JBL Live 3 Wireless Earbuds User Guide

JBL Live 3 Wireless Earbuds

Product Information
Specifications

• Model (Earbud): LIVE BUDS 3
• Impedance: 16 ohm
• Sensitivity: 106 dB SPL@1 kHz
• Driver size: 10 mm/0.39 Dynamic Driver
• Maximum SPL: 96 dBA (EN50332)
• Power supply: 5V 1A
• Microphone sensitivity: -38 dBV/Pa@1 kHz
• Bluetooth version (Earbud): 5.3
• Bluetooth version (Charging case): 5.1
• Charging case battery type: Lithium-ion battery (620 mAh/3.8 V)
• Bluetooth profile version: A2DP V1.4, AVRCP V1.6.2, HFP V1.8
• Earbud battery type: Lithium-ion battery (60 mAh/3.85 V)
• Charging time: 2 hrs from empty
• Bluetooth transmitter frequency range: 2.4 GHz – 2.4835 GHz

Power On & Connect

1. Ensure Bluetooth is enabled on your device.
2. Select JBL Live Buds 3 from the list of available devices.
3. Follow any additional pairing instructions on your device.

Frequently Asked Questions (FAQ)
Q: How do I charge the Live Buds?
A: You can charge the Live Buds through a Qi-certified wireless charging pad (not included).

QUICK START GUIDE

WHAT’S IN THE BOX

APPA

HOW TO WEAR

FIRST TIME USE

POWER ON & CONNECT

DUAL CONNECT + SYNC

MULTI-POINT CONNECTION

CONTROLS

AUTO PLAY/PAUSE

VOICEAWARE

POWER OFF

MANUAL SETUP

SMART CHARGING CASETM SETTINGS

DO MORE WITH THE APP

CHARGING

LED BEHAVIORS

TECH SPEC

ISED RF Exposure Information and Statement

This equipment complies with ISED radiation exposure limits set forth for an uncontrolled environment. End user must follow the specific operating instructions for satisfying RF exposure compliance. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
The SAR limit of Canada is 1.6 W/kg averaged over one gram of tissue. Device types: (IC: 6132A-LIVEBUDS3) has also been tested against this SAR limit According to this standard, the highest SAR value reported during product certification for use when properly worn on the body is 0.17 W/Kg.
Device types: (IC: 6132A-LIVEBUDS3C) has also been tested against this SAR limit According to this standard, the highest SAR value reported during product certification for use when properly worn on the body is 0.04 W/Kg.

Head operation
The device was subjected to a typical head manipulation test. In order to comply with RF exposure requirements, a minimum separation distance of 0 cm must be maintained between the user’s ear and the product (including the antenna). Head exposure that do not meet these requirements may not meet RF exposure requirements and should be avoided. Use only the supplied or approved antenna.
IC: 6132A-LIVEBUDS3

Body operation
The device was tested for typical bodily operations where the product was kept with 5mm distance attaching away from the body. Non-compliance with the above restrictions may result in violation of IC RF exposure guidelines. Use only the supplied or approved antenna.

IC: 6132A-LIVEBUDS3C

WARNING

DO NOT ATTEMPT TO OPEN, SERVICE, OR DISASSEMBLE THE BATTERY | DO NOT SHORT CIRCUIT | MAY EXPLODE IF DISPOSED OF IN FIRE | RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE | DISPOSE OR RECYCLE USED BATTERIES ACCORDING TO THE INSTRUCTIONS

The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by HARMAN International Industries, Incorporated is under license. Other trademarks and trade names are those of their respective owners.
Google, Android and Google Play are trademarks of Google LLC.

 www.anatel.gov.br

MIIT ID: 24J998309550 CMIIT ID: 24J998309550
CMIIT ID: 24J998300230CMIIT ID: 24J998300230
Harman InHarman Intternaernational Industriestional Industries, Inc, Incorporporated

Product specifications and app screens are subject to change without notice. HP_JBL_LIVE BUDS 3_Global_QSG_SOP_V8

References

• Anatel — Agência Nacional de Telecomunicações

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>