DAHUA NVR Hard Disk and Recording Settings User Guide
- July 12, 2024
- Dahua
Table of Contents
DAHUA NVR Hard Disk and Recording Settings
Product Information
Specifications:
- Product Name : DAHUA NVR
- Function: Installation of hard disk and recording settings
Product Usage Instructions
Installation of Hard Disk
- Open the NVR shell carefully.
- Install the hard disk onto the NVR securely.
- Restart the NVR to ensure the hard disk is recognized.
Recording Settings
- Log in to the NVR GUID interface.
- Click on Main Menu, then navigate to STORAGE and select Disk Manager
- Check if the hard disk is properly installed on the NVR.
- Format the hard disk using the options available in Disk Manager.
Setting Record Mode
- Select record mode on the NVR interface.
- Tick ‘Auto’ for both the mainstream and sub-stream to enable automatic recording.
Overwrite Setting
- Enable the overwrite function on the NVR.
- When the hard disk recording is full, the system will automatically overwrite the oldest video files.
FAQ
- Q: What should I do if the hard disk is not recognized by the NVR?
- A: Ensure that the hard disk is properly installed and securely connected. Restart the NVR and check again in Disk Manager.
- Q: Can I set specific recording schedules on the NVR?
- A: Yes, you can set up recording schedules in the NVR settings to suit your requirements.
INSTALLATION
DAHUA NVR installation hard disk and recording settings
- Open the NVR shell, install the hard disk on the NVR, and restart the NVR.
- Log into the NVR GUID, click “Main menu-STORAGE-Disk Manager” to check whether the hard disk is installed on the NVR and format the hard disk.
- Select record mode. Tick “Auto” at the mainstream and sub-stream.
- open the overwrite, When the hard disk recording is full, the system will automatically overwrite the oldest video
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>