HAVIT Creek Wearable S1 Smart Watch User Guide
- July 11, 2024
- havit
Table of Contents
HAVIT Creek Wearable S1 Smart Watch
Product Usage Instructions
For optimal data accuracy, follow these guidelines:
- Wear the watch approximately two finger-widths from your wrist bone.
- Adjust the band for comfort with a finger’s width between it and your wrist.
- Press the Digital Crown until the startup screen appears.
- Note: If the watch doesn’t power on, charge it for approximately 10 minutes.
- Step 1: Download the Fitbeing app from the app store on your phone or scan the QR code to install it.
- Step 2: Pair your CW Watch S1 via Bluetooth with the Fitbeing app to start using the watch.
- Attention: Grant Fitbeing App permissions to access Bluetooth, Location, and Camera on your phone for successful pairing.
- Touchscreen Operation: Utilize full-screen touch gestures like swipe, tap, and touch and hold.
- Digital Crown Operation: Press to wake up the screen, enter the app center, or force restart by long-pressing for 8 seconds.
Common Functions
- Notification Center: Swipe down on the watch face screen.
- Change Watch Face: Press and hold the screen for 1 second to access the watch face gallery.
- Control Center: Swipe up on the watch face screen to adjust settings quickly.
- Tiles: Swipe left or right to switch between activity, heart rate, sleep, and more.
- Record Workouts: Access the Workout app to start specific workouts.
- Health Metrics Measurement: The watch automatically measures health data like heart rate, sleep, stress, and activity.
FAQ
- How long does the battery last on CW Watch S1?
- The battery life can vary based on usage but typically lasts around 2-3 days with regular use.
- If you encounter any problems while using the product, you can access the “Profile → Help & Support” section in the Fitbeing app for assistance.
- Scan the QR code on the right to access or visit help.fitbeing.net for assistance.
Product Manual
- You can find the complete product manual in the Fitbeing app at “Profile → User Guide”.
- Scan the QR code on the right to access it, or visit help.fitbeing.net to browse.
Your Watch
Steps for Use
- You can follow these steps to use Watch :
- The following steps will take approximately 5 to 10 minutes, please schedule a suitable time.
Wear Your Watch
For optimal data accuracy, please observe the following guidelines while wearing the watch:
- Wear the watch at a position approximately two finger-widths from your wrist bone.
- For comfort, adjust the band to allow a finger’s width between it and your wrist. This ensures both contact and fit.
Power On
- Press the Digital Crown until the startup screen appears.
Note: If the watch can’t power on, it may be because the battery has drained due to long periods of inactivity. Please charge it for approximately 10 minutes and wait for it to power on automatically.
Set up the Watch
Step 1: Download the Fitbeing app
- Go to the app store on your phone, search for Fitbeing, and install it.
- For Android phones, go to the Google Play.
- For iPhone, go to the App Store.
You can also scan the QR code on the left to quickly go to the Fitbeing app in the app store, and install it.
Step 2: Pair with the App
- Open the Fitbeing app and select “Set Up a Device” on the home page. Follow the instructions to pair your “CW Watch S1” via Bluetooth. Then you can start using the watch.
Attention
- To prevent connection issues between the app and the watch, please do not pair directly within the Bluetooth device list in your phone’s system settings.
- To ensure successful pairing, please grant Fitbeing App permissions to access Bluetooth, Location, and Camera on your phone.
Get Started
Touchscreen Operation
Support full-screen touch (swipe, tap, touch and hold)
Digital Crown Operation
Press
- Press the digital crown to wake up the screen.
- Press the digital crown to enter the app center from the watch face screen.
- Exit the app
Long press for 8 seconds to force restarting the watch.
Rotate
- Toggle between screens or navigate through menus.
- Adjust the volume of prompt tones and phone calls.
Common Functions
Notification Cente
- Swipe down on the watch face screen.
Control Center
- To access the Control Center, swipe up on the watch face screen. Enable features like Silent Mode, Sleep Mode, and Always-on Display, and adjust brightness and volume swiftly.
Tiles
- To switch quickly between the Activity, Heart Rate, Sleep, Recently, Weather, or Workout tiles, swipe left or right on the watch face screen.
Change the Watch Face
- To change the watch face, press and hold the screen for 1 second to access the watch face gallery.
Record Workouts
-
To start your workout recording, access the Workout app and select a specific workout.
-
For outdoor workouts, wait in an open area until the GPS connects. The blinking icon “ ” shows it’s acquiring a location fix and will stop blinking upon success.
Health Metrics Measurement
- When wearing the watch, it automatically measures health data such as heart rate, sleep, stress, and activity. You can also view and track this data in the application.
Install New Watch Faces
- In the Fitbeing app, navigate to the Face Gallery page to pick up your preferred watch face.
Charge the Watch
To charge the watch, connect the charging cable to a USB power source. Attach the other end to the charging contact on the back of the watch. The watch will display a charging icon while it is being charged.
Note
- Make sure the USB charging plug is at the same side as the crown.
- Ensure to use a standard USB power source with an output of 5V⎓1A or above.
- Prior to charging, ensure to clean the charging contacts of the watch to eliminate any lingering sweat or moisture.
Change the Band
Remove band
- Lift the spring bar from the groove.
- Push and hold the spring bar.
- Pull it out gently to remove the band.
Install band
- Insert the metal pin at position “A” in the hole.
- Push and hold the spring bar.
- Press the band into the body and release the spring bar.
- Pull the watch band to confirm the firm installation.
Wear and Care
- It is advised to remove the watch for approximately one hour daily. If you experience discomfort or irritation like redness, tingling, or a burning sensation, take off the watch and rest your wrist.
- To maintain hygiene, regularly clean your watch and wrist, particularly after workouts and sweating. Avoid using hand soap, shower gel, dishwashing liquid, or cleaning wipes as they can cause skin irritation. Instead, use mild soap and fresh water to clean the band.
Design for Comfortable Wearing
- The inner sweat grooves of the band are specifically designed to minimize skin irritation resulting from sweat, moisture, and prolonged wear.
Key Specifications
- Product Name: SMART WATCH
- Display: 1.78 inch AMOLED
- Resolution: 368 × 448
- Battery Capacity: 350 mAh
- Wireless Connection: Bluetooth
- Water resistance grade: IP68
- Body Dimension: 45.9mm × 38.5mm × 12.4mm
- Working Temperature: 0°C ~ 50°C
- Compatible Operating Systems: iOS 12.0 and above, Android 7.0 and above
Precautions
- Do not replace the built-in battery yourself as it may pose a safety risk.
- Avoid forcibly opening the watch case, as it may cause short circuits and overheating.
- Keep the watch away from environments exceeding 60℃ to prevent battery leakage or explosion.
- While the product complies with IP68 waterproof standards, it is not recommended for activities such as bathing, diving, or water skiing that involve high temperatures, steam, or rapid water flow.
- Note that the waterproof performance may be compromised if the product structure is damaged.
- Be aware that firmware upgrades can lead to interface and usage changes. For detailed information, please refer to the product’s upgrade instructions.
FCC STATEMENT
FCC Requirement
- Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
- This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- this device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, according to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses,
and can radiate radio frequency energy, and if not installed and used under
the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment . This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
ISED
This device contains license-exempt transmitter(s)/receiver(s) that comply
with Innovation, Science and Economic Development Canada’s license-exempt
RSS(s). Operation is subject to the following two conditions:
- This device may not cause interference.
- This device must accept any interference, including interference that may cause undesired operation of the device.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>