Allavino VSBC24L Built In Beverage Center Instruction Manual

Allavino VSBC24L Built In Beverage Center

Specifications

• Model: VSBC24L
• Brand: Allavino
• Address: 8520 Miralani Dr., San Diego, CA 92126
• Website: www.allavino.com
• Phone: 1.888.980.4809

Product Information

The Allavino Built-in Beverage Center (Model: VSBC24L) is designed to provide optimal storage for your beverages. It features a control panel, sliding shelves, front ventilation base, door hinge, adjustable feet, door handle, and lock for convenience and security.

Installation Instructions

Before using the appliance, carefully position and install it as described in the manual. Follow these steps:

1. Ensure proper ventilation around the unit.
2. Level the beverage center using the adjustable feet.
3. Plug the unit into a suitable power outlet.
4. Refer to the handle installation section for attaching the door handle.

Handle Installation

To install the handle:

1. Align the handle with the pre-drilled holes on the door.
2. Secure the handle in place using the provided screws and a screwdriver.
3. Ensure the handle is firmly attached for smooth operation of the door.

Operation Instructions

Follow these steps to operate the beverage center:

1. Use the control panel to set the desired temperature.
2. Adjust the sliding shelves to accommodate different bottle sizes.
3. Refer to the manual for light settings and door lock operation.
4. Regularly clean and maintain the unit as per the care instructions.

FAQ

• How can I adjust the temperature on the beverage center?
  You can adjust the temperature by using the control panel located on the unit. Refer to the operation instructions for detailed steps.

• What should I do if I encounter issues with the beverage center?
  Refer to the troubleshooting section in the manual for guidance on resolving common issues. If problems persist, contact Allavino customer support.

Diagram and Description

1. Control Panel
2. Sliding Shelves
3. Front Ventilation Base
4. Door Hinge
5. Adjustable Feet
6. Door Handle
7. Lock

Safety Tips

Before using this appliance, it must be properly positioned and installed as described in this manual, so please read carefully. To reduce the risk of fire, electrical shock or injury when using this appliance, follow these basic precautions.

Danger

• Plug into a grounded 3-prong outlet. Do not under any circumstances cut or remove the third ground prong from the power cord supplied, do not use an adapter, and do not use an extension cord.
• It is recommended that a separate circuit, serving only your appliance be used. Do not use outlets that can be turned off by a switch or pull chain.
• Never clean appliance parts with flammable fluids and do not store or use gasoline or other flammable vapors and liquids in the vicinity of this or any other appliance. The fumes can create a fire hazard or explosion.
• Unplug the appliance or disconnect power before cleaning or servicing. Failure to do so can result in electrical shock or death.
• Do not attempt to repair or replace any part of your appliance unless it is specifically recommended in this manual. All other servicing should be referred to a qualified technician.

Warning

• Use two or more people to move and install appliance. Failure to do so can result in back or other injury.
• To ensure proper ventilation for your appliance, the front of the unit must be completely unobstructed. Choose a well-ventilated area with temperatures above 60°F (16°C) and below 90°F (32°C). This unit must be installed in an area protected from the element, such as wind, rain, water spray or drips.
• The appliance should not be located next to ovens, grills or other high heat sources or in areas of extreme cold.
• The appliance must be installed in accordance with state and local codes. A standard electrical supply (115 V AC only, 60 Hz), properly grounded in accordance with the National Electrical Code and local ordinances is required.
• Do not kink or pinch the power supply cord of appliance.
• The fuse (or circuit breaker) size should be 15 amperes.
• It is important for the appliance to be leveled in order to work properly. You may need to make several adjustments to level it.
• Never allow children to operate, play with or crawl inside the appliance. Child entrapment and suffocation are not just problems of the past, junked or abandoned appliances are still dangerous. When no longer using your old beverage center, take off the door and leave the shelves in place so that children may not climb inside easily.
• Do not use solvent-based cleansers or abrasives on the interior as they may damage or discolor the interior.
• Because of potential safety hazards under certain conditions, it is strongly recommended that you do not use an extension cord with this appliance. However, if you must use an extension cord, it is absolutely necessary that it be a UL/CUL-Listed, 3-wire grounding type appliance extension cord having a grounding type plug and outlet and that the electrical rating of the cord be 115 volts and at least 10 amperes.
• If the appliance is going to be used in an area that is prone to power surges/outages, it is suggested that you use a power surge protector. The surge protector that you select must have a surge block high enough to protect the appliance it is connected to. Damages due to power surges are not considered a manufacturer covered defect and will void your product warranty.
• The cord should be secured behind the appliance and not left exposed or dangling to prevent accidental injury. Never unplug the appliance by pulling the power cord. Always grip the plug firmly and pull straight out from the receptacle. Repair or replace immediately all power cords that have become frayed or otherwise damaged. Do not use a cord with cracks or abrasion damage along its length or at either end. When moving the appliance, be careful not to damage the power cord.
• Do not use this apparatus for other than its intended purpose.
• California Proposition 65 Warning: This product may contain a substance known to the State of California to cause cancer, birth defects or other reproductive harm.
  Failure to heed these safety warnings may result in extensive product damage, serious personal injury, or death.

Installation Instructions

BEFORE USE:

• Remove the exterior and interior packaging.
• Before connecting the unit to the power source, let it stand upright for approximately 4 hours. This will reduce the possibility of a malfunction in the cooling system from handling during transportation.
• Clean the interior surface with lukewarm water using a soft cloth.
• Install handles.
• This appliance is designed for free standing or built-in (fully recessed) installation.
• Place the unit on a flat, solid floor that is strong enough to support it when it is fully loaded. To level the appliance, adjust the front leveling leg at the bottom of the unit.
• When moving your beverage center, please do not incline it more than 45 degrees.
• Locate the appliance away from direct sunlight and sources of heat (stove, heater, radiator, etc.). Direct sunlight may affect the acrylic coating and heat sources may increase electrical consumption. Extreme cold ambient temperatures may also cause the unit to perform improperly. The optimal ambient temperature range is 32°F – 100°F.
• Avoid locating the unit in damp areas.
• Plug the appliance into an exclusive, properly installed and grounded wall outlet. Do not under any circumstances cut or remove the third (ground) prong from the power cord. Any questions concerning power and/or electrical grounding should be directed to a certified electrician or authorized products service center.
• After plugging the appliance into a wall outlet, allow the unit to cool down for 3 to 4 hours before placing beverages in the appliance.

Handle Installation

• Step 1: Remove the box containing the handle and screws from the beverage center.
• Step 2: Pull out a bit of the rubber gasket from the back side of the holes.
• Step 3: Insert the screws through the holes and connect with the handle.

Operation Instructions

• The beverage center should be placed in an area where the ambient temperature is between 32-100 degrees Fahrenheit. If the ambient temperature is above or below this range, the performance of the unit may be affected. For example, placing your unit in extreme cold or hot conditions may cause the interior temperatures to fluctuate.

• Your Allavino Beverage Center includes an operating panel on the front of the unit. The operating panel includes several features to operate and control the temperature of the beverage center including:

  • Power – Turns the unit on or off
  • Light – Turns the interior light on or off
  • Lock – Press LOCK for 1.5 seconds to unlock the display panel, if nothing is pressed on the screen for 20 seconds, the LOCK will turn back on
  • + – Increases the temperature in 1 degree increments
  • – – Decreases the temperature in 1 degree increments
  • °C/°F – Toggles the temperature display between Celsius and Fahrenheit

Symbols:

•  Displays the desired temperature on an LED display
•  Displays the current temperature on an LED display
•  The “snowflake” symbol indicates that it is cooling when it is on, and stops cooling when it is off.
•  The “fan” symbol,When on, it indicates that the evaporator fan is running, and when off, it indicates that it stops running.
•  When on, it indicates that the machine is in rapid cooling (120Hz), and when off, it is not rapid cooling
•  This Symbol Indicates in defrosting
•  Lock Symbol- show the screen is locked when it is on
•  Light Symbol-when it is on, it indicates that the led is turned on, and when it is off, led light is turned off
•  Bell Symbol- When there is an alarm, the it will flash
•  This Symbol indicates that the unit is in internal settings.
  If you are going on vacation, you may leave the unit operating during vacations of less than three weeks. If the appliance will not be used for several months, you should remove all items and turn off the appliance. Clean and dry the interior thoroughly. To prevent mold growth, leave the door open slightly, blocking it open if necessary.

Setting Temperature

This Allavino Beverage Center has a temperature range of 32 to 64 degrees Fahrenheit. You can set the temperature as you desire by touching the + or – button. When you touch the buttons for the first time, the LED readout will show the original temperature set at the manufacturing facility. Each push of the button will  adjust the temperature by one degree in the desired direction. Please be aware that the desired temperatures may fluctuate depending on whether the interior light is ON or OFF and depending on the orientation of the bottles.

PLEASE NOTE:

• In the event of a power interruption, all previous temperature settings will be automatically saved and each compartment will return to the previous temperature setting.
• If the unit is unplugged, loses power, or is turned off, you must wait 3 to 5 minutes before restarting. Attempting to restart the beverage center before this time has elapsed may prevent it from starting.
• When you use the beverage center for the first time or restart the appliance after having been shut off for a long time, there will be a few degrees variance between the temperature you select and the one indicated on the LED readout for the first few hours of operation. After a few hours of operation, the temperature will normalize to the displayed temperature.

Light Settings

• The Allavino beverage center has 9 different color options and 5 different brightness levels to choose from.

• Color Options: C1=Red, C2=Orange, C3=Yellow, C4=Green, C5=Cyan, C6=Blue, C7=Purple, C8=White, and C9=Rotate All Colors

• Light Brightness: b1=20%, b2=40%, b3=60%, b4=80%, and b5=100%

• Factory default setting: Color: C9=All color rotation; Brightness: 40%

  • Light On/Off: Press the “LIGHT” button for less than 3 seconds and then release to turn the light on or off. The light will turn on or off gradually. The light on/off button controls lights on both zones together.

  • Color Selection: Press the “LIGHT” button for more than 3 seconds, until C1 as an example is shown on the display panel to enter the “LIGHT SELECTION” mode. Press the “UP” or “DOWN” buttons to select the color. The display panel will return to normal operation after 10 seconds of no activity.

  • Brightness Selection: Press the “LIGHT” button for more than 3 seconds. After C1 is displayed on the panel, press “LIGHT” button again to enter into “BRIGHTNESS SELECTION” mode. b1 will be displayed on the panel.
    Press “LIGHT” again to return to “COLOR SELECTION” mode.
    During either “COLOR SELECTION” or “BRIGHTNESS SELECTION” mode, press “LIGHT” button for more than 3 seconds to end the modes or leave it for 10 seconds.

  • The unit is programmed to remember your previous light settings in case the unit is powered off.

Induction of Opening the Door

1. When the left or right door is opened, the left or right fan stops running and the fan returns to normal after 1 minute. After 3 minutes, it will alarm. At this time, press any button casually, the alarm will be eliminated and return to the state of just opening the door. The alarm is eliminated after 5 minutes.
2. Opening the door when the light is off, the light will be on automatically. Close the door, the light will turn off automatically.

Racking Configuration

• Disperse your bottles evenly throughout the unit so as not to concentrate weight in any one area. This also helps to provide an even temperature range throughout the unit. Make sure that bottles are not all grouped together either at the top or bottom of the cabinet.

• The shelves are removable to help with cleaning and maintenance. To remove a shelf, pull it out as far as you can. There are levers on each side of the shelf near the rollers. Lift the lever on the left hand side and push down the lever on the right hand side to release the shelf from the tracks.

• The Allavino Beverage Center has 3 shelves that can hold up to 42 cans each and a bottom shelf that can hold up to 28 cans for a total storage capacity of 154 12 oz. cans. The top shelf can hold up to 56 standard beer bottles for a total capacity of 42 bottles and 112 cans.

Care and Maintenance

Cleaning your beverage center:

• Turn off the power, unplug the appliance, and remove all items.
• Wash the inside surfaces with warm water and baking soda solution. The solution should be about 2 tablespoons of baking soda to a quart of water.
• Wash the shelves with a mild detergent solution.
• Wring excess water out of the sponge or cloth when cleaning area of the controls, or any electrical parts.
• Wash the outside cabinet with warm water and mild liquid detergent. Rinse and wipe dry with a clean soft cloth.
• Dust the front grill and back of the unit twice yearly. Make sure the power is off before cleaning.
• It is recommended to clean the unit completely inside and out yearly to maximize the longevity of the product.

Moving your beverage center:

• Remove all bottles and any other items you may have inside the unit.
• Securely tape down all loose items (shelves) inside your appliance and tape the door shut.
• Turn the adjustable leg up to the base to avoid damage.
• Be sure the appliance stays secure in the upright position during transportation.
• Protect the outside of the appliance with a blanket or similar item.

Troubleshooting

There are many common issues you may experience with your beverage center that can be solved very easily, without the need of a service call. Try the tips below to troubleshoot your unit should you experience any problems:

off

The circuit breaker tripped or a fuse has blown out

Beverage center is not cold enough| Check the temperature control setting

External environment may require a higher setting The door is opened too often

The door is not closed completely

The door gasket is not sealing properly

Beverage center is turning on and off frequently| The room temperature is hotter than normal. The door is opened too often.

The door is not closed completely.

The temperature control is not set correctly.

The door gasket does not seal properly.

The light does not work| Not plugged in.

The circuit breaker tripped or a fuse has blown. The light bulb has burned out.

The light button is “OFF”.

Vibrations| Check to assure that the beverage center is on a level surface.
The beverage center seems to make too much noise| A faint humming noise may come from the flow of the refrigerant, which is normal.

As each cycle ends, you may hear gurgling sounds caused by the flow of refrigerator in your beverage center.

Contraction and expansion of the inside walls may cause popping and crackling noises.

The beverage center is not on a level surface.

The door will not close properly| The unit is not on a level surface. The gasket is dirty.

The shelves are out of position.

Technical Specifications

Bottle/Can Capacity

| ****

Up to 154 12 oz. cans or

112 cans and 42 standard beer bottles

---|---

Dimensions

| ****

33.9” H x 23.4” W x 23.6” D (25.6“ w/ handle)

Weight

| ****

136.8 lbs.

Voltage / Frequency

| ****

115v / 60 Hz

Running Amps

| ****

1.30A

Operating Temperature

| ****

32°F – 64°F

Ambient Temperature

| ****

32°F – 100°F

Warranty Information

WHAT IS COVERED LIMITED ONE-YEAR WARRANTY:
For one year from the date of purchase by the original owner, Allavino will, at its option, repair or replace any part of the unit, which proves to be defective in material or workmanship under normal use. During this period Allavino will provide all parts and labor necessary to correct such defects free of charge, so long as the unit has been installed and operated in accordance with the written instructions in this manual. Allavino will provide you with a reasonably similar replacement product that is either new or factory refurbished. In rental or commercial use, the warranty period is 90 days. All Allavino Appliances of 3.5 cubic feet capacity or less must be brought/sent to the appliance service shop for repair.

LIMITED SECOND THROUGH FIFTH YEAR WARRANTY:
For the second through the fifth year from date of original purchase, Allavino Products will provide a replacement compressor free of charge due to a failure. You are responsible for the service labor and freight charges. In rental or commercial use, the limited compressor warranty is one year and nine months. Cost to move the appliance to the servicers’ shop and back to the user’s home, as may be required, are the user’s responsibility.

WHAT IS NOT COVERED:

• Content losses of food or other, due to spoilage.
• Incidental or consequential damages.
• Parts and labor costs for the following will not be considered as warranty:
  • Door springs, and/or frames.
  • Inner door panels, door rails and/or door supports.
  • Light bulbs and/or plastic housing.
  • Plastic cabinet liners.
  • Punctured evaporator that voids the warranty on the complete sealed system.
  • Repairs performed by unauthorized servicers.
  • Shipping and handling costs associated with the replacement of the unit.
  • Service calls that do not involve defects in material or workmanship such as customer education, door reversal, or proper installation.
  • Surcharges including, but not limited to, any after hour, weekend, or holiday service calls, tolls, ferry trip charges, or mileage expense for service call to remote areas, including the State of Alaska.
  • Service calls that are related to external problems, such as abuse, misuse, inadequate electrical power, accidents, fire, floods, or acts of God.
  • Replacement of house fuses or resetting circuit breakers.
• Failure of the product if it is used for other than its intended purpose.
• This warranty does not apply outside the Continental USA.

SERVICE FOR YOUR BEVERAGE CENTER:
With the purchase of your Allavino appliance, you can have the confidence that if you ever need additional information or assistance, the Allavino Customer Service team will be here for you. Whatever your questions are about our products, help is available. Just call us toll-free.

ALLAVINO PRODUCT CUSTOMER SERVICES:
Product Information, Part Orders and In-Home Repair Service: 888-980-4809

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>