GOALZERO Haven 10 Home Integration User Guide
- July 15, 2024
- GOALZERO
Table of Contents
GOALZERO Haven 10 Home Integration
Specifications
- Product Name: Haven 10 Home Integration Kit
- Model Number: #70050
- Main Components: Yeti PRO 4000, Haven 10 Transfer Switch
- Power Compatibility: 120 V circuits
- Installation Requirement: Must be installed by a qualified and licensed electrician
Product Information
The Haven 10 Home Integration Kit includes the Haven 10 transfer switch designed to back up 10 essential circuits during a power outage when used with the Yeti PRO 4000 power station and optional Tank PRO 4000 Expansion Battery.
Installation Instructions
1. Getting Started
Before installation, identify the circuits you want to keep powered such as refrigerator, wifi router outlet, kitchen/bedroom outlets, garage door opener/sump pump.
2. Connecting the Yeti Power Station
After professional installation of Haven 10, connect the Yeti PRO 4000 to the transfer switch using the Yeti Extension Cable.
3. Keeping the Yeti Charged
Keep the Yeti Power Station plugged into an AC wall outlet to maintain a continuous 100% charge.
4. Using Backup Power During an Outage
- Press the Power Button on the Yeti to turn it on.
- In the Haven 10 switch box, flip switches from LINE to YETI to activate backup power.
5. Going Back to the Grid
- When grid power is restored, switch back the switches on the transfer switch from YETI to LINE.
- Turn off the Yeti Power Station by pressing the AC button.
KEEP YOUR LIFE RUNNING WITH BACK UP POWER
The Haven 10 is a convenient manual transfer switch that lets you backup 10 essential circuits during a power outage. Use it with your Yeti PRO 4000 to keep lights on, fridges cooling, and personal devices charged. All without moving your power station
PRODUCT INFORMATION
GENERAL
- 10 Circuits: 4-20A, 6-15A
- Built-in Protection: one per circuit
- Max Wattage: 7500W
- Max circuit breaker: 2x 30A and 8x 20A
- Requires Goal Zero Yeti PRO 4000 power station and optional Tank PRO 4000 Expansion Battery.
WHAT’S INCLUDED
-
Yeti Extension Cable: 5 ft, 10AWG
Note: This cable can only be used to connect one Yeti PRO 4000 -
Haven 10 Manual Transfer Switch
(Reliance PRO/TRAN 2®) -
3600 W Passthrough Cable
(More info in the back of this booklet)
INSTALLED
MUST BE INSTALLED BY A QUALIFIED AND LICENSED ELECTRICIAN.
GETTING STARTED
With your new Haven 10 and Yeti PRO 4000, you have the ability to wire up ten, 120 V* circuits in your home. So when the power goes out you can keep your most prized electrical components running. You’ll want to know which circuits you’d like to keep powered on before your Licensed Electrician comes to install the Haven 10.
Common circuits to keep powered
These circuits run on 120 V or less, *Air conditioners and electric dryers/ovens are 240 V.
CONNECTING THE YETI POWER STATION TO THE TRANSFER SWITCH
After the Haven 10 has been professionally installed, you can connect the Yeti to the front of the transfer switch with the Yeti Extension Cable.
KEEP THE YETI CHARGED
If possible, keep the Yeti Power Station plugged into the wall outlet at all times to ensure a continuous 100% charge.
USING YOUR BACKUP POWER DURING AN OUTAGE
Just when you think “Oh No!” when the power goes out, you’re quickly calmed knowing that you’ve already installed your back-up power system and you’re good to go.
- Press the Power Button on the Yeti Power Station.
- The button will glow white when the power is on.
- Lift the cover of the Haven 10 and flip your switches from LINE to YETI. All Done!
GOING BACK TO THE GRID
- Once your grid or LINE power has been restored, simply return the Switches back to LINE on the transfer switch
- Then turn off the Yeti power stations by pushing the AC button. The light will turn off. All Done
- There is no need to disconnect the Yeti from the Haven 10 when not in use.
FAQs
- Q: What Yeti Portable Power Station do you recommend to use with the Haven 10?
- A: The Haven 10 is only compatible with the Yeti PRO 4000 power station and Tank PRO 4000 Expansion Battery.
- Q: How long will the Haven 10 system run my fridge?
- A: Just like estimating runtimes from the Yetis themselves, runtimes with the Haven 10 system are dependent on what you’re powering (lights vs. fridge) and what Yeti Portable Power Station you’re using. The amount of power a fridge pulls is completely dependent on the make and model, as well as other factors, like how often you are opening and closing it, and how full it is. For example, a fridge pulling an average of 55 watts would run for approximately 72 hours from a Yeti PRO 4000 (4000Wh/55=72.72. For more information on runtimes and other examples, check out the user manual for the Goal Zero Yeti Portable Power Station.
- Q: What if I want to take the Yeti PRO 4000 outside?
- A: Easy, simply unplug the Yeti and take it wherever you need it.
3600 W Passthrough Cable
8 ft Flying Leads to Power + Male Cable
This cable replaces the power cord that is included with the Yeti PRO. Please keep the power cord in case you need it in the future.
- The cable allows for automatic power switching in less than 10 milliseconds (up to 3600 W). When grid power goes down, the circuits connected to the Haven 10 will switch to using power from the Yeti PRO. To take advantage of this feature, make sure the Yeti PRO 4000 is connected to the Haven 10 Manual Transfer Switch and that the circuits are set to “YETI”.
- It allows you to charge the Yeti PRO 4000 while simultaneously passing through power to your circuits.
- Passthrough capability up to 3600 W when the Yeti PRO is completely charged. (120 V only)
- If charging at 1800 W, it can continue to pass through another 1800 W
When using the Yeti PRO 4000 with the Haven:
Automatic Power Switching and Passthrough functionalities are not available if a GFCI-protected circuit is supplying power to the Yeti PRO 4000. Before installing, have your electrician confirm the power supplied to the Yeti PRO 4000 is not from a GFCI protected circuit. This applies whether the Yeti PRO 4000 is directly plugged into the GFCI receptacle or to another receptacle on the same circuit. GFCI rules differ by area. Check with your local electrician or city for the latest information
NEED ASSISTANCE?
NOTES
If you need additional assistance setting up or using your Haven 10 and Yeti PRO 4000, visit our contact page at www.goalzero.com/contact or call 1-888-794-6250. Circuit Breaker Labels from left to right: