Teslar 3/Y 9.6 Inch Display Upgrade Instructions
- July 15, 2024
- Teslar
Table of Contents
Teslar 3/Y 9.6 Inch Display Upgrade
Display Upgrade
V3 New Version Software Optimization – 20240125
This update primarily focuses on optimizing the following features:
- Enhance software smoothness.
- Add lane-turning animation display.
- Add charging animations.
- Add multiple languages, such as Spanish and German.
Things to note before upgrading
- The SD card memory for the upgrade must be 8GB/16GB (Make sure the memory is not greater than 16GB).
Upgrade Steps
Step 1: Prepare a SD card (8gb / 16gb), and format the SD card to FAT 32
Step 2: Download the upgrade folder (filename: Upgrade Software File) to your computer and unzip it.
Step 3: First upgrade the APP
Open the file (filename: APP), then copy the entire ‘update’ folder to the SD
card (Remember not to change the file name, otherwise the upgrade will not be
successful).
Insert the USB drive into the screen, and the screen will automatically start the upgrade process. After the upgrade is complete, it will automatically restart. Then, remove the SD card. If it cannot restart automatically, please press and hold the left button of the steering wheel for 5 seconds or reconnect the plug.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>