PATONA BY-V2 Wireless Microphone Set for iPhone User Manual
- July 18, 2024
- PATONA
Table of Contents
PATONA BY-V2 Wireless Microphone Set for iPhone
Specifications
- Power: DC 5V/1A
- Radio Frequency: 2.4GHz – 2.44GHz
- Receiver: Via Lightning cable or iPhone/iPad Lightning connector
- Working Current: < 11mA
- Standby Power Consumption: < 55uA
- Response Frequency: 20Hz-20KHz
- Sensitivity: 35dB
- Sampling Rate : 48K
- Signal to Noise Ratio: > 75dB
- Battery: 50mAh Li-Polymer (up to 4 hours of operation)
- Charging: USB charging (AC adapter not included)
Product Usage Instructions
Receiver:
- Connect the receiver by inserting the Lightning connector into the Lightning port of your iPhone.
- LEDs Indication:
- RED/BLUE (blinking): Receiver and transmitter paired.
- RED (solid): Pairing properly active.
Transmitter:
- Ensure no moisture enters the microphone for sound pickup.
- LEDs Indication:
- RED/BLUE (flashing): Receiver and transmitter are paired.
- RED (solid): Pairing properly active.
- Charging:
- RED (solid): Battery is charging.
- OFF: Battery is fully charged.
- USB-C Charging Port:
- Use a DC 5V/1A power adapter/charger (not included).
- Power input type: Lightning.
- Power Button:
- Press and hold for about 5 seconds to turn on/off.
- Press briefly to mute or unmute the microphone. LED flashes blue and red alternately when muted.
Frequently Asked Questions (FAQ)
-
How long does the battery last on a full charge?
The battery lasts up to 4 hours on a full charge. -
How do I know if the microphone is paired with the receiver?
The RED/BLUE LEDs will flash when the receiver and transmitter are paired, and the RED LED will be solid when pairing is properly active.
Please read the instructions carefully and keep them for future reference.
PRODUCT OVERVIEW
The Receiver
-
Connecting the receiver
Insert the Lightning connector into the Lightning port of your iPhone. -
LEDs
-
RED/BLUE (blinking):
Receiver and transmitter paired. -
RED (solid):
Pairing properly active.
-
The transmitter
-
Sound pickup/microphone
Prevent moisture from entering the microphone. -
LEDs
-
RED/BLUE (flashing):
Receiver and transmitter are paired. -
RED (solid):
Pairing properly active.
When charging: -
RED (solid):
Battery is charging. -
OFF:
The battery is fully charged.
-
-
USB-C charging port
- You will need a DC 5V/1A power adapter/charger (not included).
- Power input type: Lightning
-
Clamp
Used to attach to clothing, for example. -
Power Button
-
Press and hold the power button for about 5 sec to turn on/off.
-
Press briefly to mute or unmute the microphone. If muting is active, the LED flashes blue and red alternately.
Technical data
Power | DC 5V/1A |
---|---|
Radio frequency | 2.4GHz – 2.44GHz |
Receiver | Via Lightning cable or iPhone / iPad Lightning connector |
Working current | < 11mA |
Standby power con- sumption | < 55uA |
Response Frequency | 20Hz-20KHz |
Sensitivity | 35dB |
Sampling rate | 48K |
Signal to noise ratio | > 75dB |
Battery | 50mAh Li-polymer up to 4 hrs operation. Charging via USB (AC adapter, |
not included).
Warnings/Notices:
- Do not open or disassemble the product or its accessories.
- Attention small parts! Not suitable for children.
- Keep the product away from moisture and high heat.
- Use only compatible accessories.
- Protect the product from strong impacts and shocks.
- Improper use will void the warranty.
- Dispose of the product according to the guidelines in your country.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>