SANUS BMF320 TV Mount Instruction Manual
- July 9, 2024
- SANUS
Table of Contents
BMF320
INSTRUCTION MANUAL
GET IT RIGHT
THE FIRST TIME
Follow this step-by-step instruction manual to speed up your installation.
WE’RE HERE TO HELP
| |
---|---|---
Want to watch a video that shows how easy this DIY project will be?| Get it
right the first time.
HeightFinder™ shows you where to drill.| Our US-based install experts are
standing by to help.
Watch it now at: SANUS.com/2782| Check it out
at: SANUS.com/1172| Call us at:
800-359-5520
Or, chat at: SANUS.com/chatSP
IMPORTANT SAFETY INSTRUCTIONS
– PLEASE READ MANUAL PRIOR TO USE –
SAVE THESE INSTRUCTIONS
Please read through these instructions completely to be sure you’re
comfortable with this easy install process.
Check your TV owner’s manual to see if there are any special requirements for
mounting your TV.
If you do not understand these instructions or have doubts about the safety of
the installation, assembly or use of this product, contact Customer Service
1-800-359-5520.
CAUTION: Avoid potential personal injuries and property damage!
-
This product is designed ONLY to be installed into wood studs, solid concrete or concrete block.
— DO NOT INSTALL INTO DRYWALL ALONE — DRYWALL ALONE WILL NOT HOLD THE WEIGHT OF YOUR TV. -
This product is designed for INDOOR USE ONLY.
-
The wall must be capable of supporting five times the weight of the TV and mount combined.
-
Do not use this product for any purpose not explicitly specified by manufacturer.
-
Manufacturer is not responsible for damage or injury caused by incorrect assembly or use.
TV Weight Limit
(including accessories)
DO NOT EXCEED
If your TV (including accessories) exceeds this weight, this mount is NOT
compatible.
Visit SANUS.com or call customer service to find a
compatible mount.
1-800-359-5520
Wall Construction
ONLY install on these acceptable wall types.
Unsure
Call Customer Service
1-800-359-5520
CAUTION:
DO NOT install in drywall alone
Drywall alone will NOT hold the weight of your TV.
Tools Needed
Dimensions
BEFORE YOU BEGIN
Remove the stand
from your TV — if attached.
Install any accessories
you may have purchased, if they requireTV removal prior to assembly.
The TV is removable for future accessory purchases.
Protect the face
of your TV when laying it down for installation.
Supplied Parts and Hardware
WARNING: This product contains small items that could be a choking hazard
if swallowed. Before starting assembly, verify all parts are included and
undamaged. If any parts are missing or damaged, do not return the damaged item
to your dealer; contact Customer Service. Never use damaged parts!
NOTE: Not all hardware included will be used.
STEP 1 Parts and Hardware
STEP 1 Attach TV Bracket to TV
1.1 Select TV Screw Diameter
Only one screw size fits your TV.
NOTE: If your TV included inset spacers or adapters, use them UNDER the mount hardware.
1.2 Select TV Screw Length and Spacers
A NO SPACER
• Flat Back TV
[TV bracket s lay flat on your TV]
Use short TV screws 01.
Spacers 03 not needed.|
---|---
B SPACER NEEDED
- Flat Back TV with extra space needed [for deep inset holes or cable interference]
- Rounded or Irregular Back TV [TV brackets NOT resting flat on your TV]
Use long TV screws 01 and spacers 03 to create extra space between the TV and
TV bracket.|
---|---
CAUTION: Verify adequate thread engagement with your screw 01 , washer 02
, spacer 03 combination AND TV bracket 06 .
— Too short will not hold your TV. — Too long will damage your TV.
1.3 Attach TV Brackets to Your TV
Measure the WIDTH and HEIGHT of your TV’s mounting hole pattern.
Adjust mounting tabs M on TV brackets 06 to match the width W of your TV’s mounting hole pattern.
For hole pattern height H 200 mm and less, align horizontal TV brackets 06
with mounting tabs M to the inside.
For hole pattern height H greater than 200 mm, align horizontal TV brackets 06
with mounting tabs M to the outside.
Adjust TV brackets 06 to align with your TV hole pattern. Install using the screw 01 /washer 02 /spacer 03 combination you selected for your TV.
TV bracket 04 must be centered on your TV, but can be offset up or down to avoid cable interference.
Secure the TV brackets using four interface screws 05 , starting with the top two screws in the notches shown.
Securely tighten the screws from STEP 4 and STEP 6.
STEP 2 Attach Wall Plate to Wall
WARNING: This product contains small items that could be a choking hazard
if swallowed. Before starting assembly, verify all parts are included and
undamaged. If any parts are missing or damaged, do not return the damaged item
to your dealer; contact Customer Service.
Never use damaged parts!
NOTE: Not all hardware included will be used.
Parts and Hardware for STEP 2
| For WOOD STUD INSTALLATIONS| Follow 2A on PAGE 8
---|---|---
| For CONCRETE INSTALLATIONS| Follow 2B on PAGE 9
STEP 2A Attach Wall Plate Wood Stud Installation
CAUTION: Avoid potential personal injury or property damage!
- Drywall covering the wall must not exceed 5/8 in. (1.5 cm)
- Minimum wood stud size: nominal 2 x 4 in. (5.1 x 10.2 cm) actual 1 ½ x 3 ½ in. (3.8 x 8.9 cm)
- Stud center must be verified
STEP 2B Attach Wall Plate Solid Concrete or Concrete Block Installation
CAUTION: Avoid potential personal injury or property damage!
- Mount the arm assembly 08 directly onto the concrete surface (no surface covering)
- Minimum solid concrete thickness: 8 in. (20.3 cm)
- Minimum concrete block size: 8 x 8 x 16 in. (20.3 x 20.3 x 40.6 cm)
STEP 3 Attach TV to Wall Plate
WARNING: Before starting assembly, verify this part is undamaged. If
damaged, do not return the damaged item to your dealer; contact Customer
Service. Never use damaged parts!
NOTE: TV shifts 2.4 in. (6.2 cm) to the right or left when in the home
position. Consider this when selecting the location of your wall mount.
Parts and Hardware for STEP 3
Hang the TV onto the arm assembly 08 by hooking the top support on TV bracket 04 as shown.
CAUTION: Avoid potential personal injury or property damage!
Always make sure your securement screw 12 is tightened, so the TV is securely
fastened to the arm assembly 08 .
Press the bottom of the TV into the arm assembly 08 until you hearthe lock
click, securing the TV in place.
To lock the TV onto arm assembly 08 , install the securement screw 12 on the
vertical TV bracket 04 using hex key 14.
Manage Cables
IMPORTANT:
Pull arm 08 to its full extension, to leave enough slack and prevent
stretching the cables when the arms are moved.
Remove the cable covers C from the arm 08 by sliding to unlock.
Route the cables along the arm.
Reattach cable covers to capture the cables.
Adjustments
CAUTION: Screw 12 MUST be loosened before STEP 2.
- Loosen screw 12.
- Level your TV with screw .
- Tighten screw 12.
NOTE:
If you do not intend to adjust the tilt for different viewing locations, you
can tighten the tilt tension knobs T , to prevent unwanted movement. If
needed, use hex key 14 to tighten more firmly.
Your TV should adjust easily when moved, then stay in place.
Adjust the tilt tension knobs T if your TV naturally tilts up or down.
CAUTION: Avoid potential personal injury or property damage! DO NOT
remove screws , only turn enough for slight adjustment.
ONLY If needed, adjust the arm tension when you extend or retract your TV,
with screw using hex key 13 .
REMOVE THE TV
HEAVY! You may need assistance with this step.
- Disconnect all cables from the TV.
- Remove securement screw 12.
- Pull down on the release cord R to release the TV.
- Carefully lift the TV from arm assembly 08 .
Thank you for choosing SANUS Elite!
Please take a moment to let us know how we did:
| Call us at: US: 800-359-5520| |
info@legrand.com
---|---|---|---
| Or, chat at: US: SANUS.com/chatSP| |
SANUS.com
Legrand AV Inc. and its affiliated corporations and subsidiaries (collectively, “Legrand”), intend to make this manual accurate and complete. However, Legrand makes no claim that the information contained herein covers all details, conditions, or variations. Nor does it provide for every possible contingency in connection with the installation or use of this product. The information contained in this document is subject to change without notice or obligation of any kind. Legrand makes no representation of warranty, expressed or implied, regarding the information contained herein. Legrand assumes no responsibility for accuracy, completeness or sufficiency of the information contained in this document.
©2022 Legrand AV Inc. All rights reserved. SANUS is a brand of Legrand. SANUS
and the SANUS logo are registered trademarks of Legrand.
Legrand AV Inc. • 6436 City West Parkway • Eden Prairie, MN 55344 USA
6901-603077 00
Documents / Resources
|
SANUS BMF320 TV
Mount
[pdf] Instruction Manual
BMF320, BMF320 TV Mount, BMF320 Mount, TV Mount, Mount
---|---
References
- SANUS | #1 Brand of TV Wall Mounts in the U.S.
- HeightFinder | SANUS
- SANUS | #1 Brand of TV Wall Mounts in the U.S.
- HeightFinder | SANUS
- HeightFinder | SANUS
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>