JAMARA 033215 Q7 Standard At Reichelt Elektronik Instructions

: July 15, 2024
: JAMARA

Table of Contents

JAMARA 033215 Q7 Standard At Reichelt Elektronik
Product Usage Instructions
General information
Technical data:
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

JAMARA 033215 Q7 Standard At Reichelt Elektronik

Specifications

Product Name: Q7 Standard
Model Number: 033215
Manufacturer: JAMARA e.K.

Technical Data

Nominal Tension: 4.8V – 6.0V
Torque: 5.6 kg/cm (4.8V), 6.2 kg/cm (6.0V)
Gear Type: Ball bearing
Dimensions: 51mm x 40.5mm x 44.3mm
Weight: 48g

Product Usage Instructions

General Information
JAMARA e.K. is not liable for any damage caused to the product due to improper operation or handling errors. The customer is responsible for proper use and handling, including assembly, charging, and operation area selection. Refer to the operating and user instructions for important information and warnings.

Certificate of Conformity
JAMARA e.K. declares that the product “Q7 Standard, Nr. 033215” complies with Directive 2014/30/EU and 2011/65/EU. The full text of the EU Declaration of Conformity can be found at www.jamara-shop.com/Conformity.

Disposal Restrictions
Electrical appliances should not be disposed of in domestic waste. Remove batteries if possible and dispose of the equipment at communal collection points. Remove personal data stored on the appliance before disposal.

FAQ

Q: Can I use this product with a voltage higher than 6.0V?
A: It is recommended to only use the product within the specified voltage range of 4.8V to 6.0V to prevent damage.
Q: How should I dispose of the product?
A: Do not dispose of electrical appliances in domestic waste. Remove batteries and take the equipment to communal collection points for proper disposal.
Q: Where can I find customer service contact information?
A: You can contact JAMARA e.K. customer service at info@jamara.com or visit www.jamara.com for more information.

Instruction

General information

JAMARA e.K. is not liable for any damage caused to the product itself or through this, provided this is due to improper operation or handling errors. The Customer alone bears the full responsibility for the proper use and hand- ling, including without limitation, the assembly, the charging process, the use and choice of the operation area. Please refer to the operating and user instructions, it contains important information and warnings.

Certificate of Conformity
Hereby JAMARA e.K. declares that the product „Q7 Standard, Nr. 033215“ complies with Directive 2014/30/EU und 2011/65/EU.
The full text of the EU Declaration of Conformity is available at the following Internet address: www.jamara-shop.com/Conformity

Technical data:

Nominal tension 4,8V ~ 6,0 V
Torque (kg/cm) 5,6 kg/cm (4,8 V) 6,2 kg/cm (6,0 V)
Transit time (Sec./60°) 0,14 Sek. (4,8 V) 0,12 Sek. (6,0 V)
Gear Plastic
Ball bearing 2BB
Dimension is (mm) 51 x 40,5 x 44,3
Weight (g) 48 g

All rights reserved. Copyright JAMARA e.K. 2024
Copying or reproduction in whole or part, only with the expressed permission of JAMARA e.K.

Disposal restrictions
Electrical appliances must not be disposed of in domestic waste and must be disposed of separately. You are obliged to take out the batteries, if possible, and to dispose of the electrical equipment at the communal collection points. Should personal data be stored on the electrical appliance you must remove them by yourself.

Service centre

JAMARA e.K.
Am Lauerbühl 5 – DE-88317 Aichstetten