Seeed Studio 102991714 Development Board Instruction Manual
- July 16, 2024
- seeed studio
Table of Contents
102991714 Development Board
Instruction Manual
Safety Instructions
reComputer
Item no: 3124642 (J202)
Operating Instructions for download
Use the link www.conrad.com/downloads (alternatively scan the QR code) to download the complete operating instructions (or new/current versions if available). Follow the instructions on the web page.
http://www.conrad.com/downloads
Intended use
The product is intended for indoor use only. Do not use it outdoors.
Contact with moisture must be avoided under all circumstances.
If you use the product for purposes other than those described, the product
may be damaged.
Improper use can result in short circuits, fires, electric shocks or other
hazards.
The product complies with the statutory national and European requirements.
For safety and approval purposes, you must not rebuild and/or modify the
product.
Read the safety instructions and any accompanying instructions carefully and
store them in a safe place. Make this product available to third parties only
together with the safety instructions and any accompanying instructions.
All company names and product names are trademarks of their respective owners.
All rights reserved.
Description of symbols
The following symbols are on the product/appliance or are used in the text:
The symbol warns of dangerous voltage that can lead to personal injury by
electric shock.
The symbol warns of hazards that can lead to personal injury.
Safety instructions
Read this document and the accompanying operating instructions carefully and especially observe the safety information. If you do not follow the safety instructions and information on proper handling, we assume no liability for any resulting personal injury or damage to property. Such cases will invalidate the warranty/guarantee.
4.1 General
■ The product is not a toy. Keep it out of the reach of children and pets.
■ Do not leave packaging material lying around carelessly. This may become
dangerous playing material for children.
■ If you have questions which remain unanswered by this information product,
contact our technical support service or other technical personnel.
■ Maintenance, modifications and repairs must only be completed by a
technician or an authorised repair centre.
4.2 Handling
■ Handle the product carefully. Jolts, impacts or a fall even from a low
height can damage the product.
4.3 Operating environment
■ Do not place the product under any mechanical stress.
■ Protect the appliance from extreme temperatures, strong jolts, flammable
gases, steam and solvents.
■ Protect the product from high humidity and moisture.
■ Protect the product from direct sunlight.
4.4 Operation
■ Consult an expert when in doubt about the operation, safety or connection of
the product.
■ If it is no longer possible to operate the product safely, take it out of
operation and protect it from any accidental use. DO NOT attempt to repair the
product yourself. Safe operation can no longer be guaranteed if the product:
- is visibly damaged,
- is no longer working properly,
- has been stored for extended periods in poor ambient conditions or
- has been subjected to any serious transport-related stresses.
4.5 Power adapter
Do not modify or repair mains supply components including mains plugs, mains cables, and power supplies. Do not use damaged components. Risk of death by electric shock!
■ Connect the appliance to a wall socket that can be accessed easily.
■ As power supply, only use the supplied mains adaptor.
■ Only connect the power adaptor to a normal mains socket connected to the
public sup- ply. Before plugging in the power adaptor, check whether the
voltage stated on the power adaptor complies with the voltage of your
electricity supplier.
■ Never connect or disconnect power adaptors if your hands are wet.
■ Never unplug the power adaptor from the mains socket by pulling on the
cable; always use the grips on the plug.
■ For safety reasons, disconnect the power adaptor from the mains socket
during storms.
■ Do not touch the power adapter if there are any signs of damage, as this may
cause a fatal electric shock! Take the following steps:
– Switch off the mains voltage to the socket containing the power adapter
(switch off the corresponding circuit breaker or remove the safety fuse, and
then switch off the corresponding RCD protective switch).
– Unplug the power adapter from the mains socket.
– Use a new power adapter of the same design. Do not use the damaged adapter
again.
■ Ensure that cables are not pinched, kinked or damaged by sharp edges.
■ Always lay cables so that nobody can trip over or become entangled in them.
This poses a risk of injury.
4.6 Connected devices
■ Also observe the safety and operating instructions of any other devices
which are connected to the product.
Disposal
This symbol must appear on any electrical and electronic equipment placed on
the EU market. This symbol indicates that this device should not be disposed
of as unsorted municipal waste at the end of its service life.
Owners of WEEE (Waste from Electrical and Electronic Equipment) shall dispose
of it separately from unsorted municipal waste. Spent batteries and
accumulators, which are not enclosed by the WEEE, as well as lamps that can be
removed from the WEEE in a non-destructive manner, must be removed by end
users from the WEEE in a non-destructive manner before it is handed over to a
collection point.
Distributors of electrical and electronic equipment are legally obliged to
provide free takeback of waste. Conrad provides the following return options
free of charge (more details on our website):
■ in our Conrad offices
■ at the Conrad collection points
■ at the collection points of public waste management authorities or the
collection points set up by manufacturers or distributors within the meaning
of the ElektroG
End users are responsible for deleting personal data from the WEEE to be
disposed of.
It should be noted that different obligations about the return or recycling of
WEEE may apply in countries outside of Germany.
Technical data
6.1 Power supply
Input ………………………………………. 9 – 19 V/DC
6.2 Power adapter
Input ………………………………………. 100 – 240 V/AC
Output …………………………………….. 12 V/DC, 5 A;Barrel Jack: 5.5 / 2.5 mm; Inside
(+)/Outside (-)
6.3 Environment
Usage environment …………………… Indoor
Operating temperature ……………… 0 to +60 °C
Operating humidity …………………… max. 95 % RH (non-condensing)
Storage temperature …………………. -40 to +85 °C
Storage humidity ………………………. <80 % RH (non-condensing)
6.4 Others
Dimensions (L x W) (approx.) …….. 100 x 80 mm
Weight (approx.) ………………………. 0.2 kg
This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240
Hirschau (www.conrad.com).
All rights including translation reserved. Reproduction by any method (e.g.
photocopying, microfilming or the capture in electronic data processing
systems) requires prior written approval from the editor. Reprinting, also in
part, is prohibited.
This publication reflects the technical status at the time of printing.
Copyright by Conrad Electronic SE.
*3124642 (J202)_V1_0624_jh_ss_en 1398667787-2 I1/O1 en
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>