
- July 25, 2024
- LG Canada
Table of Contents
LG Canada LDPH5554S Built In Dishwashers
This quick install guide is designed to eliminate the need for the owner’s manual. For complete installation details, refer to the owner’s manual included with the dishwasher.
-
The warranty does not cover product failure or damage that is caused by improper installation.
-
The dishwasher must be installed to allow for future removal from the enclosure if service is required.
-
If you have questions, call 1-800-944-9044 for assistance.
Installing
Step 1 – Drill Hole in Cabinet
Drill a 1-1/2″ diameter hole in the cabinet wall within the shaded area shown for the drain hose, water line, and electrical wiring. The hole should be smooth with no sharp edges.
Step 2 – Prepare Electrical Wiring
See the Installation Instructions for details on electrical requirements.
- Ensure the house wiring, the water line, and the drain hose are routed through the hole in the cabinet.
- Position the dishwasher in front of the cabinet opening.
Step 3 – Remove Disposal Plug
If you connect to a sink disposal, you must remove the disposal plug. Refer to the disposal manual for instructions.
Step 4 – Install Drain Hose
Install the drain hose to the dishwasher drain port. Use a hose clamp to secure it.
Step 5 – Slide the Dishwasher into Cabinet
Slide the dishwasher into the cabinet opening. Make sure the drain hose is not kinked.
Step 6 – Check Dishwasher Balance
Check that the dishwasher is level and adjust the legs if necessary.
Step 7 – Attach the Installation Brackets
Attach the installation brackets to the top or sides of the dishwasher and secure them to the cabinet.
Step 8 – Connect Water Supply
Connect the water supply line to the dishwasher inlet valve. Turn on the water supply and check for leaks.
Step 9 – Connect Electrical Wiring
Connect the electrical wiring to the dishwasher. Refer to the Installation Instructions for details.
Step 10 – Test the Dishwasher
Run a test cycle to ensure the dishwasher is operating correctly.
Installation Tips
- Place this dishwasher close to the sink for easy access to water supply and drain lines.
- Do not push the dishwasher into the cabinet opening by the door. Use the sides for pushing.
- Ensure the dishwasher is level to prevent leaks and ensure proper operation.
Warnings
WARNING: Cancer and Reproductive Harm – www.P65Warnings.ca.gov (USA Only)
Handling Instructions
Do not truck from front. Truck from side.
FAQs
What should I do if the dishwasher is not level?
Adjust the legs of the dishwasher until it is level. This will prevent leaks and ensure proper operation.How do I connect the drain hose?
Install the drain hose to the dishwasher drain port and secure it with a hose clamp.What should I do if there is a leak?
Check all connections for tightness and ensure the dishwasher is level. If the leak persists, refer to the owner’s manual or contact customer service.Can I push the dishwasher into the cabinet by the door?
No, you should use the sides of the dishwasher to push it into the cabinet opening to avoid damaging the door.Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>