veratron MX 150 Oceanlink 7 Inch TFT Display Owner’s Manual
- July 18, 2024
- veratron
Table of Contents
PRODUCT BASIC INFORMATION
OCEANLINK
7” TFT DISPLAY
Best Performance in Outdoor Environments
ART. NR: A2C1865330001
OCEANLINK 7” TFT DISPLAY
Precision CAN Instrumentation for Leisure Boats
KEY FEATURES
- Transmissive layer technology for great readability even in direct sunlight
- Protection rating IPx7
- NMEA2000® certified
- 2 SAE J1939 inputs
- 13 analog inputs (6x resistive, 2x frequency, 2x 4-20mA, 3x 0-5V,
- 2 EasyLink data outputs
The OceanLink capacitive multi-touch TFT display is available in 7″ display
size. The full 24 bit / 16 mio. color optically bonded display features
transmissive layer technology for unprecedented and unsurpassed readability
even in direct sunlight. For simple installation in any yacht, up to 5
displays can be installed per NMEA2000.
OceanLink 7” TFT display has an embedded gateway for dual analogue engine
input and for dual SAEJ1939 engines. All the information received via
NMEA2000® and/or via SAE J1939 are redirected, using standard PGNs, to the
NMEA2000 network, so that any 3rd party devices, can show them as well. The
OceanLink 7” TFT can show data with 2 different layouts (digital and graphic)
in blue and amber color. The embedded light sensor can adjust the brightness
automatically so that the user could have the best visibility all day long (
night mode is only a customer selection).
All its analogue inputs are selectable from a clear list of possible sensors.
OceanLink 7” TFT using its smart software routine is able to load a predefined
curve calibration, just selecting either the sensor type or the sensor range
so that the customer is not obliged to calibrate them. Custom calibration
(when needed) is available for fluid level sensor and is also possible to
define damping and offset for navigation sensor (e.g., NavSensor, Wind Sensor,
etc.). The display also has an alarm input. This input canbe customized using
the Veratron Configurator Tool.
TECHNICAL DATA
| Housing | Case: Aluminum, Bezel: PC-FR |
|---|---|
| Start-Up Time | 5 sec / 3sec (warm start) |
| Display | 7”, full 24bit, TFT, touchscreen |
| Operating Temperature | Resolution: 800×480 |
| Storage Temperature | -25°C to 70°C |
| Operating Voltage | -40°C to 85°C |
| Current Consumption | 9 to 32 VDC |
| Protection Class | < 1A @ 12V |
| Flammability | IPx7 |
| EMC | UL-94V0 |
| Reverse Polarity | IEC 60945:2002 / ISO7637-2 |
| Protection | Yes (1minute) |
| Approval | CE, UKCA, RoHS, NMEA2000® |
| Data Input | CAN (NMEA2000,SAE J1939) |
Analog (Frequency, Resistive, Voltage,
Current 4-20mA, Alarm input)
Data Output| EasyLink, NMEA2000, Alarm output
CONNECTORS
Molex MX150 – Engine1 Connector
| Pin | Wire Color | Signal |
|---|---|---|
| 1 | Red | Power (12V/24V) |
| 2 | Black | Ground |
| 3 | White | Alarm output |
| 4 | Green | Frequency sensor input |
| 5 | Blue | SAE J1939 – CAN low |
| 6 | Blue/White | SAE J1939 – CAN high |
| 7 | Yellow | Ignition |
| 8 | Gray | Resistive sensor input |
| 9 | Brown | Resistive sensor input |
| 10 | Orange | 0-5V sensor input |
| 11 | Light Blue | 4-20mA sensor input |
| 12 | Yellow | 4-20mA sensor input |
Molex MX150 – Engine2 Connector
| Pin | Wire Color | Signal |
|---|---|---|
| 1 | Red | Alarm input (0-5V) |
| 2 | Black | Ground |
| 3 | White | Alarm output |
| 4 | Green | Frequency sensor input |
| 5 | Blue | SAE J1939 – CAN low |
| 6 | Blue/White | SAE J1939 – CAN high |
| 7 | Yellow | 0-5V sensor input |
| 8 | Gray | Resistive sensor input |
| 9 | Brown | Resistive sensor input |
| 10 | Orange | 0-5V sensor input |
| 11 | Light Blue | Resistive sensor input |
| 12 | Yellow | Resistive sensor input |
M12-5Pin
| Pin | Signal |
|---|---|
| 1 | Shield |
| 2 | Power (12V) |
| 3 | GND |
| 4 | CAN high |
| 5 | CAN low |
M12-4Pin
| Pin | Signal |
|---|---|
| 1 | Video Input 2 |
| 2 | Video Input 1 |
| 3 | GND |
| 4 | GND |
AMP Superseal
| Pin | Signal |
|---|---|
| 1 | EasyLink – Power |
| 2 | EasyLink – GND |
| 3 | EasyLink – Data |
ACCESSORIES
| Description | Part Number |
|---|---|
| Power and data cable – Engine 1 | A2C1507870001 |
| Data cable – Engine 2 | A2C1992110001 |
| EasyLink extension cable | A2C59500139 |
| Video input cable 0.3m | A2C1845710001 |
| Plastic frame – black | A2C1697530001 |
| Plastic frame – white | A2C1697540001 |
| Sun cover | A2C59501973 |
| NMEA 2000 power cable | A2C3931290001 |
| NMEA 2000 T-splitter | A2C3931270002 |
| NMEA 2000 drop cable – 0.5m | A2C9624370001 |
| NMEA 2000 drop cable – 2m | A2C9624380001 |
| NMEA 2000 drop cable – 6m | A2C9624400001 |
| NMEA 2000 terminator – Male | A2C3931100001 |
| NMEA 2000 terminator – Female | A2C3931060001 |
SCREENS
Plug-and-Play
Serial connection
OCEANLINK 52MM SATELLITES
- OceanLink look-and-feel
- Analog round instrument style
- Digital EasyLink interface
- Up to 2x 16 satellites on one 7” TFT
- Trim, Rudder, Voltmeter, Ammeter, Fuel-, Freshwater- and Wastewater level, Pyrometer, Gear and Engine Oil Pressure and Temperature, Coolant temperature, Boost
OUTDOOR INSTRUMENTATION ENGINEERED IN SWITZERLAND
Veratron AG / Industriestrasse 18 / 9464 Rüthi / Switzerland
T +41 71 7679 111 / info@veratron.com /
veratron.com
The information provided in this brochure contains only general descriptions
or performance characteristics, which do not always apply as described in case
of actual use or which may change as a result of further development of the
products. This information is
merely a technical description of the product. It is not meant or intended to
be a special guarantee for a particular quality or particular durability. An
obligation to provide the respective characteristics shall only exist if
expressly agreed in the terms of contract.
We reserve the right to make changes in availability as well as technical
changes without prior notice.
Veratron AG / English © 2024