Kenney 74983 Curtain Holdbacks Hook Installation Guide
- July 16, 2024
- Kenney
Table of Contents
Kenney 74983 Curtain Holdbacks Hook
Specifications
Component | Description |
---|---|
Drill | Tool used to create holes in the wall. |
J-arm | Bracket to be attached to the wall. |
Finial | Decorative piece attached to the J-arm. |
Screws | Used to secure the J-arm to the wall. |
Installation Instructions
-
Using a drill, create holes in the wall where you want to install the J-arm.
Diagram: A drill with a drill bit is shown. -
Attach the finial to the top of the J-arm.
Diagram: A J-arm with a finial being attached to the top. -
Secure the J-arm to the wall using screws.
Diagram: A J-arm being secured to the wall with screws. -
Ensure the finial is properly attached to the J-arm.
Diagram: The finial is shown properly attached to the J-arm.
For Over 100 Years
Kenney Manufacturing Company 1000 Jefferson Blvd. Warwick, RI 02886 USA www.kenney.com 1-800-753-6639
FAQ’s
What tools do I need for installation?
You will need a drill and screws.
How do I attach the finial to the J-arm?
Simply screw the finial onto the top of the J-arm.
How do I secure the J-arm to the wall?
Use screws to attach the J-arm to the wall after drilling the necessary holes.
Can I install the J-arm on any type of wall?
Yes, but ensure you use appropriate screws and anchors for your wall type.
Read User Manual Online (PDF format)
Loading......