0224249 P2 Milk Air Remover Tommee Tippee Instructions
- July 16, 2024
- Tommee Tippee
Table of Contents
224249 P2 Milk Air Remover Tommee Tippee
Instructions
0224249 P2 Milk Air Remover Tommee Tippee
Here for you
Feeding a baby who is experiencing colic symptoms can be stressful.Colicsoothe
is here to help support you and your baby by reducing the amount of air your
baby ingests. Air ingestion is one of the things that can cause baby
discomfort during feeding.
Using innovative vacuum technology this product draws air out of the milk,
which can be introduced to milk during the preparation of your bottle, usually
by shaking to mix formula. We recommend stirring your formula to minimise
this.
If your baby is experiencing colic symptoms you can also use our advanced
anti-colic™ bottle which removes air from the bottle whilst baby is feeding.
This along with colicsoothe will give you the best chance of reducing air
ingestion throughout your feeding routine.
Questions?
Contact our customer care team on 1-800-096-938 Or scan the QR code to watch a
video on how to use
A Lid
B Chamber
C USB power cable
D USB power adaptor
E Start button
F Light
G Pressure release valve
| Light colour | Meaning/Action |
|---|---|
| Flashing red light | Charge immediately |
Device not on a flat surface when in use
Cycle failed hasn’t reached full pressure
Static red light| Low battery 20% or less
Static green light| Cycle in progress
Flashing green light| Cycle complete
Preparing for use
When preparing a bottle for baby, ensure hands, surfaces and the product are thoroughly clean and dry.
How to charge
-
Charge before first use using the USB cable and adaptor provided.
It will take approximately 4 hours to fully charge. -
When the unit has 20% battery left a red light F will appear. When the red light F is flashing you must charge the product.
-
The product is fully charged when the light turns green F.
How to use
Ensure the product has charge and is on a flat and stable surface prior to using.
-
Prepare your bottle as per the manufacturer’s recommendation if using formula. Once ready place into the chamber B . Breast milk can also be used.
-
Before placing into the chamber, remove the lid, teat and screw ring of your bottle and place the bottle base ONLY into the chamber B .
-
Now place the lid A onto the chamber B , and screw on tightly keeping the product on a flat surface.
-
Press the start button E for approximately 2 seconds to startthe air removal cycle. The green light F will show and you will heara sound to indicate the vaccum system has started, this will last up to 60 seconds. After approximately 60 seconds the sound will stop, however the air removal cycle will continue.
The total time is approximately 3 minutes.
Note: Keep the device upright, the air removal cycle will stop if the device is tipped. green in progress -
When the air removal cycle is finished the green light will flash.
-
Before removing the lid, press and hold the pressure release valve G .
You will now hear air being drawn into the lid A. Once this stops, keep holding the release valve G for a further 10 seconds. You will now be able to remove the lid by turning it anticlockwise. -
Carefully remove your bottle from the chamber B Attach your screw ring and teat, and feed. DO NOT shake the bottle once your milk has been through the air removal cycle, as this will put air back into the milk.
Use the prepared milk immediately.
Note: If any milk is spilt into the chamber, see below for cleaning methods.
How to clean
The lid A is wipe clean only.
The chamber B can be hand washed only with warm soapy water and then rinsed.
DO NOT CLEAN IN THE DISHWASHER, OR STERILISE.
Troubleshooting
Green/red light is flashing and my product is not working.
Make sure your product is on a flat surface, then press the start button E .
Your product will not operate if the device is tilted.
My product won’t switch on (no green light).
Ensure the unit is fully charged, connect the USB cable to a USB adaptor,and
plug it in. Once the green light F is on, the unit is ready to use.
Charging from an empty battery will take approximately 4 hours.
I can’t remove the lid.
After the air removal cycle has finished (approximately 3 minutes) , follow
point 6.
Safety information
IMPORTANT WARNINGS
These instructions can also be found at
www.tommeetippee.com
Please read and retain the instruction guide for future reference as it
includes important information.
-
Adult use only – Keep all components out of the reach of children.
Do not allow a child to play with it – It is not a toy. -
Do not operate if there is any damage to the appliance or the cord.
-
If the supply cord is damaged, it must be replaced by the manufacturer or its service agent.
-
Keep USB cords away from hot surfaces.
-
Do not expose cells or batteries to heat or fire. Avoid storage in direct sunlight.
-
Only use this product on a stable and flat surface. Do not attempt to remove, replace or repair the battery from this product.
-
Do not dispose of batteries in a fire, they may explode.
-
Please dispose of batteries in accordance with local regulations.
-
Do not subject cells or batteries to mechanical shock.
-
Do not use any charger other than the charger specifically provided for use with the equipment.
-
Do not leave the product on charge when not in use.
This appliance is not intended for use by persons (including children) with
reduced physical, sensory or mental capabilities, or lack of experience and
knowledge, unless they have been given supervision or instruction concerning
use of the appliance by a person responsible for their safety. Children should
be supervised to ensure that they do not play with the appliance.
This appliance contains batteries that are non-replaceable.
WARNING: For the purposes of recharging the battery, only use the
detachable supply unit provided with this appliance.
Use only with ES050C-U050100XOS or JOD-S-050100AU-U-2 supply unit
Technical Information
- Model: 1211
- Rated voltage: 3.7 V
- Input voltage: 5V 0.5A
- Battery Type: 18350 Li ion
- Battery Capacity: 900 mAh
This product contains a battery which is permanently built into the product
for safety and performance reasons. The battery should not require replacement
during the lifetime of the product. It should only be removed by skilled
service personnel. Dispose of this product as electrical waste to ensure the
correct waste treatment of the battery.
Made in China.
Let us know what you think
We’d love to hear what you think of our colicsoothe air remover. Share your
photos, reviews and tell us about your experiences on our social
channels.
Any questions?
Visit our website: tommeetippee.com
Mayborn ANZ Pty Ltd., (ABN 66 154 703 134), PO Box 475, Mt Waverley , VIC
3149, AUSTRALIA
All IP rights held or used under licence by Mayborn (UK) Limited and/or its
affiliates. TOMMEE TIPPEE®, COLICSOOTHE™. Copyright © 2024.
Patent pending; WO2023/237895 see https://www.tommeetippee.com/en-
us/legals/patent.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>