Montpellier MDWBID4553 Slimline 45cm Integrated Dishwasher Installation Guide

Montpellier MDWBID4553 Slimline 45cm Integrated Dishwasher

Specifications

• Model: Slimline 45cm Integrated Dishwasher MDWBID4553
• Brand: Montpellier

Installation & Operating Instructions
Please read these instructions carefully before attempting to install or use this appliance. We recommend that you keep these instructions in a safe place for future reference.

Welcome
Thank you for choosing this Montpellier appliance. Our appliances have been designed to provide you with the best combination of style, reliability, and performance, to give you years of trouble-free use. Please take the time to read these instructions carefully before installing or using your appliance to ensure that you get the most from your purchase.

• Visit our website: montpellier-appliances.com.

2 YEAR GUARANTEE
Your appliance is covered by a comprehensive two-year Parts & Labour Guarantee. In the unlikely event that you experience a problem with your appliance, you can rest assured that you are fully protected against the cost of repairs for the first 24 months. Please note that any claim must be accompanied by the model reference number, serial number, and proof of purchase.

Activating Your Guarantee
To activate your guarantee, you will need your product serial number. This can be found inside your appliance. Please keep a copy of your original sales invoice for any service call requirements.

Ways to Register Your Guarantee:

1. Online: Visit the Support page on our website and complete the online Product Registration form.
2. By Post: Fill in the form provided, attach a stamp, and send it in the post. Include your email address for confirmation.
3. By Phone: Contact our warranty registration department on 08081 961 388

User Manual Contents
This User Manual contains important safety information and instructions on the operation and maintenance of your appliance. Please take the time to read this User Manual before using your appliance and keep it for future reference. The design and specifications are subject to change without prior notice for product development.

Icon Key

voltage risk, Fire Warning, risk of fire / flammable materials
Caution| Injury or property damage risk is important Operating the system
correctly

Product Usage Instructions

1. Putting Your Safety First
2. General Safety Warnings: Follow all safety warnings provided in the manual.
3. Installation Warnings: Ensure proper installation following the guidelines.
4. During Usage: Use the appliance as instructed to prevent accidents.
5. Installation
6. Machine Positioning: Place the dishwasher in a suitable location.
7. Water Connection: Connect the water supply correctly.
8. Water Inlet Hose: Check and connect the water inlet hose securely.
9. Drain Hose: Ensure proper drainage by connecting the drain hose correctly.
10. Electrical Connection: Safely connect the appliance to the power source.
11. Specifications
12. General Appearance: Describes the overall look of the dishwasher.
13. Technical Specifications: Lists detailed technical information about the appliance.
14. Before Using the Appliance
15. Preparing Your Dishwasher For First Use: Initial setup instructions for first-time use.
16. Salt Usage: Information on using salt for better performance.
17. Fill the Salt: Instructions on filling up the salt compartment.
18. Test Strip: How to use the test strip provided with the appliance.
19. Water Hardness Table: Reference table for water hardness levels.
20. Water Softener System: Details about the water softener system if applicable.
21. Setting: Instructions on setting up the dishwasher for optimal performance.
22. Detergent Usage: Guidelines on using detergent for washing dishes.
23. Filling the Detergent: How to fill up the detergent dispenser.

Frequently Asked Questions (FAQ)

• Q: How often should I fill up the salt compartment?
  A: The frequency of filling salt depends on your usage and water hardness level. It is recommended to check and refill when necessary, typically every few weeks.

• Q: Can I use any type of detergent in this dishwasher?
  A: It is recommended to use only dishwasher-specific detergents for optimal cleaning results and to prevent damage to the appliance.

Welcome
Thank you for choosing this Montpellier appliance. Our appliances have been designed to provide you with the best combination of style, reliability, and performance, to give you years of trouble-free use. You may be familiar with a similar product, but please take the time to read these instructions carefully before installing or using your appliance to ensure that you get the most from your purchase.

• Thank you for choosing this product.
• This User Manual contains important safety information and instructions on the operation and maintenance of your appliance.
• Please take the time to read this User Manual before using your appliance and keep it for future reference.
• The design and specifications are subject to change without prior notice for product development.
• We recommend that you keep this manual in a safe place for future reference.
• Your appliance is covered by a comprehensive two-year Parts & Labour Guarantee. In the unlikely event that you experience a problem with your appliance, you can rest assured that you are fully protected against the cost of repairs for the first 24 months. Please note that any claim must be accompanied by the model reference number, serial number, and proof of purchase.
• To activate your guarantee, you will need your product serial number. This can be found inside your appliance.
• NB: Please make sure that you keep a copy of your original sales invoice as this will be needed if any service call is required.

There are three ways to register your Guarantee:

• Online: Visit the Support page on our website and complete the online Product Registration form. www.montpellier-appliances.com
• By Post: Simply detach and fill in the form provided, attach a stamp, and send it in the post. Don’t forget to include your e-mail address so that we can send confirmation through to you.
• By Phone: Contact our warranty registration department on 08081 961 388

Putting Your Safety First

Putting Your Safety First

General Safety Warnings
Read these instructions carefully before using your appliance and keep this manual for future reference.

• Please check the packaging of your machine before installation and the outer surface of the machine once the packaging has been removed. Do not operate the machine if it appears damaged or if the packaging has been opened.
• Packaging materials protect your machine from any damage that might occur during transportation. The packaging materials are environmentally friendly as they are recyclable. The use of recycled material reduces raw material consumption and decreases waste production.
• This appliance can be used by children aged 8 years and above and by persons with reduced physical, sensory, or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning the use of the appliance in a safe way and understand hazards involved. Children should not be allowed to play with the appliance. Remove packaging and keep it out of reach of children.
• Keep children away from detergents and rinse aids.
• There may be some residue left in the machine after washing. Keep children away from the machine when it is open.

Installation Warnings

• Choose a suitable and safe place to install your machine.
• Only original spare parts should be used with the machine.
• Unplug the machine before installation.
• Your machine must only be installed by an authorized service agent. Installation by anyone other than an authorized agent may cause your warranty to be void.
• Check that the indoor electrical fuse system is connected in line with safety regulations.
• All electrical connections must match the values on the rating plate.
• Ensure the machine does not stand on the electrical supply cable.
• Never use an extension cord or a multiple-socket connection.
• The plug should be accessible after the machine is installed.
• • After installation, run your machine unloaded for the first time checking the appliance runs a full cycle and has no leaks.
  • The machine must not be plugged in during positioning.
  • Always use the coated plug supplied with your machine.
  • If the electrical cable is damaged, it should only be replaced by a qualified electrician.
• Connect the hose directly to the water inlet tap. The pressure supplied by the tap should be a minimum of 0.03 MPa and a maximum of 1 MPa. If the pressure exceeds 1 MPa, a pressure relief valve must be fitted between the connection.

During Usage

• This machine is for domestic use only, do not use it for other purposes. Commercial use will void the guarantee.
  • Do not stand, sit, or place loads on the open door of the dishwasher.
  • Only use detergents and rinse-aids produced specifically for dishwashers. Our company is not responsible for any damage that may occur due to misuse.
  • Do not drink water from the machine.
  • Due to the danger of explosion, do not place any chemical dissolving agents into the machine’s washing section.
• Check the heat resistance of plastic items before washing them in the machine.
• Only put items in the machine that are suitable for dishwashing, and take care not to overfill the baskets.
• Do not open the door while the machine is in operation, hot water may spill out. Safety devices ensure the machine stops if the door is opened.
• The machine door should not be left open.
• It may cause accidents.
• Place knives and other sharp objects in the cutlery basket in a blade-down position.
• For models with the automatic door-opening system, when the EnergySave option is active, the door will open at the end of a program. To prevent damage to your dishwasher, do not attempt to close the door for one minute after it has opened. For effective drying, keep the door open for 30 minutes after a program has ended. Do not stand in front of the door after the auto-open signal sounds.
• In the case of a malfunction, repair should only be performed by an authorized service company, otherwise the warranty will be void.
• Before repair work, the machine should be disconnected from the mains. Do not pull the cable to unplug the machine. Switch off the water tap.
• Operation at a low voltage will cause a decline in performance levels.
• For safety, disconnect the plug once a program has finished.
• To avoid an electric shock, do not unplug the machine with wet hands.
• Pull the plug to disconnect the machine from the mains, never pull on the cord.

Recycling

• Some machine components and packaging consist of recyclable materials.
• Plastics are marked with the international abbreviations: ( >PE<, >PP<, etc.)
• The cardboard parts consist of recycled paper. They can be put into waste paper containers for recycling.
• Material unsuitable for domestic waste must be disposed of at recycling centers.
• Contact a relevant recycling center to obtain information about the disposal of different materials.

Packaging and the Environment

• Packaging materials protect your machine from damage that may occur during transportation.
• The packaging materials are environmentally friendly as they are recyclable. The use of recycled material reduces raw material consumption and therefore decreases waste production.

CE Declaration of Conformity
We declare that our products meet the applicable European Directives, Decisions, and Regulations and the requirements listed in the standards referenced.

Disposal of your old machine
The symbol on the product or its packaging indicates that this product may not be treated as household waste. Instead, it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of the product. For more detailed information about recycling this product, please contact your local city office, your household waste disposal service, or the shop where the product was purchased.

Installation

Machine Positioning

• When positioning the machine, place it in an area where dishes can be easily loaded and unloaded.
• Do not put the machine in an area where the ambient temperature falls below 0°C.
• Read all warnings located on the packaging before removing the packaging and positioning the machine.
• Place the machine close to a water tap and drain. Take into consideration that the connections will not be altered once the machine is in position.
• Do not hold the machine by its door or panel.
  • Ensure the water inlet and outlet hoses are not squeezed or trapped and that the machine does not stand on the electrical cable or any hoses while positioning.
• Adjust the feet so the machine is level and balanced.
• The machine should be placed on a flat solid surface otherwise it will be unstable and the door of the machine will not close properly.
• It’s not recommended to fit the dishwasher on any kind of carpet or carpet tiles.

Water Connection
We recommend fitting a filter to your water inlet supply to prevent damage to your machine due to contamination (sand, rust, etc.) from indoor plumbing. This will also help prevent yellowing and deposit formation after washing.

Note:
printing on the water inlet hose! If models are marked with 25°, the water temperature may be max. 25 °C (cold water).

Water Inlet Hose

• WARNING: Use the new water inlet hose supplied with your machine, do not use an old machine’s hose.
• WARNING: Run water through the new hose before connecting.
• WARNING: Connect the hose directly to the water inlet tap. The pressure supplied by the tap should be a minimum of 0.03 MPa and a maximum of 1 MPa. If the pressure exceeds 1 MPa, a pressure relief valve must be fitted between the connection.
• WARNING: After the connections are made, turn the tap on fully and check for water leaks at both the tap end and the dishwasher end. Always turn off the water inlet tap after the wash program has finished.

Drain Hose

Connect the water drain hose directly to the water drain hole or to the sink outlet spigot. This connection should be a minimum of 50 cm and a maximum of 110 cm from the floor where the dishwasher is placed.

IMPORTANT:
Items will not wash properly if a drain hose longer than 4m is used.

Electrical Connection

• WARNING: Your machine is set to operate at 220-240V. If the mains voltage supply to your machine is 110V, connect a transformer of 110/220V and 3000W between the electrical connection and the appliance.
• Connect the product to a grounded outlet protected by a fuse complying with the values in the “Technical Specifications table.
• The earthed plug of the machine must be connected to an earthed outlet supplied by suitable voltage and current.
• In the absence of earthing installation, an authorized electrician should carry out an earthing installation. In the case of use without earthing installed, we will not be responsible for any loss of use that may occur.
• The plug on this appliance will incorporate a 13A fuse.

Technical Specifications

Specification

General Appearance

1. Mug rack
2. Upper spray arm
3. Cutlery basket
4. Lower basket wheels
5. Detergent and rinse-aid dispenser
6. Upper basket
7. Upper basket track latch
8. Lower basket
9. Rating plate
10. Control panel
11. Salt dispenser
12. Filters (Antibacterial)
13. Lower spray arm
14. Mini Active Drying Unit: This system provides better drying performance for your dishes.

Before Using Your Appliance

Technical Specification

Dimensions (mm) Height

Width

Depth

|

820- 870

450

570

Operating voltage/frequency| 220-240V 50Hz
Total current| 10A
Total power| 1900W
Water supply pressure| Maximum 1Mpa Minimum 0.03Mpa

Preparing Your Dishwasher For First Use

• Make sure the electricity and supply water specifications match the values indicated in the installation instructions for the machine.
• Remove all packaging material inside the machine.
• Set the water softener level, after filling with salt.
• Set the rinse-aid level, after filling the rinse-aid compartment.

Salt Usage
For a good washing function, the dishwasher needs soft, i.e. less calcareous water. Otherwise, White lime residues will remain on the dishes and the interior equipment. This will negatively affect your machine’s washing, drying, and shining performance. When water flows through the softener system, the ions forming the hardness are removed from the water and the water reaches the softness required to obtain the best washing result. Depending on the level of hardness of the inflowing water, these ions that harden the water accumulate rapidly inside the softener system. Therefore, the softener system has to be refreshed so that it operates with the same performance during every wash. For this purpose, dishwasher salt is used. The dishwasher can only use special dishwasher salt to soften the water. Do not use any small-grained or powdered type of salts that are easily soluble (for example table salt). Using any other type of salt can damage your machine and will invalidate your guarantee.

• Only add water to the salt compartment before first use.
• Use softener salt specifically produced for use in dishwashers.
• When you start your dishwasher, the salt compartment is filled with water, therefore put the softener salt in before starting your machine (see below for filling instructions).
• If the softener salt has overflowed and you do not start the machine immediately, run a short washing program to protect your machine against corrosion.

Fill The Salt
To add softener salt,

1. Open the salt compartment cap by turning it counterclockwise.
2. Remove the salt cap.
3. Before first use, fill the compartment with 1 kg salt. If available, using a funnel will make filling easier.
4. Fill the container with water until it is almost overflowing. Replace the cap making sure it is secure and tight.

After every 20-30 Cycles, or when the re-fill light indicates, add salt into your machine until it fills up the container (approx. 1Kg).

Test Strip

NOTE:
The level is set to 3 as default. If the water is well water or has a hardness level above 90 dF, we recommend that you use filter and refinement devices.

Water Hardness Table

Level

| German dH| French dF| British dE|

Indicator

---|---|---|---|---
1| 0-5| 0- 9| 0 -6| P1- 9h LED’s are on
2| 6 -11| 10 – 20| 7-14| P2 – 9h LED’s are on
3| 12 -17| 21- 30| 15 – 21| 1/2 – 9h LED’s are on
4| 18-22| 31- 40| 22 – 28| 3h- 9h LED’s are on
5| 23-31| 41- 55| 29 -39| 6h-9h LED’s are on
6| 32-50| 56- 90| 40 -63| P1- 6h- 9h LED’s are on

Water Softener System
The dishwasher is equipped with a water softener which reduces the hardness of the mains water supply. To find out the hardness level of your tap water, contact your water company or use the test strip supplied.

Setting
To change the salt level, follow the below steps:

• Open the door of the machine.
• Turn on the machine, and press the Programme button as soon as the machine is turned on.
• Hold down the Programme button until all LEDs blink once.
• The machine will display the last setting.
• Set the level by pressing the Programme button.
• Switch off the machine to save the setting.

Detergent Usage

• Only use detergents specifically designed for domestic dishwashers. Keep your detergents in cool, dry places out of reach of children. Add the proper detergent for the selected program to ensure the best performance. The amount of detergent needed depends on the cycle, load size, and soil level of the dishes.
• Do not fill detergent into the detergent compartment more than required; otherwise, you can see whitish streaks or bluish layers on glass and dishes which may cause glass corrosion. Continued use of too much detergent may cause machine damage. Using little detergent can result in poor cleaning and you can see whitish streaks in hard water areas.
  • See the detergent manufacturer’s instructions for further information.

Filling The Detergent

• Push the latch which will cause the dispenser lid to slide upwards. Once fully open pour in the required amount of detergent.
• Close the lid by sliding it back over the detergent and press it until it locks in place.
• The dispenser should be refilled just before the start of each program.

Using Combined Detergents

• These products should be used according to the manufacturer’s instructions. Never put combined detergents into the interior section or the cutlery basket. Combined detergents contain not only the detergent but also rinse-aid, salt replacement substances, and additional components depending on the combination. We recommend you do not use combined detergents in short programs. Please use powder detergents instead.
• If you encounter problems when using combined detergents, please contact the detergent manufacturer.
• When using combined detergents, make sure that water hardness and rinse-aid settings are set to the correct level.
• If you stop using combined detergents make sure that the levels are adjusted accordingly.

Rinse-aid Usage

• The rinse-aid helps to dry the dishes without streaks and stains.
• Rinse-aid is required for stain-free utensils and clear glasses.
• The rinse aid is automatically released during the hot rinse phase.
• If the rinse-aid dosage setting is set too low, whitish stains may remain on dishes, and dishes do not dry or wash properly.
• If the rinse-aid dosage setting is set too high you can see bluish layers on glass, dishes, and the interior of the dishwasher.

Filling The Rinse And Setting
To fill the rinse-aid compartment, open the rinse-aid compartment cap. Fill the compartment with rinse-aid to the MAX level and then close the cap. Be careful not to overfill the rinse-aid compartment and wipe up any spills. If excessive amounts spill it is advisable to immediately run the Prewash cycle

To change the rinse-aid level, follow the below steps before turning on the machine:

• Open the door of the machine.
• Turn on the machine, and press the Programme button as soon as the machine is turned on.
• Hold down the Programme button until all LEDs blink twice. The rinse-aid setting follows the water hardness setting
• The machine will display the last setting.
• Change the level by pressing the program button.
• Switch off the machine to save the setting.

The factory setting is ’4’. If the dishes are not drying properly or are spotted, increase the level. If blue stains form on your dishes, decrease the level.

Level

| Dispensed Dose|

Indicator

---|---|---
1| Rinse-aid NOT dispensed| P1- 9h LED’s are on
2| 1 dose of rinse-aid dispensed| P2-9h LEDs are on
3| 2 doses of rinse-aid dispensed| 1/2-9h LED’s are on
4| 3 doses of rinse-aid dispensed| 3h- 9h LED’s are on
5| 4 doses of rinse-aid dispensed| 6h- 9h LED’s are on

Loading Your Dishwasher

• For best results, follow these loading guidelines.
• Loading the household dishwasher up to the capacity indicated by the manufacturer will contribute to energy and water savings.
• Manual pre-rinsing of tableware items leads to increased water and energy consumption and is not recommended.
• You can place cups, glasses, stemware, small plates, bowls, etc. in the upper basket.
• Do not lean long glasses against one another as they cannot remain steady and may be damaged.
• When placing long-stem glasses and goblets, lean them against the basket edge or rack and not against other items.
• Place all containers such as cups, glasses, bowls, and pots into the dishwasher with the opening facing downwards otherwise, water can collect in items which will affect the wash program.
• When placing cutlery into the cutlery basket you are recommended to use the cutlery grid to obtain the best result.
• Place all large (pots, pans, lids, plates, bowls, etc) and very dirty items in the lower rack.
• Dishes and cutlery should not be placed above each other.
  • WARNING: Take care not to obstruct the rotation of the spray arms.
  • WARNING: Make sure after loading, the dishes do not prevent the opening of the detergent dispenser.

Recommendations

• IMPORTANT: Remove any coarse residue on dishes before placing them inside the dishwasher. Always try and start the dishwasher with a full load as this will be the most efficient way to use the appliance.
• Do not overload the cutlery basket or place dishes in the wrong basket.
• WARNING: To avoid any possible injuries, place long-handle knives on the knife rack or horizontally on the baskets and sharp-pointed knives in the cutlery basket with their sharp points facing down.

Basket Adjustments

Upper Basket

Height Adjustment
Turn the Rail Stop Clips, at the ends of the rails, to the sides to open them (as shown in the image below), then pull out and remove the basket. Change the position of the wheels, then reinstall the basket to the rail, making sure to close the Rail Stop Clips. When the upper basket is in the higher position, large items such as pans can be placed on the lower basket.

Height Adjustable Mug Shelves

• The height-adjustable racks enable glasses and cups to be placed on or under the racks. The racks can be adjusted to 2 different heights (A, B).
• Cutlery and utensils can also be placed on the racks horizontally.

Alternative Basket Loads

Incorrect Loads
Incorrect loading can cause poor washing and drying performance. Please follow the manufacturer’s recommendations for good performance results.

Unsuitable Items For Dishwashing

• Cigarette ash, candle leftovers, polish, paint, chemical substances, iron-alloy materials.
• Forks, spoons, and knives with wooden, bone, ivory, or nacre-coated handles; glued items, items soiled with abrasive, acidic, or base chemicals.
• Temperature-sensitive plastics, copper or tin-coated containers.
• Aluminum and silver objects.
• Some delicate glasses, ornamental printed porcelains; some crystal items, adhered cutlery, lead crystal glasses, cutting boards, and synthetic fibered items.
• Absorbent items such as sponges or kitchen rugs.
  • IMPORTANT: In the future, purchase dishwasher- proof kitchenware.

Program

Programme Table

• The program duration may change according to the number of dishes, the water temperature, the ambient temperature, and selected additional functions.
• Values given for programs other than the eco-program are indicative only.
• The eco program is suitable for cleaning normally soiled tableware, that for this use, it is the most efficient program in terms of its combined energy and water consumption, and it is used to assess compliance with the EU eco-design legislation.
• Washing tableware in a household dishwasher usually consumes less energy and water in the use phase than hand dishwashing when the household dishwasher is used according to the manufacturer’s instructions.
• Only use powder detergent for short programs.
• Short programs do not include drying.
• To assist with drying, we recommend slightly opening the door after a cycle is complete.
• You can access the product database where the model information is stored by reading the QR code on the energy label.

NOTE:
According to regulations 1016/2010 and 1059/2010, Eco program energy consumption values may differ. This table is in line with regulations 2019/2022 and 2017/2022

The Control Panel

1. On/Off button
2. Program Selection Button
   • 2a. Programme LED’s
3. Option Button
   • 3a. Energy Save LED
   • 3b. Half Load LED
4. Delay Button
   • 4a. Delay LED’s
5. Salt Indicator
6. Rinse-aid Indicator
7. End of Programme Indicator

1. On/Off Button
   Switch the machine on by pressing the On/Off button. When the machine is on, the End Of Programme Indicator (7) will illuminate.

2. Program Selection Button
   Select a suitable program for your dishes by pressing the Programme Selection button. The Programme LED (2a) corresponding to the selected program will illuminate and the End Of Programme Indicator (7) will switch off. The program will start automatically when the door is closed.

3. Option Button
   Press the Option button once to activate the Energy Save option. Select the Energy Save option to enable the door of the machine to open at the end of the program to increase drying efficiency. This function also saves energy by operating at a lower temperature. The Energy Save LED ( 3a) will illuminate. Press the Option button twice to activate the Half Load option. Select the Half Load option to reduce the duration of the selected program, and therefore decrease the energy and water consumption. When the Half Load option is selected, the Half Load LED (3b) will illuminate. Press the Options button three times to activate the Energy Save and Half Load options together. Energy Save ( 3a) and Half Load (3b) LEDs will illuminate.

4. Delay Button
   Press the Delay button to delay the start time of a program for 3, 6, or 9 hours. Pressing once will delay the start time for 3 hours, pressing twice for 6 hours, and three times for 9 hours. Press the Delay Timer button to change or cancel the delayed start time. The Delay LED (4a) corresponding to the remaining delay duration ( 3h, 6h, 9h) will be on. If you switch off the machine after activating the delay time, the delay time is canceled.

   • NOTE: If you decide not to start the selected program, please see the “Changing a Programme” and “Cancelling a Programme” sections.
   • NOTE: When there is insufficient softening salt, the Salt Lack Warning Indicator (5) will illuminate to indicate the salt chamber needs filling.
   • NOTE: When there is insufficient rinse-aid, the Rinse-aid Lack Warning Indicator (6) will illuminate to indicate the rinse-aid chamber needs filling.

Select a Programme
Follow the steps below to select a program.

• Turn the machine on using the On/Off button.
• Select a program using the Programme Selection button. Press repeatedly until the desired program is illuminated.
• If desired select an appropriate program option with the Option button.
• Close the door to begin the cycle.

Changing a Programme
Follow the steps below to change a program while in operation.

• Open the door and select a new program using the Programme Selection button.
• After closing the door, the new program will resume the course of the old program.

NOTE:
Open the door slightly at first to stop a program before it is complete to avoid water spillage.

Cancelling a Programme
Follow the steps below to cancel a program while in operation.

• When the door of your machine is opened, the light corresponding to the most recently selected program will illuminate.
• Press and hold the Programme Selection button for 3 seconds. The End Of Programme Indicator will flash and the programme light will switch off.
• The water discharge process will start after the door of the machine is closed and will continue for 30 seconds. A buzzer will sound 5 times when a program is cancelled and the End Of Programme Indicator will illuminate.

Switching the Machine Off

• The End Of Programme Indicator will illuminate when a program is complete. A signal will also sound 5 times. You can then switch your machine off using the Power On/Off button.
• Disconnect the plug and turn off the water tap.
  • NOTE: Do not open the door before the program is complete.
  • NOTE: If the door of the machine is opened or the power is cut off while a program is in operation, the program will continue when the door is closed or the power returns.
  • NOTE: If the power is cut or the machine door is opened during the drying process, the program will terminate. Your machine will now be ready for a new program selection.

Buzzer Sound Control
To change the buzzer sound level, follow the below steps:

1. Open the door and press the Programme and Option (3) buttons simultaneously for 3 seconds.
2. When the sound setting is recognized buzzer gives a long sound and the machine will display the last set level, from “S0” to “S3”.
3. To decrease the sound level press the Programme (2) button. To increase the sound level, press the Option (3) button.
4. When the voice level corresponds to the LED shown below tab the le illuminates.

Voice Levels

|

LED’s

---|---
Energy Save| 1/2| 3h| 6h
S0|  |  |  | X
S1|  |  | X| X
S2|  | X| X| X
S3| X| X| X| X
5. To save the selected sound level, turn off the machine. ’’S0’’ level means all voices are off. Factory setting is “S3.

Save Power Mode
To activate or deactivate save power mode, follow the below steps:

1. Open the door and press Option (3) and Delay (4) buttons simultaneously for 3 seconds.
2. After 3 seconds, the machine will display the last setting.
3. When Save Power Mode is activated P1, P2, and Energy Save LEDs illuminate. In this mode, interior lights will turn off 4 minutes after the door is opened, and the machine will turn off after 15 minutes of no activity to save energy.
4. When Save Power Mode is deactivated P1, and P2 LEDs illuminate. If Save Power Mode is deactive, interior lights will be on as long as the door is open, and the machine will always be on unless it is turned off by the user.
5. To save the selected setting, turn off the machine. In a factory setting, Save Power Mode is active.

Cleaning and Maintenance

Cleaning your dishwasher is important to maintain the machine’s service life Make sure that the water softening setting is done correctly and the correct amount of detergent is used to prevent limescale accumulation. Refill the salt compartment when the salt sensor light comes on. Oil and limescale may build up in your Dishwasher over time. If this occurs:

• Fill the detergent compartment but do not load any dishes.
• Select a program that runs at high temperature and run the Dishwasher empty.
• If this does not clean your Dishwasher sufficiently, use a cleaning agent designed for use with dishwashers.
• To extend the life of your dishwasher, clean the appliance regularly, preferably each month.
• Wipe the door seals regularly with a damp cloth to remove any accumulated residue or foreign objects.

Filters
Clean the filters and spray arms at least once a week. If any food waste remains or foreign objects on the coarse and fine filters, remove them and clean them thoroughly with water.

• a) Micro Filter
• b) Coarse Filter
• c) Metal Filter
• To remove and clean the filter combination, turn it counterclockwise and remove it by lifting it upwards (1).
• Pull the coarse filter out of the microfilter (2).
• Then pull and remove the metal filter (3).
• Rinse the filter with lots of water until it is free of residue. Reassemble the filters. Replace the filter insert, and rotate it clockwise (4).
• Never use your dishwasher without a filter.
• Incorrect fitting of the filter will reduce the washing effectiveness.
• Clean filters are necessary for the proper running of the machine.

Spray Arms

• Make sure that the spray holes are not clogged and that no food waste or foreign objects are stuck to the spray arms.
• If there is any clogging, remove the spray arms and clean them under water.
• To remove the upper spray arm, undo the nut holding it in position by turning it clockwise and pulling it downwards.
• Make sure that the nut is properly tightened when refitting the upper spray arm.
• To remove the lower spray arm pull the arm upwards from the centre.

Drain Pump
Large food residues or foreign objects that were not captured by the filters may block the waste water pump. The rinsing water will then be above the filter.

Warning Risk of cuts!
When cleaning the wastewater pump, ensure that you do not injure yourself on pieces of broken glass or pointed implements.

In this case:

1. First always disconnect the appliance from the power supply.
2. Take out the baskets.
3. Remove the filters.
4. Scoop out water, use a sponge if required.
5. Check the area and remove any foreign objects.
6. Install filters.
7. Re-insert baskets.

Troubleshooting

Fault

| Possible Cause|

Troubleshooting

---|---|---

The program does not start

| Your Dishwasher is not plugged in| Plug your Dishwasher in
Your Dishwasher is not switched on| Switch your Dishwasher on

by pressing the On/Off button

Fuse blown| Check your indoor fuses
The water inlet tap is closed| Tum on the water inlet tap
Your Dishwasher door is open| Close the Dishwasher door
The water inlet hose and machine filters are clogged| Check the water inlet hose and machine filters and make sure they are not clogged

Water remains inside the machine

| The water drain hose is clogged or twisted| Check the drain hose, then either clean or untwist it
The filters are clogged| Clean the filters
The program is not finished yet| Wait until the program is finished

The machine stops during the washing

| Power failure| Check mains power
Water inlet failure| Check water tap
Shaking and hitting noises are

heard during a wash operation

| The spray arm is hitting the dishes in the lower basket| Move or remove items blocking the spray arm

Partial food waste remains on the dishes

| Dishes placed incorrectly, sprayed water not reaching affected dishes| Do not overload baskets
Dishes leaning against each other| Place dishes as instructed in the section on loading your dishwasher
Not enough detergent is used| Use the correct amount of detergent, as instructed in the program table
The wrong wash program selected| Use the information in the program table to select the most appropriate program
Spray arms clogged with food waste| Clean the holes in the spray arms with thin objects
Filters or water drain pump clogged or filter misplaced| Check the drain hose and filters are correctly fitted

Whitish stains remain on dishes

| Not enough detergent is used| Use the correct amount of detergent, as instructed in the program table
Rinse-aid dosage and/or water softener setting set too low| ****

Increase rinse-aid and/or water softener level

High water hardness level| Increase the water softener level and add salt
The salt compartment cap is not closed properly| Check the salt compartment cap is closed properly

Dishes do not dry

| The drying option is not selected| Select a program with a drying option
Rinse-aid dosage set too low| Increase rinse-aid dosage setting

Rust stains form on the dishes

| Stainless-steel quality of the dishes is insufficient| Use only dishwasher- proof sets
High level of salt in wash water| Adjust the water hardness level using the water hardness table
The salt compartment cap is not closed properly| Check that the salt compartment cap is closed properly
Too much salt spilled in the Dishwasher while filling it with salt| Use a funnel while filling salt to the compartment to avoid spillage
A poor mains grounding| Consult a qualified electrician immediately
Detergent remains in the detergent compartment| Detergent was added when the detergent compartment was wet| Make sure the detergent compartment is dry before use

Automatic Fault Warnings and What to Do

Trouble Code

|

Possible Fault

|

What to Do

---|---|---
P1| P2| 1/2| 3h| 6h
| | | | | Water inlet system failure| Make sure the water inlet tap is open and water is flowing
Separate the inlet hose from the tap and clean the filter of the hose
Contact for service if the error continues
| | | | | Pressure system failure| Contact for service
| | | | | Continuous water input| Close the tap and contact for service
| | | | | Inability to discharge water| Water discharge hoses and filters may be clogged
Cancel the program
If the error continues, contact for service
| | | | | Heater error| Contact for service
| | | | | Overflow| Unplug the machine and close the tap
Contact for service
| | | | | Overheating| Contact for service
| | | | | Faulty heater sensor| Contact for service
| | | | | High voltage failure| Contact for service
| | | | | Low voltage failure| Contact for service

• The installation and repair procedures should always carried out by the Authorised Service Agent to avoid possible risks. The manufacturer shall not be held liable for damages that may arise from procedures carried out by unauthorized persons. Repairs may be carried out by technicians only.
• If a component has to be replaced, ensure that only the original spare parts are used.
• Improper repairs or use of non-original spare parts may cause considerable damage and put the user at considerable risk.
• Contact information for your customer service can be found on the back of this document. Function-relevant genuine spare parts according to the corresponding Ecodesign order can be obtained from Customer Service for at least 10 years from the date on which your appliance was placed on the market within the European Economic Area.

Product Fiche

Product Information Sheet

• Commission delegated regulation (EU) 2019/2017 with regard to energy labeling of household dishwashers
• Montpellier Domestic Appliances Ltd. Unit 1, Tewkesbury Retail Park, Northway Lane, Tewkesbury, Gloucestershire. GL20 8JU
• (a) for the eco-program.

Here For You

After-sales assistance

• If you continue to experience problems with your appliance, please call the Montpellier customer service helpline on 01759 487839
• Please have all your product details available, including the model number, serial number, and original sales invoice (clearly showing the model number, date of purchase, and your retailer’s details) before registering a fault.
• The service call cannot progress without this information.

Your 2-year Manufacturer’s guarantee
THIS DOES NOT AFFECT YOUR STATUTORY RIGHTS.

• Your new Montpellier appliance carries a free guarantee which protects you against the cost of repairs during the first 24 months from the date of purchase provided that:
• Any claim is accompanied by evidence of the model reference, model serial number, and proof of purchase, such as a Sales Receipt, showing that the appliance was purchased within the 24 months before the date of claim.

What is not covered under the Guarantee

• Any appliance not correctly installed and operated according to the manufacturer’s instructions

• Any appliance that is used for anything other than domestic purposes.

• Any defect caused by accident, misuse, unauthorized modification, or inexpert repair.

• Cost of Call-out where a fault cannot be found with the appliance. Cost of Call-out for work covering routine maintenance, such as, but not exclusively, cleaning of filters or defrosting.

• Cost of Call-out for work required to correct
  the alignment of doors following door reversal procedures carried out by you. Use of the appliance by anyone other than the Householder. Use in any commercial environment.

• Consumable items, such as, but not exclusively, fuses in plugs, bulbs, and breakable items that require routine replacement. Repair costs incurred that have not been authorized by Montpellier service and/or carried out by a non-approved Montpellier engineer.

• Montpellier Appliances does not accept claims for consequential loss, rusting, corroding, delivery damage, or scratches.

YOUR GUARANTEE IS VALID ONLY IN THE UK & THE REPUBLIC OF IRELAND

• To register your appliance simply complete the card in your appliance pack and return it with a stamp affixed or you can register online at: montpellier-appliances.com/support.
• …or by phone, call our warrenty registration department on 08081 961 388

SERVICE HELPLINE

• Should your appliance develop a fault, please call the Montpellier customer service helpline on 01759 487 839
• Please remember to have all your product details available, including the model number, serial number, date of purchase, and your retailer’s details before registering a fault.

Montpellier Domestic Appliances Ltd.

• Unit 1, Tewkesbury Retail Park, Northway Lane, Tewkesbury, Gloucestershire GL20 8JU
• www.montpellier-appliances.com

The symbol on the product or its packaging indicates that this product may not be treated as household waste. Instead, it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product. For more detailed information about recycling this product, please contact your local city office, your household waste disposal service, or the shop where you purchased the product.

References

• Montpellier Appliances UK
• Support - Montpellier Domestic Appliances Ltd
• Montpellier Appliances UK

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>