H Koenig stm45 Vertical Garment Steamer Instruction Manual
- June 5, 2024
- H Koenig
Table of Contents
H Koenig stm45 Vertical Garment Steamer
PRODUCT INTRODUCTION
FEATURES AND PURPOSE:
The device is a kind of strong steam ironing machine with cleaning function as a supplement. It is elegant in design, simple, economical and safe, especially applicable for households, garments, wedding dresses, curtains, sofas, hotels, restaurants, etc. The machine irons especially well the pure silk, woolens, chemical fiber, cotton and blending textiles, flattens them fast without damage and also sterilizes and cleans them. However, it only asks easy maintenance and repair. The machine has been granted with several national and international patents (including the design patent, utility model and invention patent).
PRECAUTIONS
SAFE PROTECTION
-
Thermostat
The thermostat would keep the temperature at a rated value by means of the control current when the tank is short of water. -
Hot fuse
In case the thermostat damages or fails, the hot fuse of protective device gives protection by cutting off the power supply of machine body when the machine reaches a certain temperature.
Warning:
- Do not eject the steam directly towards people or animal, or scald may be caused.
- Only use the detachable accessories when there is no steam and they are cooled down to avoid scalds.
- Conduct the installation in accordance with the instructions. Do not dismantle without authorization.
- The liquid or steam must not be directed towards equipment containing electrical components, such as the interior of ovens
NOTICES
- Do not operate the machine unless you read this manual thoroughly. The machine can only be used indoors.
- The machine can only be used for the purposes described in this manual. Utilization for other purposes is prohibited.
- The water for the machine shall be domestic potable water to avoid contaminating the textiles. Purified water is recommended.
- Make sure the working voltage of the machine accords with your domestic supply voltage and the machine is connected to power supply mounted with 30mA creepage protection switch. Only the firmly grounded 3-pole socket is applicable for the machine. The rated current shall be not less than 15A.
- Thoroughly stretch the power cords before use. Avoid sharing the same power supply with other high-power electric appliances. Do not use wiring board in order to prevent fires arising from the wiring board overloaded.
- Before operation, connect all the necessary ironing or cleaning accessories, fill the outer tank to full and then turn on the power supply switch.
- Thoroughly stretch the expansion link to ensure that the steam hose is unobstructed and untwisted and other functions perform well.
- The machine shall be put on a flat and stable place.
- Do not fill hot water in the tank, or the tank would deform. Fill water before operation and observe the water level from time to time. Add water to proper volume in case it is below the designed water level.
- Do not directly put the machine under water tap to fill water.
- Do not fill solutions such as detergent into the tank.
- Keep power cords and steam pipes from metals or other heating elements.
- Do not leave the machine operating without attention.
- This appliance may be used by persons with reduced physical, sensory or mental capabilities or lack of experience or knowledge, provided that they are supervised or instructed in the safe use of the appliance and that they fully understand the potential hazards.
- Children shall be monitored to be prevented from playing with the machine.
- During operation, keep the ironing brush away from people, animal or domestic electric appliance. When the machine is not in use, turn off the steam jet switch and put the ironing brush on the support to avoid steam hurting people or damage things.
- During operation, do not touch the steam jet outlet and steam conduit of the ironing brush or drag the power cords.
- Do not put on floor or distort the steam conduit, or accidents may be caused by the steam jammed in the steam conduit when it is squeezed.
- Do not drag the steam conduit by force or to move the machine, or the steam conduit may be damaged or steam may leak.
- Do not pull out or plug in the steam conduit when the machine is still hot but only when the machine is cooled down, thus to avoid scald.
- If the ironing brush falls, has visible damage or is leaking, stop using it.
- To avoid scald by steam, after operation, turn off the power supply, pull out the plug and, when the machine is cooled down, pour out the remnant water, and then have the machine packed and stored. However, let the machine air dried before packing and storage. Do not pull put the plug by dragging the power cord.
- Use dry soft cloth and neutral detergent to clean the machine surface and do not use solvents such as gasoline, alcohol, banana oil, etc. Prevent liquids penetrating into the machine.
- Do not soak the machine, power cord or plug in water or other solutions. Do not keep the machine in places which are damp, exposed or of corrosive gases.
- Keep the machine away from flammable or explosive objects.
- Please clean the filter sieve at regular intervals to keep it available. The machine shall be cleaned or maintained from time to time (every 1 month or 20L water is consumed). (See the following sections for the cleaning and maintenance)
- Push the support pole to move the machine. Do not move the machine by force when it is tough to be moved. Discharge the water before checking the wheels. Turn off the power supply and pull out the plug before moving the machine.
- Turn off the power supply and pull out the plug before discharging water from or filling water in the tank. Avoid water leakage. Do not open or take down the tank in use.
- If find any damage on the accessories especially the safe protection and power cord, stop using the machine and inform our professional personnel of service center for repair. Do not repair at your own discretion.
- Before cleaning or repairing the machine, turn off the power supply, pull out the plug, release the pressure inside the heating element of the base and let the machine cool down.
- This appliance may be used by children of at least 8 years of age, as long as they are supervised and have been given instructions about using the appliance safely and are fully aware of the dangers involved.
- Cleaning and maintenance should not be carried out by children unless they are at least 8 years of age and are supervised by an adult.
- Keep the appliance and its power cord out of reach of children under 8 years of age.
- When using electrical equipment, safety precautions must always be taken to prevent the risk of fire, electric shock and/or injury in the event of misuse.
- Please keep this document at hand and give it to the future owner in case of transfer of your device.
- The device is not intended to be operated by external timer means or a remote control system.
- The device must not be used if it has been dropped, it obvious signs of damage are visible or if it has leaks.
- This appliance is only intended for domestic and indoor use.
- Your appliance has been designed for domestic use only. It is not intended for use in the following situations which are not covered by the warranty:
- in staff kitchen areas in shops, offices and other professional environments,
- in farm hostels,
- by guests in hotels, motels and other residential environments,
- in bed and breakfast type environments.
Do abide by the following for the safety of yourself and others.
Notices
Notices
Plug the power plug in thoroughly to avoid electric shock, as well as open
circuit, short circuit, smoking and flammation caused by over-heat of plug.|
Use the socket with rated voltage of 220V- 250V separately from other electric
appliances, otherwise, fire may occur due to heat.
No watering: danger of short circuit and electric shock.| Do not pull or plug
the plug with wet hand in respect of electric shock.
Do not use broken or loose socket in respect of electric shock, short circuit
and flammation.| Keep away from the steam hole to avoid burn.
Do not intend to refit, remove or repair the product in respect of
fire, electric shock or
| Keep it away from the children or others unable to operate.
---|---
other injuries.|
Do not insert the metal| Remove the dust on
needle into heat| power plug at regular
dissipation hole or| intervals, otherwise,
clearance in respect of| fire accident may
injury caused by electric| occur due to poor
shock.| insulation.
Do not put the product in water or damp environment or close to other heat
sources, and do not put the inner boiler on the naked fire.| Do not touch the
hot part, especially the surface of steam jet of ironing brush during or after
the operation.
Hold the plug rather
than haul the power cord to pull out the
| Do use the attached
power cord which shall not be used for other
power plug.| equipment.
Do not operate on the| If not in use, pull the
unstable platform or| power plug out of the
cushions which could| socket to avoid electric
not receive heat in| shock, creepage and
respect of injury or fire| fire arising from
caused by fallen ironing| damages and
brush.| insulation ageing.
Wash the ironing brush| Do not put it close to
---|---
after totally cooling| wall or furniture in case
down to avoid scald.| the steam leads to
| color change or
| distortion of which.
| Keep it over 30cm
| away from the wall and
| furniture.
PRODUCT VIEW
PRODUCT INSTALLATION
Take out the appliance from the giftbox and spread the power cord
Take out the supporting bar; Insert the supporting bar to the right hole of base, then locking it
Put commodity shelf at the top pole, it can be adjusted the appropriate height
if needed.
Take out hanger and assemble the hook to the left side of hanger. Then insert the hanger from top of support pole.
Lift down the hood of connecting hole, take out the ironing brush, align the plug of ironing brush with and insert it into the corresponding hole on machine body, and tighten it clockwise. After using, please pull out the ironing brush and cover the hood. If required, take out the fur brush, align the plastic clasps at bottom of fur brush with and grip it into the metallic snap close at the bottom of ironing brush. The dismounting is in a reverse order.
PARAMETERS
- Rated power: 2180W
- Voltage: 220V-240V~50Hz
- Steam pressure: 1.5bar
- Steam flow: 35g/min (max)
- Tank capacity: 1600ml
PRODUCT OPERATIONS
Ironing:
- Stand the machine assembled on flat and stable floor. Adjust the height and spread range of the hanger as required and hang the clothes on it. Ensure there is enough water in the water tank and the tank is located properly. Plug the plug into the power socket, select the appropriate gear. Let the machine preheat for about 40s, waiting for steam of ironing brush.
- Iron from the main part of clothes, hold the lower hem by hand gently to make the wrinkled part flat and iron the rippled fibers out by the hot steam (as shown in Picture 2).
- Press gently the metal panel of ironing brush on the clothes, move the brush up and down at such a speed that the steam penetrates into the fibers appropriately for hot forming.
- After ironing the main part, ironing the specific parts from up to down. When ironing the collar, you may fold the whole collar back, hold one end of the collar by hand, move the ironing brush horizontally and, during when, be careful of the hot steam (as shown in Picture 3).
- When ironing the sleeves, pull the sleeves to straight and move the ironing brush along the sleeves.
- After ironing the front of clothes, turn the clothes over to iron its back.
Ironing Pants Line:
Take out the pants line clip, insert the metallic clasps at bottom of ironing
brush into plastic slot of the pants line clip, press down the handle to open
the interface between pants line clip and ironing brush, clasp the pants line
and move the ironing brush gently up and down to make the pants line rightly
straight. The dismounting is in a reverse order.
PRODUCT MAINTENANCE
- . Purified water is recommended in order to avoid contaminating the textiles. The contents of mineral substance differ in various kinds of water, so there would be sediments to respective extents if the ironing machine is applied with water of different qualities, which makes the steam flow lessens, intermits or even stops. Therefore, in order to avoid contaminating the textiles, the purified water is recommended. However, the two filters inside the steam gun may filter away the impurities in the water and the boiler scale in the heating element, thus to make the water clear.
- To better maintain the machine, the machine, when used for a certain period, may be cleaned or maintained as follows, in which we suggest to take the both steps together:
- Cleaning the water tank >>>Related parts: water tank and tank filter
-
Cleaning frequency: Clean every 1 month or 20L water is consumed, which period may be prolonged or shortened according to the actual water quality.
> > Cleaning steps:
- Pour the remnant water out of the tank;
- Screw out counterclockwise the tank filter;
Take apart the filter, rinse with clear water all its accessories as well as
the water tank, after which, put the filter back into the bottom of tank and
tighten it clockwise.
Using the water outlet to clean the heating element
> >>Related parts: heating element, metal cleaning plug
> >>Cleaning frequency: Clean every 1 month or 20L water is consumed,
which period may be prolonged or shortened according to the actual water
quality.
> >> Precautions: Before cleaning, turn off the power supply, pull out
the plug and let the machine cool down.
> >> Cleaning steps:
Turn off the power supply, pull out the plug, take down the support pole and
tank, turn over the machine body on carpet (to avoid scratching the machine),
lift up the hood of cleaning hole, screw out counterclockwise the cleaning
plug with a slotted screwdriver and take it out. Rinse the cleaning plug, and
get the sediments out of the plug by an iron wire, and get the inner refill
through with the same method, get rid of the dirt and rinse it, after which,
put the cleaning plug back (screw down by the screwdriver) and then cover the
hood of cleaning hole back.
MAINTENANCE
According to the functions of various series of Huaguang fabric steamer, in order to increase its life-span, users must follow the daily maintenance and maintenance way.
- Correctly use the product according to the instruction. After each use, cut off the power, put away the power plug and picked up the power cord.
- After the appliance is completely cool down, pour rest water out of the water tank… Clean and dry the water tank then placed it on the base plate.
- Spin-off the multi-function plug in sequence. Use a cleaning cloth to clean and dry components of brush or spray.
- Remove the hanger clothes-rack lifting bar. Then use a cleaning cloth to clean them and dry.
- After every use, wait for the appliance to completely cool down, unscrew the release water nut and pour rest water out of the boiler. Then clean the boiler and dry.
- Put all components which had been cleaned into the giftbox in sequence. Then stored it in ventilated dry place.
FAULT RECOVERY
Fault Recovery
Fault| Cause| Solution
The machine does not work or the indicator light of switch is not lighted|
Power-off or fusion of fuse| Check and confirm
The socket is not connected or plugged in properly| Connect to the power
supply and ensure the plug is plugged in thoroughly
Unfavorable connection of socket| Check whether the power socket is normal or
not
The power switch is not turned on| Turn on the power switch
The indicator light is on but there is no steam| The water in water tank does
not reach the designed water level| Fill water promptly
The water tank is not installed in position| Install the water tank in
position
Severe inflection of steam conduit| Straighten the steam conduit
Water don’t flow into boiler| Shaking water tank or re-placed the water tank
The accessories of ironing brush are not fastened| Unaligned grip| Realign and
fasten the snap close
Less, discontinuous or no steam| The water in water tank does not reach the
designed water level| Fill water promptly
The water tank is not installed in position| Install the water tank in
position
Severe inflection of steam conduit| Straighten the steam conduit
Less volume of steam| Blockage of filter sieve| Wash the clearing plug at
bottom
Blockage of water tank| Wash the filter sieve of water tank
Water don’t flow into boiler| Blockage of water intake| Wash the water intake
The water tank is not installed in position| Install the water tank in
position
Water tank deformation| Used hot water| Replace the water tank
Overflow of water tank| Cracking of water tank| Replace the water tank
Breakage of seal ring| Replace relevant fittings
If the problems above are still not solved, inform the professionals and do not dismantle the machine without authorization.
ENVIRONMENT
CAUTION: Do not dispose of this product as it has with other household products. There is a separation of this waste product into communities, you will need to inform your local authorities about the places where you can return this product. In fact, electrical and electronic products contain hazardous substances that have harmful effects on the environment or human health and should be recycled. The symbol here indicates that electrical and electronic equipment should be chosen carefully, a wheeled waste container is marked with a cross. Adeva SAS / H.Koenig Europe – 8 rue Marc Seguin, 77290 Mitry-Mory, France www.hkoenig.com – sav@hkoenig.com – contact@hkoenig.com – Tél: +33 1 64 67 00 05
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>