Jouncer BS702 Big Wireless Speaker User Manual

Jouncer BS702 Big Wireless Speaker

Product Information

Specifications

• Speaker Type: Bluetooth wireless speaker
• Speaker System: Stereo
• Dimensions: 293 x 105 x 198mm
• Weight: 3.3kg
• Driver: 5.25inch x 1, 2.5inch x 2
• Audio Playtime: Approximately 7 hours (@50-60% Volume)
• Bluetooth Version: V5.1
• Rated Power : 80W
• Power Supply : Built-in 15600mAh Battery
• Charging Time: Approximately 3 hours (USB C)
• Frequency Response Range : 100-20KHZ
• Input Power: DC 20V/3A
• Built-in Microphone: Yes

Product Usage Instructions

What’s in the box

• Speaker with hook 1pc
  • power adapter&Line-in cable 1pc
• User manual 1pc
  • Shoulder belt 1pcs

Key functions

1. Power On/OFF: Press and Hold for 3 seconds
2. Battery Capacity LED indicators
3. Power ON/OFF LED lights of subwoofers: Press 1 ?me On/OFF
4. EQ switch Press 1 time to switch EQ)
5. Red light: super bass mold white light: surround sound no light:pop music
6. Press and hold: Active voice assistant
7. Phone calls(Receive/reject/redial)
8. Press 1 me: receive/end a phone call
9. Press and hold: reject phone call
10. Press 2 times: Redial
11. TWS connection
12. Press 1 time to active TWS mode, Press again to quit TWS mode
13. Volume-/Previous track
14. Volume – : Press 1 time：
15. Previous track: Press and hold
16. Pause/Play/Pairing model
17. Press 1 time: Pause/Play
18. Press and hold(3 seconds): Pairing mode
19. Volume+/Next track
20. Volume +: Press 1 time
21. Next song: Press and hold
22. Line -in
23. No Function
24. TF card
25. TV socket
26. In-Line microphone(guitar socket)
27. USB card
28. No Function
29. Charging socket

Turning On the Speaker
Turn on the speaker to hear the boot-up sound.

Bluetooth Connection
After opening the phone’s Bluetooth settings, click on “Jouncer” to pair the speaker with your device.

1. Turn on the speaker, you will hear the boot
2. After open the phone Bluetooth, Click the “Jouncer” to pairing

Notes:

1. If the speaker is not paired for 15 minutes after booting up, it will shut down automatically.
2. If Apple users find the volume low, adjust the setting on the phone: Settings > Sounds & Haptics > Headphone Safety > Reduce Loud Sounds.

Notes:

1. If it is not paired for 15 minutes after booting, it will shut down. When low battery,you can hear the prompt tone then the speaker will power off automatically
2. If Apple users feel that the volume is low, you can turn off this setting on the phone(Settings-Sounds & Haptcs-Headphone Safety-Reduce Loud Sounds)

Safety Instructions

1. Keep the product away from extremely hot and cold environments, it will damage the battery and circuit.
2. Avoid liquid immersion into the product.
3. Do not disassemble the product.
4. Do not use concentrated chemical products or detergents to clean the product.
5. Use only 5V/1A power supply. Connecting the power supply voltage too high may cause serious damage.
6. Do not randomly discard or place the product near fire or high temperature to avoid the danger of explosion.

**FCC statement

**

This device complies with part 15 of the FCC Rules.

Operation is subject to the following two conditions:

1. this device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules

These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interterence by one or more of the following measures:

1. Reorient or relocate the receiving antenna.
2. Increase the separation between the equipment and receiver.
3. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
4. Consult the dealer or an experienced radio/TV technician for help.

The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction

FAQ

Q: How do I pair the speaker with my device?
A: Turn on the speaker and access your phone’s Bluetooth settings. Click on “Jouncer” to initiate the pairing process.

Q: What should I do if the speaker shuts down after 15 minutes?
A: If the speaker is not paired within 15 minutes of booting up, it will automatically shut down. Simply turn it back on and repeat the pairing process.

Q: How can I improve the volume on my Apple device?
A: Apple users can adjust the volume settings on their phones by navigating to Settings > Sounds & Haptics > Headphone Safety and then selecting “Reduce Loud Sounds.”

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>