MAXIM LIGHTING 10220 16W LED Flushmount Installation Guide
- July 17, 2024
- MAXIM LIGHTING
Table of Contents
MAXIM LIGHTING 10220 16W LED Flushmount Installation Guide
Before Getting Started
Read the instructions carefully prior to assembling the product.
When you open the package with a sharp tool like a box knife, be careful not
to damage the components inside
Carefully remove all packaging materials and retain for future use.
Keep all hardware parts and packaging out of reach of children.
Choose a clean, level, spacious assembly area. Avoid hard surfaces that may
damage the product.
Ensure that you have all required contents for complete assembly.
Take care when lifting, Assemble the product in close proximity to where you
intend to install it.
Do not over tighten the screws and bolts as this may damage the threads
Do not let children play with this product.
Risk of suffocation!
Keep packaging materials away from children.
Lamp Care Instructions
Carefully read through the instruction sheet before assembly and using the
product.
Caution there is a risk of shock!
Disconnect from power source before assembling or cleaning.
Switch off, unplug and allow bulb to cool before replacing bulb or cleaning.
Only use the recommended bulb type and do not exceed the maximum wattage as it
could cause fire.
Check the product cord to be sure is free torn or frayed.
Cleaning & Maintenance
On polished finishes, often using talc powder can reduce the appearance of
fingerprints and other smudges.
For respective shade surfaces, use the appropriate cleansers, i.e. glass
cleaner, stone polish, & wood polish.
Clean with soft cloth and a mild detergent. Do not use abrasive or harsh
cleaners.
Periodically (every 90-180 days) make sure that the screws are fully
tightened.
Prolonged exposure to heat sources may cause glazing, melting and scorching,
or even cause color to fade.
PARTS
Before getting, started, ensure the package contains the following components:
A| 
| x1| (B)| | )x2
---|---|---|---|---|---
C| | x2| (D|
Screw 8/32″x0.23| x3
E| | x3| F| 
| x1
G| 
| x1| H| | x1
I| 
| x3| | |
VERIFIED LIST OF TESTED DIMMERS
Lutron Diva DVCL-153P
Lutron Diva DVELV-300P
Lutron Diva Caseta PD-6WCL
Lutron Maestro MACL-153M
DEAKO-Smart Dimmer
DEAKO-Single Dimmer
LEVITON 6672-L
LEVITON DSL06
GENERAL COMPATIBILITY
TRIAC /FORWARD PHASE
ELV /REVERSE PHASE
Only at 120VAC
Due to inrush current, wattage should not exceed 150W on a 600W dimmer
IMPORTANT
If the control is not paired properly to LED fixtures, irreparable damage may
occur.
If the dimmer you are using is not listed here, consult a lighting
professional or view our Dimming Compatibility Chart online:
https://[www.maximlighting.com](http://www.maximlighting.com)/led-
dimmer
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>