Southwest Speed 105-3510 Steering Box Instructions
- July 17, 2024
- Southwest Speed
Table of Contents
1967-70 MUSTANG MANUAL STEERING BOX
SWS PART # 105-3510
105-3510 Steering Box
IMPORTANT!!! It is critical that the steering box be at the center
position BEFORE installation.
Incorrect centering will cause loose steering and premature wear. You should
feel the box tighten when at the center.
NOTE: All boxes are pre-lubricated and pre-adjusted to factory
specifications.
DO NOT ADJUST THE STEERING BOX!!!
- Place the steering box in a bench vise and be certain the box is held securely.
- Place a %’-36 u-joint on the input sector shaft
- Turn the shaft to the right (clockwise) all the way to the right lock.
- Turn the shaft to the left (counter clockwise) all the way to the left lock. (approx. 4 turns)
- Turn the shaft to the right (clockwise) half the number of turns. (approx. 2 turns) You should feel the box tighten when at the center.
- Align the wide spline on the box with the center the casting.
Pinion Shaft
Size:
3/4”-36
Pitman Shaft
Thread:
7/8”-14 J
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>