Kenney KN80723REM Mission 3 or 4 Inch Decorative Bay Window Double Curtain Rod Instructions
- June 4, 2024
- Kenney
Table of Contents
Kenney KN80723REM Mission 3 or 4 Inch Decorative Bay Window Double
Curtain Rod
TOOLS REQUIRED
Instructions
Install Brackets
Position bracket at desired location above window. Mark screw locations. Drill and insert anchors as required. Use screws securing bracket to wall. Repeat for remaining brackets ensuring level installation.
Under 50″ Center
Center section installation under 50″ remove one outside tube from center section before assembly as shown above.
Assemble Rod Sets
Shirr drapery treatment onto rod. Assemble tubes by screwing on corner Connectors.
Hang Rod Sets
Loosen retention screws on each bracket. Set assembled rod sets into each bracket cup. Tighten retention screws. Tighten connector set screws.
Adjust Angle
Loosen each connector set screw allowing adjustment of angle of tubes.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>