lovio LVTF202Y24C Tower Fan Air Wave Pro User Manual

lovio LVTF202Y24C Tower Fan Air Wave Pro

Product Information

The Tower Fan AirWave PRO LVTF202Y24C is a column fan designed for indoor use. It features multiple speed settings, an oscillation function, timer, and ionization capability.

Specifications

• Protection Class: II

Product Usage Instructions

Preparation

1. Place the fan on a stable surface.
2. Ensure the power cable is securely connected to the fan.

Assembly

1. Attach the base to the main unit.
2. Insert the two protrusions of the upper part into both lower parts.
3. Secure the base by twisting it.
4. Mount the power cable holder by sliding it in.

Operation

All functions are controlled through the LED panel.

• Normal Mode: Default mode where the user sets the fan speed.
• Natural Mode: Fan cycles through low, medium, and high speeds.
• Night Mode: Fan adjusts speed automatically after a set time.
• Child Mode: Sets a timer for 3 hours on high speed, then switches to medium and low speeds.

Frequently Asked Questions

• Q: Can the oscillation function be turned off?
  • A: Yes, the oscillation function can be disabled by pressing the ‘OSC’ button.
• Q: How can I activate or deactivate the ionization function?
  • A: Press the ‘ION’ button on the remote control or hold the ‘MODE’ button for at least 3 seconds on the control panel to toggle the ionization function.

PLEASE READ THIS MANUAL CAREFULLY BEFORE THE FIRST USE AND KEEP IT FOR FUTURE REFERENCE. PERSONS WHO HAVE NOT READ THE MANUAL SHOULD NOT INSTALL, ADJUST OR OPERATE THE DEVICE.

DEVICE INFORMATION AND SAFETY GUIDELINES

Intended use

• This column fan is intended for domestic use only. It is not intended for heavy, commercial or industrial use and is not suitable for outdoor use.
• Warning! Do not use outdoors. Only use the device indoors and in accordance with the specified specifications. Improper use can be dangerous and lead to serious injuries.
• This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
• Always supervise children near the appliance. Make sure that children do not play with the device.
• Use this device only as described in the manual. Any other use is not recommended by the manufacturer and may cause fire, electric shock or injury.
• The manufacturer is not responsible for any damage caused by misuse or mishandling. Power cord and plug
• Do not replace the electric cord yourself. If the cord is damaged, it is forbidden to use the device.
• Do not cover the power cord with carpets, tablecloths, etc. Keep the cord away from sharp edges and hot surfaces.
• Do not twist or wrap the power cord around the device. Make sure that the power cord does not hang over the edge. This can lead to accidental pulling the cord and tipping over the fan, resulting in damage to the device or causing a health hazard to the user.
• Do not carry the device by the cord. Hold the handle to move it to another location. Always disconnect the device from the power supply before moving it.
• To disconnect the device, first turn it off with the button on the control panel, then pull the plug out of the wall socket. Never remove the plug from the socket by pulling the power cord. To disconnect, hold the rubber part of the plug.
• Do not touch the plug or cord with wet hands.
• Before connecting the device for the first time, check that the voltage indicated on the rating plate corresponds to your local mains voltage.
• Always unplug the device before cleaning and when not in use.
• Children must not clean and maintain the device.
• Never use the device if you notice any damage to the device or the power cord, after a breakdown, or after the device has been dropped or damaged in any other way.

Attention! Never put your fingers or any objects into the air inlet or outlet. In such a situation, there is a risk of personal injury due to electric shock and risk of damage to the device.

• Do not sit, stand or lean on the device. Do not place any objects on the device.
• The use of accessories not recommended by the manufacturer is not allowed.
• Do not leave the working device unattended.
• Do not use the device in a room where flammable gases or vapors are present. Do not store flammable liquids, paints, gas canisters and similar materials in the immediate vicinity of the device.
• In such a situation there is a risk of explosion or fire!
• Do not expose the device to rain, do not use it near swimming pools and water tanks, in the bathroom, laundry room or another damp place. Do not place vases or similar objects filled with liquids near the device.
• Repairs to electrical devices may only be performed by qualified service technicians. Improper repairs can result in significant risk to the user.
• Install the device in a safe place to minimize the risk of accidentally tipping it over or tripping over the power cord.
• Do not cover the air inlet and outlet, do not use the device near curtains, drapes, blankets, etc. Ensure free air circulation around the device.
• Always keep the air inlet and outlet grilles clean and free of dust, hair and pet hair.
• Keep all objects at least 1 meter away from the front and back of the device.
• Never attempt to disassemble the casing of the device. Repairs that require opening the device or access to internal parts should be performed by a qualified service. There are no user-serviceable parts in the device.
• Before moving the device, turn it off using the main switch and then disconnect it from the power source.
• Use this device only as described in the manual.
• Do not connect the device to any external control devices.
• The device should always be operated in an upright position and placed on a flat surface.
• Warning! Do not cover! Do not cover the airflow of the intake or exhaust grilles in any way.

BEFORE THE OPERATION

• After unpacking the device, check its condition. Do not use the device in poor technical condition.
• You must report any damage found.
• Keep packaging materials such as foils and staples out of the reach of children. Dispose of the packaging components in accordance with local regulations and taking into account the environmental impact.
• For your convenience, record the date of purchase on the “Warranty” page of this manual and attach your proof of purchase. Retain this information in case warranty service is required.
• It is recommended to leave the box for storage out of season. Choose a suitable location for the device.
• Follow local safety regulations.
• Straighten the power cord before starting. Working with a coiled cord may cause overheating and a risk of fire.
• The use of an extension cord with this device is not recommended.
• Do not connect the device to the mains until it is fully assembled (base) and stable. Connect the plug to an appropriate wall socket with the parameters corresponding to the data on the rating plate of the device.

CONSTRUCTION OF THE DEVICE

ASSEMBLY

Follow the steps below to assemble the fan

1. Take the two parts of the base out of the package.
2. Align both central parts of the base and set them at a slight angle to match the protrusions of both parts, then turn in the opposite direction and align so that the protrusions lock and the halves form a single unit.
3. Pass the fan cable through the hole in the base, then attach the base to the fan body with the four screws included in the set and turn them clockwise
4. Attach the cable holder included in the set along with the manual by inserting it into the holes in the back of the housing, just below the holder – according to the attached drawing:
5. Place the fan on the attached base, on a flat and stable surface.

OPERATION

The fan can be operated with a remote control or a touch control panel. The remote control is powered by a CR2025 – 3V battery, included in the set. All functions operated by the remote control and the control panel work identically.

Connect the cord to an electrical outlet with a voltage according to the nameplate. Turn on the fan using the on/off button, then the current room temperature will be indicated on the LED display.

Function buttons:

• ON OFF – this button is used to turn the device on/off
• FAN SPEED: Use this button to select your desired fan speed from LOW-MED-HIGH. The selected SPEED speed will be displayed on the LED panel.
• SELECTION OF OPERATING MODE. Using this button, it is possible to select one of the operating MODE modes of the device in the following range: NORMAL – NATURAL – NIGHT MODE – CHILD MODE
• NORMAL Mode: This is the default mode of the device. The device works at the speed set by the user.
• NATURAL mode. The fan will start working according to he schemes low speed (5 sec) -›medium speed (5 sec) – high speed (5 sec) -›medium speed (5 sec) →…
• NIGHT mode:
  1. If you set the fan speed to high, it will run at this setting for 30 minutes, then the fan will go to medium speed for another 30 minutes, then it will go to low speed until you turn it off.
  2. If the fan is set to medium speed, the fan will run at this setting for 30 minutes, after which the fan will go to low speed until it is turned off.
  3. If the fan speed is set to low, the units will run in low speed until shut down.

The device display will go blank after 30 seconds. The display will turn on after pressing any key.

• CHILD mode: the fan will automatically set the timer for 3 hours and the oscillation function will start. The fan will start at the highest speed and after 15 minutes it will go to the medium speed mode and then after 15 minutes to the low speed mode and will remain in this mode until it is turned off.

The oscillation function can be turned off at any time.

The device display will go blank after 30 seconds. The display will turn on after pressing any key.

• TIMER: allows you to set the duration of the device’s working time cycle in the range of 1-12 hours.
• OSCILLATION: by pressing this ‘OSC’ button, the device will start to oscillate (moving in a plane from right to left)
• The DISPLAY can be turned off temporarily using the LED button on the remote control or by pressing and holding for min. 3 seconds of the SPEED button on the touch panel. The display will DISPLAY turn back on when any button is pressed
• IONIZATION. Pressing the “ION” button on the remote control or by pressing the “MODE” button on the control panel for at least 3 seconds. will start or stop the ionization function. The ‘ION’ icon will light up on the display

CLEANING AND MAINTENANCE

ALWAYS TURN OFF THE DEVICE AND DISCONNECT IT FROM THE POWER SUPPLY BEFORE STARTING CLEANING! AFTER SWITCHING OFF, WAIT UNTIL THE FAN COMPLETELY STOPS.

• Use a soft cloth to remove dust from the surface of the device.
• Regularly clean the air inlet and outlet with a vacuum cleaner.
• To clean dirt, use a soft, damp (not wet) cloth dampened with water and a mild detergent
• Do not use gasoline or solvents to clean the fan.
• Make sure that water does not drip onto the device and does not enter the housing.
• Make sure that the motor and electrical components do not come into contact with water.
• Do not leave a drop of water on the display and control panel.
• Use a dry cloth to dry the device thoroughly before restarting.
• Children must not clean and maintain the device.
• Do not attempt to tamper with the device yourself. Be careful when cleaning the motor housing.
• When the device will not be used for a long time, store it in a dry and well-ventilated place.
• For convenient storage, use the original box.

TECHNICAL DATA

• Product name: LVTF202Y24C
• Rated voltage: 220-240 V~
• Rated power: 45 W
• Frequency: 50-60 Hz
• Nett weight: 3,65 kg
• Gross weight: 4,41 kg
• Product dimensions: ∅315*1170 mm
• Package dimensions: 1191186169 mm
• Class: II

UTILIZATION

After use, the device must not be disposed of with other municipal waste. We pay particular attention to the key role of the consumer in the recycling of this type of waste. The device must be disposed of at a waste disposal center. Sorting of waste such as old electrical equipment and electronic prevents negative consequences for the environment and human health, which may result from inappropriate disposal of such waste. Sorting such waste allows the materials from which these devices are made to be recovered, resulting in significant energy and resource savings. Such disposal requirements are marked with the label of the crossed waste container placed on the device.

Connect the TUYA APP

1. Install the TUYA app on your smartphone and create a user account. Set a login password and log in to the app.
2. Make sure you have a good WiFi range and are connected to the network you want to connect the device to.
3. Plug the device into a power socket and press the power button to turn the device on.
4. The Wi-Fi icon will start flashing on the device, indicating that the device has entered pairing mode.
5. On the main tab of the Tuya app, select ‘Add device’. Your device should automatically connect to the app, just follow the instructions.
6. The app will attempt to connect to your device and this process may take a few minutes.
7. Once the app is connected, the device control panel is available on the Home tab of the app.
8. When the operation is successful, the Wi-Fi icon will light up permanently, no longer flashing.

• tel: +48 22 123 96 60
• lub e-mail: serwis@manta.com.pl

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>