MAXIM LIGHTING 10227GY Prime Acoustic 25 LED Flush Mount Installation Guide
- July 19, 2024
- MAXIM LIGHTING
Table of Contents
MAXIM LIGHTING 10227GY Prime Acoustic 25 LED Flush Mount
Before Getting Started
Read the instructions carefully prior to assembling the product.
When you open the package with a sharp tool like a box knife, be careful not to damage the components inside.
Carefully remove all packaging materials and retain for future use.
Keep all hardware parts and packaging out of reach of children.
Choose a clean, level, spacious assembly area. Avoid hard surfaces that may damage the product.
Ensure that you have all required contents for complete assembly.
Take care when lifting. Assemble the product in close proximity to where you intend to install it.
Do not over tighten the screws and bolts as this may damage the threads.
Do not let children play with this product.
Risk of suffocation!
Keep packaging materials away from children.
Lamp Care Instructions
Carefully read through the instruction sheet before assembly and using the product.
caution
there is a risk of shock!
Disconnect from power source before assembling or cleaning.
Switch off, unplug and allow bulb to cool before replacing bulb or cleaning.
Only use the recommended bulb type and do not exceed the maximum wattage as it could cause fire.
Check the product cord to be sure is free torn or frayed.
Cleaning & Maintenance
On polished finishes, often using talc powder can reduce the appearance of fingerprints and other smudges.
For respective shade surfaces, use the appropriate cleansers, i.e. glass cleaner, stone polish, & wood polish.
Clean with soft cloth and a mild detergent. Do not use abrasive or harsh cleaners.
Periodically (every 90-180 days) make sure that the screws are fully tightened.
Prolonged exposure to heat sources may cause glazing, melting and scorching, or even cause color to fade.
PARTS
Before getting, started, ensure the package contains the following components:
A| 
| x1
---|---|---
B|
Screw
8/32”x1.1″
| x2
C| 
| x2
D|
Screw
8/32”x0.23″
| x3
E| | x3
F| 
| x1
G| 
| x1
H| 
| x1
I| 
| x3
J| 
| x3
k|
Wood screw x2″
| x3
OVERVIEW
|
DIMMER COMPATIBILITY
Must be Installed by an Experienced professional CRITICAL KNOWLEDGE of electronic lighting systems required.
VERIFIED LIST OF TESTED DIMMERS
- Lutron Diva DVCL-153P
- Lutron Diva DVELV-300P
- Lutron Diva Caseta PD-6WCL
- Lutron Maestro MACL-153M
- DEAKO-Smart Dimmer
- DEAKO-Single Dimmer
- LEVITON 6672-L
- LEVITON DSL
GENERAL COMPATIBILITY
TR/AC/ FORWARD PHASE
ELV / REVERSE PHASE Only at 120VAC
Due to inrush current, wattage should not exceed 150W on a 600W dimmer
IMPORTANT!
If the control is not paired properly to LED fixtures, irreparable damage may occur.
If the dimmer you are using is not listed here, consult a lighting professional or view our Dimming Compatibility Chart online: https://www.maximlighting.com/led-dimme
CUSTOMER SUPPORT
Please consult a qualified electrician prior to install
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>