Rubik s HA-XKD01 Cube Star Projector User Manual
- June 5, 2024
- Rubik s
Table of Contents
Rubik’s Cube Star Projector
User Manual
HA-XKD01
Important Safety Notes:
Employ safety measures when you are using the electrical equipment to avoid
risks such as fire hazards, electric shock, and any injury.
All prevention measures include but are not limited to
Note-Only use the product according to instructions;
Please carefully read all instructions prior to your use;
Attention! Please use the product according to all instructions;
It is for indoor use only. Please note that the product isn’t water-resistant,
so do not use the product outdoors when it rains to avoid any damage incurred
by water inflow;
Please contact the dealer to acquire maintenance services in case of any
damage. Do not try to assemble or dismantle the product via any method. Users
aren’t allowed to disassemble the product without authorization. Otherwise,
our company isn’t liable for any damage caused by unauthorized disassembly;
The product is made of laser, ripple lamp. Keep away from children and avoid
directly exposing eyes to the laser beam.
Open the Package to Check
Thanks for your purchase, and please carefully read the user manual prior to
your use; The user manual contains all necessary safety suggestions and
instructions. Please operate the product according to all instructions
specified in the user manual to avoid any damage incurred by wrong operations;
Please check whether all items are in good condition when you receive the
package.
Packing List:
Rubik’s Cube Star Projector 1
USB Charging Cable1
Story Book 1
Remote Control 1
Power Supply (Optional) *1
Statement
Our products have gone through comprehensively severe tests before they are
delivered to customers, and all users should strictly comply with all warnings
and instructions. Improper use may damage the product, which isn’t concluded
by the warranty scope.
How to use:
- Indoor use, a project to the sky.
- How to use the projector is shown in the figure below.
- Connect Bluetooth ” HA-XKDO1″ on a smartphone to play music.
5V/2A TYPE-C Port
Functions of Remote Control
- Power key (equivalent to the master switch of all keys). When power is off, all lights and Bluetooth music are turned off
- Laser switch: Press the laser switch once to power off, and press again to power on (circulate);
- Control the On / Off of the water pattern lamp
- Control the movement speed of the water pattern (from stop to fast)
- Reduce the movement speed of the water pattern (from fast to stop)
- Volume up
- Volume down
- Previous track
- Next track
- Control music Play / Pause
- Water pattern mode selection: single color cycle/multi-color cycle switching
- Press “W” to turn on the white light; press again to turn off the white light (Note: four color buttons, that is, RGBW, can form two-color projection through two combinations)
- Press “R” to turn on the red light; press again to turn off the red light
- Press “G” to turn on the green light; press again to turn off the green light
- Press “B” to turn on the blue light; press again to turn off the blue light
- Control the brightness of LED water pattern lamp (cycle in the order of 100% – 75% -50% – 25% brightness)
- Switch between constant on or gradual change mode of laser
- Voice-control switches
- Cancel the timing function. The nebula lamp flashes three times, and the timing is canceled successfully
- Timing for one hour. The nebula lamp flashes three times, timing succeeds
- Timing for two hours. The nebula lamp flashes three times, timing succeeds
Note: The product comes with a 4h auto shutdown function. It means that it will automatically power off after continuous 4h working.
Specifications
Power: 7.5W
Input Power: 100-240V AC 50/60Hz 1.5A (when working with transformer)
Purpose: Indoor use
Power Parameters:
Working Voltage: AC100V-240V/ 50-60Hz
Output Voltage: 5VDC
Output Current: 2A
Rated Output Power: 10W
FCC Statement
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Caution: Any changes or modifications to this device not explicitly approved by the manufacturer could void your authority to operate this equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
RF Exposure Information
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
a minimum distance of 20cm between the radiator and your body.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>