Laney LFSUPER60-112 60w Guitar Combo Amplifier User Manual

Laney LFSUPER60-112 60w Guitar Combo Amplifier

Product Information

Introduction

• Thank you for purchasing your new Laney LIONHEART-FOUNDRY LFSUPER60-112 amplifier. This amplifier is part of the LIONHEART-FOUNDRY Series, which combines the power and response of tube amps into high-quality solid-state amplifiers that are practical and feature-laden.
• The LFSUPER60-112 amplifier is an ultra-compact, 60-watt combo designed for versatility in both recording and performance settings. It features dual channels, delivering a range of tones from clean to lead, enhanced with vintage tremolo and chorus effects.

Specifications

• Model: LFSUPER60-112
• Type: Solid-State Combo Amplifier
• Power: 60 Watts
• Channels: Dual Channel
• Effects: Vintage Style Tremolo and Chorus
• Country of Origin: United Kingdom

Features
The key features of the LFSUPER60-112 amplifier include:

• 60 watts of power
• Dual-channel operation
• Vintage-style tremolo and chorus effects
• Compact and portable design
• Designed by the Black Country Customs team in the UK

Product Usage Instructions

Controls
The amplifier has controls on both the front and back panels:

Front Panel Controls:

• Volume knobs for each channel
• Tone controls for adjusting bass, mid, and treble frequencies
• Gain control for adjusting the amount of distortion or overdrive
• Master volume control
• Effect controls for tremolo and chorus intensity

Back Panel Controls:

• Input jacks for instruments
• Speaker output jack
• Effects loop for connecting external effects pedals
• Footswitch input for channel switching

Usage Instructions:

1. Connect your guitar to the input jack on the back panel.
2. Turn on the amplifier using the power switch.
3. Adjust the volume, tone, gain, and master volume controls to achieve your desired sound.
4. Experiment with the tremolo and chorus effects to add depth to your tone.
5. For live performances, consider using a footswitch for easy channel switching.

Frequently Asked Questions

Q: Can I connect external speakers to the LFSUPER60-112 amplifier?

A: Yes, you can connect external speakers using the speaker output jack on the back panel.

Q: How do I access the effects loop on the amplifier?

A: The effects loop is located on the back panel of the amplifier. Simply connect your external effects pedals to the effects loop jacks.

Q: Is a footswitch included with the amplifier for channel switching?

A: A footswitch is not included with the amplifier but can be purchased separately for convenient channel switching during performances.

INTRODUCTION

• Thank you for purchasing your new Laney LIONHEART-FOUNDRY LFSUPER60-112 amplifier.
• The LIONHEART-FOUNDRY Series takes the power, dynamism, and response of our acclaimed LIONHEART tube amp range and forges them into creative, affordable, high-quality solid-state amplifiers that are practical, feature-laden, portable, and a lot of fun!
• Your LIONHEART-FOUNDRY LFSUPER60-112 amplifier was conceived, designed, and crafted by people who know and understand what musicians demand from their purchases.
• Every LIONHEART-FOUNDRY is designed and built with an attention to detail that is second to none. The LIONHEART-FOUNDRY gives you everything you need for a great guitar tone and nothing you don’t.
• The LIONHEART-FOUNDRY LFSUPER60-112 is an ultra-compact, analog all-rounder. Meticulously developed and proudly crafted by our Black Country Customs team, in the UK packed full of powerful recording and performance options.
• This simple-to-use, dual-channel 60-watt combo serves up creamy clean tones, right through to fiery lead tones that even its tube-driven cousins can’t match, all with built-in vintage style tremolo and chorus effects. You’ll feel instantly at home playing Pop through to blistering Rock on this incredibly versatile amp.
• And, just like all our FOUNDRY amps, we’ve made it feel like you’re playing a tube amp too. All in a package that is easy to carry and designed to be with you from the practice room to the stage!
• Great tone is everything and the LIONHEART-FOUNDRY Series is everything you need and nothing you don’t!
• For more information about the complete range of Laney amplifiers please visit our website www.laney.co.uk.

FEATURES

• High and Low power modes (60W or Low Power <1W bedroom mode)
• Built-in foot-switchable Pre-Boost with level
• Two Independent Channels with foot-switchable control designed from the ground up to replicate the Tone AND feel of the Lionheart tube series
• Clean Channel with Bright Switch
• Drive Channel with Gain, Volume, and switchable Bright, Natural, and Dark voicing
• 3 Band passive tone stack and Tone control
• Digital Reverb with foot-switchable control
• Tremolo and Chorus, with rate and depth controls. (foot-switchable)
• LA∙IR High-Quality Digital IR emulated balanced XLR Out with selectable 1×12 or 4×12 IR and ground lift switch.
• HH H1260 Loudspeaker
• 6.3mm FX Loop (FX Send doubles as an unemulated line out)
• 3.5mm Stereo Aux In and 3.5mm Stereo Headphone Output (With Cabinet Emulation)

CONTROLS

FRONT PANEL

1. INPUT SOCKET
   6.3mm jack socket for the main audio signal input.

2. BOOST CONTROL
   Pre-channel boost control with an on/off switch.

3. CHANNEL 1 + 2 CONTROLS
   Individual controls for channels 1+2 with a tone switch for each as well as the channel select switch.

4. EQ TONE STACK
   3-tone EQ stack to tweak the bass, middle, and treble. Passive controls that always sound musical in any setting.

5. TONE + REVERB
   Tone control to control the top-end response of your signal. Reverb control for the built-in reverb effect.

6. EFFECTS CONTROLS
   Choose between tremolo and our Spiral chorus effects. Use the rate and depth to vary the sound of the selected effect.
   BACK PANEL

7. POWER SWITCH
   Main power switch for the unit.

8. POWER SOCKET
   Universal IEC input socket to connect the provided mains inlet.

9. AMP POWER CONTROL
   Switch the power output of the amplifier between full power and <1W for quiet playing.

10. REMOTE SWITCH SOCKETS
    Footswitch sockets to control reverb, effect, boost, and channel selection.

11. FX LOOP
    FX return and send to connect to your effects pedals. The FX send can also be used as a standard line-level output.

12. AUX IN + HEADPHONES OUT
    3.5mm aux input socket to add a backing track to your mix. 3.5mm headphones socket for silent playing – will mute the amplifier with a jack connected.

13. DI OUT
    XLR line level DI out socket with built-in emulation for 1×12 and 4×12 cabs. Ground lift switch to potentially resolve ground hum issues.

HOW TO CONNECT THE LFSUPER60-112

ONBOARD LOUDSPEAKER WITH FX LOOP
Simply connect your guitar to the input socket via a 6.3mm jack and you’re ready to play. To incorporate your effects pedalboard, plug the input and output to the FX send/return sockets respectively.

USING THE DI OUT
The high-quality speaker-emulated DI out, with IRs preloaded, can be connected to any balanced/unbalanced line level input device such as a PA or audio interface to a DAW. Toggle the cabinet emulation off should you want to use your own.

AUX IN AND HEADPHONES OUT
Connect your backing track via the 3.5mm aux in from any media player device such as a mobile phone. This will play out of the onboard loudspeaker along with your guitar track. Alternatively, for silent practice, plug in a pair of headphones to the 3.5mm phone out socket to have your guitar and backing track play through them with the onboard loudspeaker muted.

Additionally, the phones also include cabinet emulation, following the IR emulation switch.

FOOTSWITCH CONNECTIONS

• The two remote sockets on the LFSUPER60-112 can be connected to two FS-2 Minis to allow for remote control of the reverb, effect select, boost and channel select.
• The left socket should connect to an FS-2, where the jack’s tip signal will toggle the reverb and the jack’s ring signal will switch the active effect between tremolo and Spiral chorus.
• The right socket should connect to an FS-2, where the jack’s tip signal will toggle the boost on/off and the jack’s ring signal will switch between channels 1 and 2.

EXAMPLE SETTINGS

While the EQ on the LFSUPER60-112 is designed to always sound musical, here are a few starters to help you find some familiar tones:

SPECIFICATIONS

switch (Clean Channel) and Tone character Switch (Drive Channel)

Effects| Digital Springline Reverb (Footswitchable). Tremolo and Chorus, with rate and

depth controls (Footswitchable), External FX Loop

Controls| Pre-Boost, Clean Volume, Clean Bright Switch, Channel Switch, Drive Gain, Drive Volume, Drive Tone Character (Normal, Bright, Dark), Bass, Middle,

Treble, Reverb, Tremolo or Chorus Switch, Rate, Depth.

Indicators| LEDs for Boost, Channel 1, Channel 2, and Modulation Effects.
Inputs| 6.3mm (1/4″) Mono Instrument Input Jack, 6.3mm FX Return jack, 3.5mm

stereo aux in jack

Outputs| 6.3mm FX Send (Doubles as Line Out), 3.5mm stereo headphone jack, Balanced Male XLR DI out with LA.IR Speaker Emulated Digital Impulse

Response with high-quality 1×12 and 4×12 options.

Loudspeaker| HH H1260 8 Ohm Loudspeaker
Power Supply| Internal SMPSU 100-240V~ Universal Voltage 50/60Hz. IEC C14 Inlet
Typical Power Consumption| 72W
Unit dimensions (HWD)| 448 x 485 x 260mm, (17.6″ x 19.1″ x 10.2″)
Unit weight| 11.8Kg, (26 lbs)
Carton dimensions (HWD)| 505 x 565 x 335mm, (19.9″ x 22.2″ x 13.2″) , 0.096 M3
Packed Weight| 14Kg, (30.9 lbs)
EAN Code (Single)| 5060109458886

DIMENSIONS

DIMENSIONS (in mm)

SAFETY AND WARNINGS

To take full advantage of your new product and enjoy long and trouble-free performance, please read this owner’s manual carefully, and keep it in a safe place for future reference.

1. Unpacking: On unpacking your product please check carefully for any signs of damage that may have occurred whilst in transit from the Laney factory to your dealer. In the unlikely event that there has been damage, please re-pack your unit in its original carton and consult your dealer. We strongly advise you to keep your original transit carton, since in the unlikely event that your unit should develop a fault, you will be able to return it to your dealer for rectification securely packed.
2. Amplifier Connection: To avoid damage, Generally it is advisable to establish and follow a pattern for turning on and off your system. With all system parts connected, turn on source equipment, mixers, effects processors, etc, BEFORE turning on your amplifier. Many products have large transient surges at turn on and off which can cause damage to your speakers. By turning on your amplifier LAST and making sure its level of control is set to a minimum, any transients from other equipment should not reach your loudspeakers. Wait till all system parts have stabilized, usually a couple of seconds. Similarly when turning off your system always turn down the level controls on your amplifier and then turn off its power before turning off other equipment.
3. Cables: Never use shielded or microphone cables for any speaker connections as this will not be substantial enough to handle the amplifier load and could cause damage to your complete system. Use good quality shielded cables everywhere else.
4. Servicing: The user should not attempt to service these products. Refer all servicing to qualified service personnel.
5. Heed all warnings.
6. Follow all instructions.
7. Do not use this apparatus near water.
8. Clean only with a dry cloth.
9. Do not block any of the ventilation openings. Install by manufacturer’s instructions.
10. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
11. An apparatus with Class I construction shall be connected to a main socket outlet with a protective connection. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades one wider than the other. A grounding-type plug has two blades and a third grounding prong. The wide blade or third prong is provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for the replacement of the obsolete outlet.
12. Protect the power cord from being walked on or pinched, particularly at plugs, convenience receptacles, and the point they exit from the apparatus.
13. Only use attachments/accessories provided by the manufacturer.
14. Use only with a cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.
15. The mains plug or an appliance coupler is used as the disconnect device and shall remain readily operable. The user should allow easy access to any mains plug, mains coupler, and mains switch used in conjunction with this unit thus making it readily operable. Unplug this apparatus during lightning storms or when unused for long periods.
16. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as when the power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
17. Never break off the ground pin. Connect only to a power supply of the type marked on the unit adjacent to the power supply cord.
18. If this product is to be mounted in an equipment rack, rear support should be provided.
19. Note for UK only: If the colors of the wires in the mains lead of this unit do not correspond with the terminals in your plug‚ proceed as follows:
    • The wire that is colored green and yellow must be connected to the terminal that is marked by the letter E‚ the earth symbol‚ colored green or colored green and yellow.
    • The wire that is colored blue must be connected to the terminal that is marked with the letter N or the color black.
    • The wire that is colored brown must be connected to the terminal that is marked with the letter L or the color red.
20. This electrical apparatus should not be exposed to dripping or splashing and care should be taken not to place objects containing liquids, such as vases, upon the apparatus.
21. Exposure to extremely high noise levels may cause permanent hearing loss. Individuals vary considerably in susceptibility to noise-induced hearing loss, but nearly everyone will lose some hearing if exposed to sufficiently intense noise for a sufficient time. The U.S. Government’s Occupational Safety and Health Administration (OSHA) has specified the following permissible noise level exposures: According to OSHA, any exposure over the above permissible limits could result in some hearing loss. Earplugs or protectors to the ear canals or over the ears must be worn when operating this amplification system to prevent permanent hearing loss if exposure is more than the limits set forth above. To ensure against potentially dangerous exposure to high sound pressure levels, it is recommended that all persons exposed to equipment capable of producing high sound pressure levels such as this amplification system be protected by hearing protectors while this unit is in operation.
22. If your appliance features a tilting mechanism or a kickback-style cabinet, please use this design feature with caution. Due to the ease with which the amplifier can be moved between straight and tilted back positions, only use the amplifier on a level, stable surface. DO NOT operate the amplifier on a desk, table, shelf, or otherwise unsuitable non-stable platform.
23. Symbols & nomenclature used on the product and in the product manuals, intended to alert the operator to areas where extra caution may be necessary, are as follows:

| Intended to alert the user to the presence of uninsulated ‘Dangerous Voltage’ within the product’s enclosure that may be sufficient to constitute a risk of electrical shock to persons.
---|---
| Intended to alert the user of the presence of important operating and maintenance (Servicing) instructions in the literature accompanying the product.
CAUTION:
Risk of electrical shock – DO NOT OPEN. To reduce the risk of electrical shock, do not remove the cover. No user-serviceable parts inside. Refer servicing to qualified personnel.
WARNING:
To prevent electrical shock or fire hazards, do not expose this appliance to rain or moisture. Before using this appliance please read the operating instructions for further warnings.
| This device complies with Part 15 of the FCC rules Operation is subject to the following two conditions:

1)    This device may not cause harmful interference

2)    This device must accept any interference received, that may cause undesired operation.

Warning: Changes or modifications to the equipment not approved by Laney can void the user’s authority to use the equipment.

Note: This equipment has been tested and found to comply with the limits for Class B digital devices, under Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and if not installed and used under the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try and correct the interference by one or more of the following measures. Reorient or relocate the receiving antenna. Increase the separation between the equipment and the receiver. Connect the equipment to an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help.

| This product conforms to the requirements of the following European Regulations, Directives & Rules: CE Mark (93/68/EEC), Low Voltage (2014/35/EU), EMC (2014/30/EU), RoHS (2011/65/EU), ErP (2009/125/EU)

SIMPLIFIED EU DECLARATION OF CONFORMITY
Hereby, Laney Electronics Ltd. declares that the radio equipment complies with Directives 2014/53/EU, 2011/65/EU, and 2009/125/EU. Full text of the EU declaration of conformity is available at the following internet address: http://support.laney.co.uk/approvals.

| The object of the declaration described above conforms with the relevant statutory requirements of Electrical Equipment (Safety) Regulations 2016, Electromagnetic Compatibility Regulations 2016, The Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment Regulations 2012, The Ecodesign for Energy-Related Products and Energy Information, (Amendment) (EU Exit) Regulations 2012
| To reduce environmental damage, at the end of its useful life, this product must not be disposed of along with normal household waste at landfill sites. It must be taken to an approved recycling center according to the recommendations of the WEEE (Waste Electrical and Electronic Equipment) directive applicable in your country.

STEELPARK ROAD, COOMBSWOOD BUSINESS PARK WEST, HALESOWEN, B62 8HD. UK FOR THE LATEST INFORMATION PLEASE VISIT WWW.LANEY.CO.UK. IN THE INTEREST OF CONTINUED DEVELOPMENT, LANEY RESERVES THE RIGHT TO AMEND PRODUCT SPECIFICATION WITHOUT PRIOR NOTIFICATION.

References

• Laney Amplification - Since 1967
• Laney Amplification - Since 1967

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>