SAMSUNG RT18DG6500SR 18 cu ft Top Mount Refrigerator Owner’s Manual
- July 9, 2024
- Samsung
Table of Contents
SAMSUNG RT18DG6500SR 18 cu ft Top Mount Refrigerator
Product Information
Specifications
- Model: RT18DG6500SR
- Type: Top-Mount Refrigerator
- Capacity: 18 cu. ft.
- Width (fits 29″ opening): 28 3/4″
- Depth to Door: 31 7/8″
- Height without Hinge: 65 3/4″
- Height with Hinge: 66 3/4″
- Depth: 57 7/8″
Product Usage Instructions
Measurement and Installation
- Standard-depth refrigerators typically measure 30 to 35 inches in depth.
- Measure height including flooring and width including countertop overhang.
- Allow for hinge clearance height, molding, or trim during installation.
- Ensure proper clearances for air circulation, water/electrical connections, and ease of installation.
Installation Guidelines
- Allow 3.75″ of clearance when installing along a wall for the door to open fully.
- Maintain a minimum clearance of 2″ at the rear for proper air circulation.
- Provide a minimum clearance of 3/8″ at the sides and top for ease of installation.
- Do not install the refrigerator next to a wall for optimal door opening ability.
Delivery Route Preparation
- Identify the narrowest opening for the appliance’s travel route.
- Ensure the appliance’s depth or width is smaller than the narrowest opening width.
Please note: Refer to the manual for detailed installation instructions.
Frequently Asked Questions (FAQ)
-
Q: Can I install this refrigerator next to a wall?
A: For optimal usage and door opening ability, it is recommended not to install the refrigerator next to a wall. -
Q: Where can I find complete installation details?
A: For complete installation details, refer to the manual provided with the product or download it online at samsung.com.
Be sure your new fridge will fit
Don’t wait until delivery to be sure your new refrigerator will fit – both in your kitchen and through all doorways. This guide includes all pertinent measurements and clearances so you can buy with confidence.
Standard-Depth Refrigerator
Standard-depth refrigerators typically measure 30 to 35 inches in depth, as opposed to counter-depth refrigerators that sit flush with cabinetry.
Installation clearances
- Allow 3.75″ of clearance when installing along a wall. This will allow for the door to open 90 degrees without the handle contacting the wall.
- Allow 2″ minimum clearance at rear for proper air circulation and water/electrical connections.
- Allow a 3/8″ minimum clearance at sides and top for ease of installation.
For optimal usage and ability to open refrigerator doors completely, do not
install next to a wall.
Please note: The above dimension and cutout information is for planning
purposes only. For complete installation details, consult manual packed with
product, or download manual online at samsung.com.
Walk the delivery route
- Identify the narrowest opening that the appliance will travel, from outside the home to the location where it will be installed.
- Appliance depth or width must be smaller than the width of the narrowest opening.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>