RUPES 9HB120LT Li-ION Battery Pack Instruction Manual

RUPES 9HB120LT Li-ION Battery Pack

Product Information

Product Specifications:

• Model: 9HB120LT
• Voltage: 10.8V
• Capacity: 2.5Ah
• Chemistry: Lithium Ion

Product Usage Instructions

Storage Temperature:
Store the battery pack within the recommended temperature range for optimal performance.

Charging Instructions:
Follow the charging instructions provided in the user manual of the electric device HR81M – HR81ML – HQM83 – HQM83L and the battery charger 9HC120LT.

Frequently Asked Questions

Q: What is the voltage and capacity of the 9HB120LT battery pack?

A: The 9HB120LT battery pack has a voltage of 10.8V and a capacity of 2.5Ah.

Q: What is the recommended storage temperature for the battery pack?

A: It is recommended to store the battery pack at normal room temperature for best performance.

Q: How should I charge the battery pack?

A: Follow the charging instructions provided in the user manual of your electric device and the specific battery charger mentioned for optimal charging.

WARNING
For your safety, READ and UNDERSTAND the instruction manual before using.

EXPLANATION OF SIGNAL WORD

WARNING:
Indicates a potentially hazardous situation, which, if not avoided, could result in death or serious injury and/or property damage.

SAFETY WARNING

General Battery Safety Warnings

• Warning! Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric shock, fire, and/or serious injury.
• Save all warnings and instructions for future reference.
• Always install, operate, inspect, and maintain this product by all applicable standards and regulations (local, state, country, federal, etc.). Compliance is your responsibility. Failure to follow standards and regulations can cause personal injury.
• The term “power tool” in warnings refers to your battery-operated Rupes BIGFOOT NANO IBrid tool HR81M/HR81ML – Q-MAG NANO IBrid tool HQM83/HQM83L.

Electrical Safety

• Do not expose batteries or power tools to rain or wet conditions. Water entering a battery or power tool will increase the risk of electric shock.

Personal Safety

• Do not modify this product, safety devices, or accessories. Unauthorized modifications may result in electric shock, fire, or personal injury.

Battery and Power tool use and care

• Do not expose a battery pack or tool to fire or excessive temperature. Exposure to fire or temperature above 130°C may cause an explosion.
• Store idle batteries and power tools out of the reach of children and do not allow persons unfamiliar with the battery or power tool or these instructions to operate the battery or power tool. Batteries and power tools are dangerous in the hands of untrained users.
• Use the battery, power tool, accessories tools bits, etc. by these instructions, taking into account the working conditions and the work to be performed. Use of the battery or power tool for operations different from those intended could result in a hazardous situation.
• Recharge only with the charger-specified cod. 9HC120LT. A charger that is suitable for one type of battery pack may create a risk of fire when used with another battery pack. See the Li-ION Battery Charger 9HC120LT instruction manual for additional charger-specific warnings.
• Use power tools only with specifically designated battery packs. Use of any other battery packs may create a risk of injury and fire.
• When the battery pack is not in use, keep it away from other metal objects, like paper clips, coins, keys, nails, screws, or other small metal objects, that can make a connection from one terminal to another. Shorting the battery terminals together may cause burns or a fire.
• Under abusive conditions, liquid may be ejected from the battery; avoid contact. If contact accidently occurs, flush with water. If liquid contacts the eyes, additionally seek medical help. Liquid ejected from the battery may cause irritation or burns.
• Immediately stop use and replace any battery that gets excessively warm in use or offers very short usage times. Typically these batteries have a high number of charge/discharge cycles or may be old or damaged. Continuing to use an impaired battery may result in injury or property damage from heat, fire, or explosion.
• Do not remove any labels. Replace any damaged label. Labels provide the information required for the safe use of the product.
• Do not subject batteries to mechanical shock.
• Do not leave a battery on prolonged charge when not in use.
• When possible, remove the battery from the equipment when not in use.
• Do not use the batteries which have been physically damaged.
• Never disassemble the battery pack. Contact a Rupes service facility for all repairs Service.
• Do not dispose of batteries in fire, incinerate, or heat above 100°C (212°F). Batteries present a risk of fire or chemical burn if mistreated.
• Responsibly recycle or dispose of batteries under all applicable standards and regulations (local, state, country, federal, etc.). Improper disposal may endanger the environment.
• Do not open the cover or casing. There are no user-serviceable items inside. An electric shock or other personal injury may result.

INFORMATION ON PRODUCT SAFETY

Intended Use:
The battery pack 9HB120LT/9HB125LT (Fig. 1) is used as the power source for Rupes BIGFOOT NANO iBrid tool HR81M/HR81ML – Q-MAG NANO iBrid tool HQM83/HQM83L Fig.2.

Summary of device labels containing safety information Symbology

Li-Ion

| The product contains Lithium-Ion. Do not dispose of this product with household rubbish
| CE mark for the EU market| Ah| Ampere per hour
| Volts Direct Current| Wh| Watt per hour

Product specifications

WARNING:
for technical data refer to the label of Battery pack 9HB120LT/9HB125LT

Model| Chemistry| Voltage (V)| Capacity (Ah)| Energy (Wh)| Weight (Kg)
---|---|---|---|---|---
9HB125LT| Lithium Ion| 10.8| 2,5| 27÷27,75| 0.183 ±0.005
9HB120LT| Lithium Ion| 10.8| 2| 27÷27,75| 0.183 ±0.005

When to charge
Follow the instructions for charging the battery in the operating instructions for the Power tool HR81M – HR81ML – HQM83 – HQM83L and the Battery Charger 9HC120LT.

Operating temperatures

Rechargeable batteries give their best performance when they are operated at a normal room temperature. Follow the specifications:

Operating temperature| Charge: 0 to 45°C
Discharge: 0 to 45°C
---|---
Storage temperature| 20 -25°

An excessively hot or cold battery may prevent or interrupt the battery from being charged or discharged.

COMPLIANCE WITH EU DIRECTIVE 2006/66/EC
At the end of its useful life, this product under European Directive 2006/66/EC and its implementation in national law, must not be released into the environment or thrown away as domestic waste but must be disposed of at authorized recycling centers. Disposing of the product correctly contributes to protecting human health and safeguarding the environment.

EU DECLARATION OF CONFORMITY

We declare our responsibility that the represented battery pack conforms with the directives: RoHS Directive 2011/65/EU, Battery Directive 2006/66/EC. The tests have been carried out by standards:

• EN 62133:2017 + A1:2021;
• EN IEC 63000:2018.

Technical file at RUPES SpA
Via Marconi, 3/A – Loc. Vermezzo 20071 – Vermezzo con Zelo (MI) – Italy.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>