CANARE L-5.5CUHD 75 Inch Coaxial Cable Owner’s Manual
- July 13, 2024
- CANARE
Table of Contents
- Product Specifications
- General Specifications
- Electrical Characteristics
- Environment Characteristics
- Product Usage Instructions
- Maintenance Tips
- Scope
- General Specifications
- Rating, Standard
- Electrical Characteristics
- Mechanical Characteristics
- Environment Characteristics
- Frequently Asked Questions
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
CANARE L-5.5CUHD 75 Inch Coaxial Cable
Product Specifications
- Product Name: 75 Coaxial Cable
- Model Name: L-5.5CUHD
- Construction and Appearance: Refer to Fig.1 and Table 1 below
General Specifications
Construction Details
- No. of Conductor: 1
- Inner Conductor Construction (qty/mm): 1/1.35A
- Inner Conductor Nom. Cross Section Area (mm2): 1.43
- Inner Conductor Overall Diameter (mm): 1.35
- Insulation Thickness (mm): 2.10
- Insulation Overall Diameter (mm): 5.55
- Outer Conductor 1 Thickness (mm): 0.04
- Outer Conductor 1 Overall Diameter (mm): 5.6
- Outer Conductor 2 Construction (carr/end/mm): 24/8/0.12TA
- Outer Conductor 2 Pitch (mm): =91%
- Material: Flame Retardant Polyvinyl Chloride
Electrical Characteristics
- D.C. Resistance: ≤ 12.8 MPa
- Elongation of Sheath: ≥ 220%
- Permission Tension: ≥ 98 N
- Permission Bend Radius: More than 6 times the cable O.D.
Environment Characteristics
- Flame Retardance Test: Flame must extinguish naturally within 60 seconds according to specified tests.
- Inclination Test: Perform inclination test as per JIS C 3005 and UL1666.
Product Usage Instructions
Installation Guidelines
Follow these steps for proper installation of the 75 Coaxial Cable:
- Ensure the cable is handled carefully to avoid damage to the inner and outer conductors.
- Select appropriate connectors for secure connections.
- Avoid sharp bends during cable routing to prevent signal loss.
Maintenance Tips
To maintain optimal performance, consider the following:
- Regularly inspect the cable for any signs of wear or damage.
- Clean connectors periodically to ensure good signal transmission.
- Avoid exposing the cable to extreme temperatures or moisture.
Scope
This product specification covers the performance of the 75Ω Coaxial cable.
General Specifications
- Product Name 75Ω Coaxial Cable
- Model Name L-5.5CUHD
- Construction and Appearance As shown in Fig.1 and Table 1
- Weight Approx. 7.1kg / 100m
- Package 100m, 200m: Coil Over 300m: Wooden reel
Rating, Standard
- Rated Voltage AC 60Vrms
- Temperature Range -20 ~ +75°C
- Applicable Specifications UL Type CMR
Electrical Characteristics
Mechanical Characteristics
Environment Characteristics
Note: Testing must be performed under standard conditions set down in
“JIS C 60068-1 General Environmental Testing Rules(Electric/Electronics).”
Standard Conditions: Unless otherwise specified, all tests and
measurements should be performed within a normal temperature range of 15-35°C,
a relative humidity of 25-75%, and an atmospheric pressure of 86-106kPa.
Frequently Asked Questions
Q: What is the maximum voltage-proof characteristic of the cable?
A: The voltage-proof characteristic of the cable is specified to be greater than or equal to 220%.
Q: How many times can the cable be bent after installation?
A: The cable can be bent more than 6 times of its outer diameter after installation.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>