TAGA Harmony TWA-10B Wireless Streaming Adapter User Guide
- July 17, 2024
- TAGA HARMONY
Table of Contents
QUICK GUIDE
TWA-10B FIRMWARE – IMPROVEMENTS and FIXES
The settings, options and operations are presented for the 4STREAM
application.
Firmware version: 4.6.606043.48
TIDAL – support for flac files with quality up to 24bit/192kHz ().
() via Connect using the dedicated TIDAL application (mobile or desktop
version).
Active Output Selection
To ensure even smoother operation of the player, only one type of output may
be used simultaneously now: ether the analog output (LINE) or the digital
outputs (OPTICAL and COAXIAL).
Choose Settings of your Device.
Audio Settings option indicates the selected Active Output.
Note! Audio signal will be transmitted only through the selected output (other outputs will be inactive).
Tap on Audio Settings to open the output selection page.
The currently Active Output is indicated with a checkmark ( ).
To change the Active Output, tap on the Aux Out or SPDIF Out.
Fade-In & Fade-Out Effects
This option is available in the Audio Settings.
Select this option to enable smooth transition between tracks, eliminating
clicks and pops.
SPDIF Out (Optical and Coaxial) Settings
After SPDIF Out is selected in Audio Settings, additional options are
available:
Sample rate switch latency (in ms).
SPDIF Output Resolution
Tap on the desired Sample rate and Bit depth and Done to save the selection.
Note! Operation and user interface may vary depending on the mobile
device model and its operating system.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>