HYTE Thicc FP12 Digital Immersion Lighting and Digital Cooling Owner’s Manual
- July 17, 2024
- HYTE
Table of Contents
HYTE Thicc FP12 Digital Immersion Lighting and Digital Cooling
OVERVIEW
- A. Nexus Portal NP50
- B. NP50 Power and USB Cable
- 1. USB 2.0
- 2. PWM Input
- 3. PCIE 6 Pin Power
- C. NP50 Thermal Sensor and PWM Cable
- 1. PWM Output
- 2. Thermal Sensor
- D. LS10 qRGB Light Strip
- E. LS30 qRGB Light Strip
- F. THICC FP12 120mm Fan
- G. LS10/30 Mounting Clip
- H. Nexus Link Type-C Cable
- I. Nexus Link Type-C Cable
- J. Nexus Link Type-C Cable
- K. Nexus Link Type-C to PWM Adapter
- L. Nexus Link Type-M to Type-M Cable
- M. Nexus Link Type-M to Type-C Cable
- N. Nexus Link Type-C to Type-M Cable
- Nexus Link Type-M Male Connector
- Nexus Link Type-M Female Connector
- Nexus Link Type-C Male Connector
- Nexus Link Type-C Female Connector
Connection
- Take the NP50 (A) and remove the cover shroud for port access.
- Plug the NP50 Power and USB Cable (B) into the NP50 (A).
- (Optional) Plug the NP50 Thermal Sensor and PWM Cable (C) into the NP50 (A).
- Plug any needed Nexus Link Type-C Male (H/I/J/N) ends into the available Type-C
Female NP50 channels (A).
- NP50 (A) can be mounted to a 2.5″ drive bay with included screws or to any available surface using the included adhesive strips.
For the NP50 Thermal Sensor and PWM Cable (C), the thermal sensor can be placed in any desired location in the system. The PWM Output can be used to connect 3rd party fans to NP50. The maximum current output of this cable is going to match the maximum current output of the motherboard header that the PWM Input from the NP50 Power and USB Cable (B) is connected to.
Required Current
- D. 0.2A-
- E. 0.6A
- F. 0.1A@1,000 RPM, 0.2A@2,000 RPM, 0.8A @3,000 RPM
- NP50 can power up to 18 devices on a single channel with 8A of current, and up to 54 devices across all three Type-C channels with 15A of current.
The Q60 Type-M channel can power up to 18 devices (including 2x preinstalled FP12 fans) with 6.2A of current. Please note that the Type-M channel will reserve 1.6A at all times to operate both radiator FP12 fans up to their max RPM.
- Q60 can power up to 34 devices across both Type-C and Type-M channels with 14.2A of current.The Q60 Type-C channel can power up to 18 devices with 8A of current.
- Connect LS10/LS30 directly to one another via Nexus Link Type-C.
- Built-in magnets allow you to mount LS10/LS30 to metal surfaces with ease.
- Connect FP12 fans directly to one another via Nexus Link Type-M.
- Connect FP12 fans to legacy PWM motherboard headers using the included Nexus Link Type-C to PWM adapter cable.
- Mix & match cables as needed to adapt between Nexus Link Type-C/Type-M and reach longer distances between devices with ease.
- Download HYTE Nexus to fully customize and control your devices. https://hyte.com/nexus.
- hyte.co/nexus-link-ecosystem.
- hyte.co/nexus.
Warranty Length for Parts
- LS Series Light Strips – 3 Years
- THICC FP Fans – 6 Years
- NP Series Nexus Portal – 3 Years
HYTE Limited Warranty
- This product is covered by a limited warranty, please visit HYTE.com to obtain a full copy of the written warranty or contact us using one of the methods below.
CONTACT
- Support@HYTE.com | American Future Technology dba HYTE by iBUYPOWER
- 529 N Baldwin Park Blvd., City of Industry, CA 91746, USA
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>