Masderm RF Body Device User Guide

Masderm RF Body Device

Product Information

Specifications

• Device Name: RF Body Device
• Functions: EMS, Slimming, Radiofrequency, Combined Slimming + RF
• Power Source: Rechargeable Battery
• Charging Time: Approximately 3 hours
• Charging Cable: USB A to USB C

Product Usage Instructions

• Before first use, charge the device for at least 6 hours. Do not use the device while it is charging.
• To start the device, press the ON/OFF button for about 2 seconds. The LED light will turn green, indicating the function and vibration activation. To switch it off, press the ON/OFF button for about 2 seconds.
• The device has multiple functions indicated by different LED lights. Press the corresponding button to switch between functions.
• You can adjust the power level using the power regulator on the device. Select the appropriate power level based on your preference and comfort.
• Hold the device by the top, place the electrodes on the skin, and massage according to the recommended techniques for each function.

FAQ

• When and how long can I use the device?
• The recommended duration and frequency of use may vary depending on the function being used. Refer to the user manual for specific guidelines on usage.
• What are the contraindications for using the device?
• Refer to the contraindications section in the user manual to understand situations where the device should not be used.
• How should I maintain the device?
• Follow the maintenance instructions provided in the user manual to ensure the longevity and optimal performance of the RF Body Device.

INTRODUCTION

• The entire Masderm team welcomes you and thanks you for the trust you have placed in our Body Device to help you improve the appearance of sagging and cellulite on your body’s skin.
• Please, before using the device, read these instructions carefully and make sure that you follow all the steps correctly.

DEVICE FUNCTIONALITY

Our RF BODY DEVICE Device (Body Radio Frequency Device) has the main objective of improving body sagging, reducing cellulite and excess fat in certain areas of the body and improving the appearance of the skin.
The RF BODY DEVICE is a multifunction device that combines different forms of energy:

• Radio Frequency (RF) Currents
• LED light of different colors (purple, blue, red and green)
• Stimulation currents (EMS)
• High-frequency mechanical vibration

Note: The device applies very low voltage voltages (approximately 15V) which generates imperceptible currents that do not cause any discomfort to the user. In some functions, you may feel a slight sensation of heat.

PARTS OF THE DEVICE

PACKAGING CONTENT

When you open the packaging box you will have found the following:

• The RF BODY DEVICE device
• This instruction manual
• A cleaning wipe
• A USB cable for charging the device with USB A connector on one end and USB C on the other

HOW TO CHARGE THE DEVICE

• The RF BODY DEVICE device works with a rechargeable battery. To charge the
  device you must have a USB charger (like the one for mobile phones) with a USB A output of at least 1 amp.

• Connect the USB C end of the charging cable to the RF BODY DEVICE and the USB A end to the charger and connect it to the mains. You will see a flashing light on the device indicating that it is charging. This device takes about 3 hours to charge. When it stops flashing, the device is fully charged. Disconnect the charging cable and you can start using it.

• Before using the device for the first time, charge it for at least 6 hours.

IMPORTANT: The device should not be used during the charging process

HOW TO SWITCH IT ON AND OFF

• To start the device, press the ON/OFF button for about 2 seconds. You will hear a sound and the LED light will turn green, the function indicator indicates EMS and the vibration is activated.
• Whichever function you are in, you can turn off the device by holding down the ON/OFF button for about 2 seconds. You will hear a sound, the vibration will stop and the LED light will turn off, as well as the screen indicating the functions.

HOW TO CHANGE FUNCTION

The RF BODY DEVICE device has four functions: EMS, SLIM, RF and SLIM+RF. When you start the device it will enter the EMS function. You can change functions by pressing and holding the ON/OFF button for a short time (approximately 1 second) moving from one function to the next in a rotating manner. On the function indicator screen you will see the function currently selected. You will also see that the LED function is always active because in each function the LED light is always on, the only thing that changes is its color.

HOW TO MODIFY THE POWER

The RF BODY DEVICE device can operate with four power levels of RF, EMS and VIBRATION. When you start the device, it starts with the lowest level. By repeatedly pressing the POWER REGULATOR button you will rotate the power.
The power levels are indicated on the screen by four light lines of different lengths:

• LEVEL 1: One line.
• LEVEL 2: Two lines.
• LEVEL 3: Three lines.
• LEVEL 4: Four lines.

HOW TO HANDLE THE DEVICE

• Hold the device by the top, place the electrodes on the skin and massage as indicated in each of the functions.

DEVICE FUNCTIONS AND HOW TO USE IT

The RF Face Device has 4 main functions:

1. EMS (STIMULATION, Fitness Mode). Green LED light
2. SLIM (SLIMMING). Blue LED light
3. RF (RADIOFREQUENCY). Red light
4. SLIM + RF (COMBINED). Lilac LED light

HOW TO USE THE EMS (STIMULATION) FUNCTION. FITNESS MODE – GREEN LIGHT
The stimulation currents exercise muscle movement to promote greater tension in the skin.
Green light improves the oxygen utilization function of cells, facilitates the microcirculation effect of the body surface, promoting a better and smoother appearance of the skin. With this function you will notice the skin on your body is firmer and less flaccid.
To use this function it is very easy:

• Make sure your skin is clean and dry.
• Apply the appropriate cream for what you need to treat. In this case and with this function that you want to improve firmness and muscles, we recommend our body firming and conductive cream RF Body Firming (we remind you that this cream can be used with or without the device)
• Now you can apply the device (remember never the other way around, since if you pour product directly on the device it may be damaged).
• Start the device and you are already in the EMS function. We recommend that you always start with the lowest power level and work your way up depending on your needs and skin type.
• Apply the device to your body and you will notice the vibrations and certain intermittent flashes.
• The movement depends on the area of the body where you apply it:
  • Arm area is zig-zag shaped.
  • Leg area from bottom to top.
  • Buttocks and hips area in a circular shape and from bottom to top.
  • Zig-zag abdominal area.
  • Zig-zag back area.
• Once this function is finished, if you have traces of cream, just massage the area manually so as not to waste the product.

HOW TO USE THE SLIM FUNCTION (SLIMMING) – BLUE LIGHT

With this function, the device’s mid-frequency current stimulation is used to promote the absorption of the cream into the skin and burn body fat. Blue light can promote collagen synthesis, revitalize skin by burning fat, and tighten sagging skin. With this function you will notice the skin on your body is smoother and has less volume.
To use this function it is very easy:

• Make sure your skin is clean and dry.
• Apply the right cream for what you need. Apply the right cream for what you need to treat. In this case and with this function if you want to improve the appearance of skin with cellulite and accumulated fat, the ideal cream is our Body Slim anti-cellulite cream, which is also conductive (we remind you that this cream can be used with or without the device).
• Now you can apply the device (remember never the other way around, since if you pour product directly on the device it may be damaged).
• Start the device and select the SLIM function. We recommend that you always start with the lowest power level and work your way up depending on your needs and skin type.
• The movement depends on the area of the body where you apply it:
  • Arm area is zig-zag shaped.
  • Leg area from bottom to top.
  • Buttocks and hips area in a circular shape and from bottom to top.
  • Zig-zag abdominal area.
  • Zig-zag back area.
• Once this function is finished, if you have traces of cream, just massage the area manually so as not to waste product.

HOW TO USE THE RF (RADIO FREQUENCY) FUNCTION – RED LIGHT

Radiofrequency is a technology that helps firm the skin and soften the area by promoting blood circulation in the body, thus improving its firmness and elasticity. Red light can penetrate deeper into the bottom layer of the skin, reactivating collagen and even improving the overall appearance of the skin. With this function you will notice firmer body skin.
To use this function it is very easy:

• Make sure your skin is clean and dry.
• Apply the appropriate cream for what you need to treat. In this case and with this function that you want to improve the firmness of your body’s skin to make it feel less flaccid, we recommend our RF Body Firming body firming and conductive cream (we remind you that this cream can be used with or without the device)
• Now you can apply the device (remember never the other way around, since if you pour product directly on the device it may be damaged).
• Start the device and select the RF function. We recommend that you always start with the lowest power level and go up depending on your needs and your skin type.
• The movement depends on the area of the body where you apply it:
  • Arm area is zig-zag shaped.
  • Leg area from bottom to top.
  • Buttocks and hips area in a circular shape and from bottom to top.
  • Zig-zag abdominal area.
  • Zig-zag back area.
• Once this function is finished, if you have traces of cream, just massage the area manually so as not to waste product.

HOW TO USE THE COMBINED SLIM + RF FUNCTION (COMBINED BODY SLIMMING AND RADIO FREQUENCY) – VIOLET LIGHT

This feature uses the device’s mid-frequency current stimulation, combined with RF and SLIM radio frequency technology, allowing you to burn body fat while promoting skin circulation for firmer, smoother, and reduced-looking skin. . Lilac light has a double frequency of red light and blue light and adds their properties. With this function you will notice your skin firmer, softer and with less volume.

• Make sure your skin is clean and dry.

• Apply the appropriate cream for what you need to treat. In this case and with this function that you want to improve the firmness, softness and cellulite of your body’s skin.
  We recommend the combination of our RF Body Firming body firming and conductive cream (we remind you that this cream can be used with or without the device) and our Body Slim anti-cellulite cream, which is also conductive (we remind you that this cream can be used with or without the device). device).
  The way to apply it will depend on what you want to treat in each area (for example, Body Firming in the abdomen area and Body Slim in the buttocks area).

• Now you can apply the device (remember never the other way around, since if you pour product directly on the device it may be damaged).

• Start the device and select the RF function. We recommend that you always start with the lowest power level and go up depending on your needs and your skin type.

• The movement depends on the area of the body where you apply it:

  • Arm area is zig-zag shaped.
  • Leg area from bottom to top.
  • Buttocks and hips area in a circular shape and from bottom to top.
  • Zig-zag abdominal area.
  • Zig-zag back area.

• Once this function is finished, if you have traces of cream, just massage the area manually so as not to waste product.

WHEN AND HOW LONG CAN I USE THE DEVICE?
You can use the RF BODY DEVICE device at night 3 times a week on alternate days and for no more than 10 minutes in the same area, with a maximum of 30 minutes on the day of treatment, but in 3 different areas of the body (10 minutes x 3 different areas).
Please respect these instructions, as they are recommendations for this type of device and validated by skin care experts.

If you want to use several functions on the same day of the treatment, you can combine them as long as you do not exceed 10 minutes in the same area (with a maximum 30 minutes, but in 3 different zones at 10 minutes per zone). However, we recommend using the same function in the same week and alternating the different functions for weeks.
Below, we explain a practical example to serve as a guide:

• WEEK 1: Monday, Wednesday and Friday: I apply the EMS functions
• WEEK 2: Monday, Wednesday and Friday: I apply the RF functions
• WEEK 3: Monday, Wednesday and Friday: I apply the RF+SLIM function

Additionally, once a week on the day of the treatment, we recommend performing a body exfoliation and then applying the device with the corresponding cream.
We recommend that you do the treatment at night, since the sun cannot touch you.
You can apply this device all year round, although we recommend that you let your skin rest about 3 times a year (about 15 days), which may coincide with Christmas holidays, Easter holidays and summer holidays.
In the event that you have several Masderm devices and want to know the order of application of each one and the appropriate cream, we recommend that you contact us at our Customer Service email hello@masderm.com and we will be happy to help you. personalized advice.

APPLICATION TIPS

1. Arm area is zig-zag shaped.
2. Leg area from bottom to top.
3. Buttocks and hips area in a circular shape and from bottom to top.
4. Abdomen area in a zig-zag shape.
5. Back area in zig-zag shape.

Apply the appropriate cream for what you need to treat. If you want to improve firmness, we recommend our RF Body Firming conductive body cream (we remind you that this cream can be used with or without the device). If what you want is to improve the appearance of skin with cellulite and accumulated fat, the ideal cream is our Body Slim which is also conductive (we remind you that this cream can be used with or without the device). And finally, if what you want is to treat tired/swollen legs you should use our specific Legmas Cold Gel. (we remind you that this gel can be used with or without the device).
The device is completely safe but may cause a sensation of microcurrents if your skin is sensitive or in some specific areas, since it is a powerful device. A period of adaptation is common until you get used to the sensation. In any case, if you notice this type of microcurrent, we recommend that you always use the function that you do not notice this sensation and at the minimum power until your skin gets used to it. We also recommend Apply the cream and wait 2 minutes before performing the treatment. If you still continue to notice it, you can contact us at hello@masderm.com and we will be happy to assist you.

CONTRAINDICATIONS

Its use is strictly prohibited: pregnant and lactating women, during painful periods of menstruation it is not recommended (you may be more sensitive), children (under 14 years of age), patients with illnesses in serious condition or classified as serious, patients with epilepsy, patients with severe or flare-up dermatitis (ask before), patients allergic to metals or others related to the treatment such as creams, patients with telangiectasia, patients with coagulation problems, patients with cardiac pacemakers, metal implants in the body, people with hearing aids and those with insulin auto- injectors. In autoimmune pathologies, ask the specialist who treats the case (rheumatoid arthritis, lupus, sclerosis…).
It is also not suitable to use on the face, head and heart area.
We recommend that you visit the website to consult the updated information and if you have any questions, you can contact us at hello@masderm.com and we will be happy to assist you.

PRECAUTIONS AND MAINTENANCE

1. When the device is used for the first time, it is recommended to get used to it slowly from the lowest power level and gradually increase the level.
2. Remember that you cannot use the device while it is charging.
3. Before and after use, clean the electrode head of any cream residue, as this could cause deterioration of the device.
4. Do not place the device in a high-temperature environment or humid place such as a bathroom.
5. Avoid drops and strong impacts as they may damage the device.
6. Before cleaning the device, first make sure it is turned off.
7. Please do not wash the device with water; you can use a damp paper towel or a soft cloth moistened with a little soapy liquid to clean it.
8. Do not use corrosive solutions (alcohol, banana oil, gasoline, nail polish remover, etc.) to clean the device or its accessories, as this may cause them to be damaged.
9. Please keep the device in its box with all the accessories since, in the event of an incident with the device, we cannot guarantee that we will be responsible for it if all the equipment is not complete.
10. In case of device failure or abnormal reaction, please contact us at hello@masderm.com.

TECHNICAL INFORMATION

• What does the vibration of the device encourage?
• It helps the skin become tighter, thus increasing its elasticity and the skin’s metabolism by adopting mechanical vibration and voltage stimulation methods.
• What does LED light benefit?
• Increase elasticity and tighten the skin.
• What makes the device feel warm?
• Heat favors better penetration of the cream and stimulation of collagen.

TECHNICAL CHARACTERISTICS OF THE DEVICE

• Product Name: RF Body Device
• Product Model: ES-1201
• Charging Voltage: 5V 1A
• Nominal Power: 2.5W
• Charging time: 3 hours
• Standard Compliance: GB 4706.1-2005 GB4706.15-2008
• Duration of Operation: The device turns itself off automatically after 10 minutes.

Masderm is not responsible for possible collateral damage in the use or maintenance of the device if the instructions in these instructions have not been correctly followed.
These instructions are subject to change for better customer understanding.

References

• Masderm | Nº1 en Radiofrecuencia en Casa – Masderm Cosmética

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>