LaserLight3 VESA75/100 VESA Bracket Pole Mount Instruction Manual
- June 9, 2024
- LaserLight3
Table of Contents
LaserLight3 VESA75/100 VESA Bracket Pole Mount
VESA Pole Mount Installation
This document contains a replacement parts lists and instructions for installing optional VESA pole mount kit (PN 212745).
NOTE: The VESA pole mount kit is compatible with or without the LaserLight3 optional visor kit (PN 214693).
Manuals and additional resources
are available from Rice Lake Weighing Systems at
www.ricelake.com/manuals
Warranty information can be found at
www.ricelake.com/warranties
CAUTION: The LaserLight3 does not have a power switch. Before working with the unit, ensure the power cord is disconnected from the power outlet.
Product Description
Table 1. VESA Pole Mount Parts
| Part No. | Description | Qty |
|---|---|---|
| 212746 | VESA Bracket | 1 |
| 177867 | Pole Clamping Bracket | 1 |
| 177871 | Carriage Bolt, 3/8-16 x 4-1/2 in | 2 |
| 177872 | Carriage Bolt, 3/8-16 x 6 in | 2 |
| 21938 | Washer, 3/8 in | 2 |
| 22072 | Hex Lock Nut, 3/8 in | 2 |
| 214485 | Machine Screw, M4 x 0.7 x 14 Phillips Pan Head | 6 |
| 180856 | Internal Tooth Washer, M4 | 6 |
| 193381 | Plain Washer, M4 | 6 |
Installation
The VESA pole mount kit is attached directly to the back of the Laserlight3. Perform the following to install the VESA pole mount kit:
-
Unplug LaserLight3 from power source.
-
Place LaserLight3 on work surface.
-
Remove six mounting screws and washers securing the standard mounting bracket to the LaserLight3.
-
Remove the standard mounting bracket from LaserLight3.
-
Slide carriage bolts into VESA pole mounting bracket.
NOTE: There are two carriage bolts lengths (3/8-16 x 6 Inch and 3/8-16 x 4-1/2 Inch) provided and two installation positions, choose carriage bolts and positions that are suitable for application. -
Attach pole mounting bracket to LaserLight3 with six machine screws internal tooth washers and plain washers.
-
Torque screws to 20-30 in-lb (2.26-3.39 N-m).
-
Position pole in-between carriage bolts of pole mounting bracket.
-
Slide clamp bracket onto carriage bolts then secure with 3/8 in washers and 3/8 in hex lock nuts.
NOTE: The pole mounting assembly has two sets of mounting holes. Each sets of bracket mounting holes are for alternate diameter poles. The inner mounting holes are used for smaller diameter poles (up to four inch diameter) while the outer mount holes are used for larger diameter poles (up to six inch diameter). -
Tighten lock nuts as necessary.
© Rice Lake Weighing Systems Specifications subject to change without notice.
230 W. Coleman St. • Rice Lake, WI 54868 • USA
U.S. 800-472-6703 • Canada/Mexico
800-321-6703 • International
715-234-9171 • Europe +31 (0)26 472
1319
References
- Rice Lake Weighing Systems
- Manuals | Rice Lake Weighing Systems
- Warranties
- Rice Lake Weighing Systems
- Manuals | Rice Lake Weighing Systems