AMFLOW PL Carbon Electric Bike Installation Guide

AMFLOW PL Carbon Electric Bike

Specifications

• Model: PL Carbon
• Weight: 50-120 kg
• Torque Specifications: 4 Nm, 5 Nm, 9 Nm, 15 Nm

Product Usage Instructions

Assembly
Follow the instructions below to assemble the bike

1. Install the Handlebar and Right Brake Lever using the specified torque values.
2. Assemble the Front Wheel and align the Stem properly.
3. Install the Pedals and use the Dropper Seatpost as needed.

Tire Inflation
Before riding, inflate the tires to the recommended pressure based on your weight. Use a Presta valve pump with an air pressure gauge and do not exceed the maximum pressure limit.

Fork and Shock Set-Up
Adjust the fork and rear shock according to your weight. Make sure not to exceed the manufacturer’s maximum pressure limits. Refer to the manufacturer manual for specific adjustments, especially for PL Carbon Pro models.

Shock Air Pressure

Fork Adjustment
Adjust air pressure and rebound based on the recommended range printed on the fork. Follow the guidelines for Compression and Rebound adjustments provided in the manual.

FAQ

• Q: Where can I find more information about product usage and maintenance?
  

  • A: Refer to the User Manual for detailed information on product usage and maintenance.

• Q: How should I tighten the pedals to avoid loosening during riding?
  

  • A: The required torque for each pedal is 30-35 Nm. It is recommended to consult local authorized retailers or use professional tools to properly tighten the pedals.

QUICK START GUIDE

Read following instructions carefully before use and keep them for future reference. PL Carbon is used as an example. The illustrations in this guide may differ from the actual product. It is important to properly use the torque wrench during assembly to make sure all fasteners are tightened to the required torque.

https://www.amflowbikes.com/intro/pl-carbon/downloads

https://www.dji.com/avino

1. Install the Handlebar

   • Install the Right Brake Lever

2.  Assemble the Front Wheel

   •  Align Stem and Front Wheel
     Tighten the Stem

3. Install the Pedals

4. Use the Dropper Seatpost

5. Control Display and Wireless Controllers Pair and Activate Charge the Battery

• Contact your local authorized AMFLOW retailer for help if you are not sure about the assembly steps.
• Keep the bicycle box and all packing material so that you can repack your bicycle for transporting.
• Refer to the User Manual for more information about usage and maintenance.
• For other components, the applicable torque specifications can be found in the manufacturer manual or the printed section near the bolt.

The front brake is on the left-hand side of the handlebars and the rear brake is on the right-hand side of the handlebars by default. Switch brake lever positions according the the regulations in your country or region.

The pedals in the package are for trials only. Do not use the pedals for mountain biking. The required torque of each pedal is 30-35 Nm. It is recommended to ask local authorized retailers or use professional tools to fully tighten the pedals to avoid loosening during riding.

Inflate the Tires
Before riding, inflate the tires to the recommended pressure according to the total weight (rider and payload). Prepare a Presta valve pump with an air pressure gauge.

Refer to the sidewall of the tire for the pressure range. Do not exceed the maximum pressure limit.

Set Up Fork and Rear Shock
Before riding, set up the fork and rear shock according to the total weight (rider and payload). While riding, you can further adjust as needed based on your experience and terrain conditions.

• Do not exceed the maximum pressure limit of the manufacturer.
• The models of the fork and rear shock are different for PL Carbon Pro. Refer to the manufacturer manual for more information about the adjustment.

Shock

The recommended air pressure range by AMFLOW is shown in the table.

Rebound adjustment: Turn the rebound knob clockwise until it stops, then turn it counter-clockwise to the number of clicks shown in the table below.

Fork
Adjust the air pressure and rebound according to the recommended range printed on the fork.

@Amflow Bikes

https://www.amflowbikes.com/support

AMFLOW is a trademark of AMFLOW.
Copyright © 2024 AMFLOW All Rights Reserved.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>