GIGABYTE GB-AMSR9N8I-20A1 Aorus Model S Gaming Desktop PC User Manual
- June 6, 2024
- Gigabyte
Table of Contents
GIGABYTE GB-AMSR9N8I-20A1 Aorus Model S Gaming Desktop PC User Manual
For more product details, please visit GIGABYTE’s website.
To
reduce the impacts on global warming, the packaging materials of this product
are recyclable and reusable. GIGABYTE works with you to protect the
environment.
Copyright
© 2021 GIGA-BYTE TECHNOLOGY CO., LTD. All rights reserved.
The trademarks mentioned in this manual are legally registered to their
respective owners.
Disclaimer
Information in this manual is protected by copyright laws and is the property of GIGABYTE. Changes to the specifications and features in this manual may be made by GIGABYTE without prior notice.
No part of this manual may be reproduced, copied, translated, transmitted, or published in any form or by any means without GIGABYTE’s prior written permission.
Documentation Classifications
In order to assist in the use of this product, GIGABYTE provides the following types of documentations:
- For quick set-up of the product, read the Quick Startup Guide included with the product.
- For detailed product information, carefully read the User’s Manual.
For product-related information, check on our website at: https://www.gigabyte.com
Box Contents
- AORUS MODEL S GAMING DESKTOP PC
- Quick Start Guide
- Antennas
- Power cord
Hardware Installation
Safety Information
- Before connecting to the power outlet, make sure that the voltage rating of the power cable is compatible with the power specification in the country where you are located.
- The power cord plug must be connected to a properly wired and grounded power outlet.
- Be sure that the power outlet you plug the power cord into is easily accessible and located as close to the equipment operator as possible. When you need to disconnect power to the equipment, be sure to unplug the power cord from the electrical outlet.
- Do not touch the plug with wet hands, otherwise easily cause electric shock.
- Protect the power cord from being tread upon or pinched, particularly at the plug.
- To avoid damage of internal component, do not place the product on a vibrating surface.
- Operating temperature: 5~35o C.
- Do not place the product near any heat sources such as electric radiators, heat registers, stoves or other devices (including amplifiers) that produce heat.
- Do not place the product in a confined space; make sure to use it in a well-ventilated place.
- The holes or openings on this product are for ventilation to ensure reliable operation of the product and to protect it from overheating. Do not cover or block the ventilation holes with any objects.
- Never push objects of any kind into this product through cabinet slots as they may touch dangerous voltage points or short-out parts that could result in a fire or electric shock. Never spill liquid of any kind onto or into the product.
- Do not use this product near water, drinks, or all types of liquids. Do not expose this apparatus to rain, liquid or moisture. Failure to do so may result in electric shock or damage. This product is not water proof or oil-proof.
- Clean the equipment with a soft, dry cloth.
- The manufacturer specifies that the thumbscrews normally should be tightened with a screwdriver, use of thumbscrews is not considered to compromise the basic principles of safety associated with the Safety Standard.
- Warning! Danger of explosion if the battery is replaced with an incorrect model. Refer to the manufacturer’s instruction manual to handle the used battery.
- Do not remove the casing of this product to avoid causing safety issues. Do not make mechanical or electrical modifications to the equipment to avoid causing safety issues.
Hardware Information
System Overview
Front View
-
(a) Power Button
The power button allows users to turn on/off the computer -
(b) USB 3.2 Gen 1 Port
The USB 3.2 Gen 1 port supports the USB 3.2 Gen 1 specification and is compatible to the USB 2.0 specification. Use this port for USB devices. -
(c) Audio/Microphone Jack
The line out/Mic in jack.
Back View-A
DisplayPort
DisplayPort delivers high quality digital imaging and audio, supporting bi- directional audio transmission. DisplayPort can support both DPCP and HDCP 2.3 content protection mechanisms. It provides improved visuals supporting Rec. 2020 (Wide Color Gamut) and High Dynamic Range (HDR) for Blu-ray UHD playback. You can use this port to connect your DisplayPort-supported monitor. Note: The DisplayPort Technology can support a maximum resolution of 5120×2880@60 Hz but the actual resolutions supported depend on the monitor being used.
HDMI Port
The HDMI port is HDCP 2.3 compliant and supports Dolby TrueHD and DTS
HD Master Audio formats. It also supports up to 192KHz/24bit 7.1-channel
LPCM audio output. You can use this port to connect your HDMI-supported
monitor. The maximum supported resolution is 4096×2160@60 Hz, but the actual
resolutions supported are dependent on the monitor being used.
After installing the DisplayPort/HDMI device, make sure to set the default sound playback device to DisplayPort/HDMI. (The item name may differ depending on your operating system.)
Triple-Display Configurations for the Onboard Graphics:
To set up a triple-display configuration, you must install system drivers in
the operating system first.
USB 3.2 Gen 1 Port
The USB 3.2 Gen 1 port supports the USB 3.2 Gen 1 specification and is
compatible to the USB 2.0 specification. Use this port for USB devices.
USB 3.2 Gen 1 Port (Q-Flash Plus Port)
The USB 3.2 Gen 1 port supports the USB 3.2 Gen 1 specification and is
compatible to the USB 2.0 specification. Use this port for USB devices. Before
using Q-Flash Plus (Note), make sure to insert the USB flash drive into this
port first.
Q-Flash Plus Button (Note)
This button allows you to update the BIOS when the power connector is
connected but the system is not powered on.
RJ-45 LAN Port
The Gigabit Ethernet LAN port provides Internet connection at up to 2.5 Gbps
data rate. The following describes the states of the LAN port LEDs.
- LAN Port
Connection/Speed LED:
| State | Description |
|---|---|
| Orange | 2.5 Gbps data rate |
| Green | 1 Gbps data rate |
| Off | 100/10 Mbps data rate |
Activity LED:
| State | Description |
|---|---|
| Blinking | Data transmission or receiving is occurring |
| Off | No data transmission or receiving is occurring |
USB 3.2 Gen 2 Type-A Port (Red)
The USB 3.2 Gen 2 port supports the USB 3.2 Gen 2 specification and is
compatible to the USB 3.2 Gen 1 and USB 2.0 specification. Use this port for
USB devices.
USB Type-C® Port
The reversible USB port supports the USB 3.2 Gen 2 specification and is
compatible to the USB 3.2 Gen 1 and USB 2.0 specification. Use this port for
USB devices.
SMA Antenna Connectors (2T2R)
Use this connector to connect an antenna.
Tighten the antennas to the antenna connectors and then aim the antennas correctly for better signal reception.
Line In/Rear Speaker Out
The line in jack. Use this audio jack for line in devices such as an optical
drive, walkman, etc.
Line Out/Front Speaker Out
The line out jack. This jack supports audio amplifying function. For better
sound quality, it is recommended that you connect your headphone/speaker to
this jack (actual effects may vary by the device being used).
Mic In/Center/Subwoofer Speaker Out
The Mic in jack.
Audio Jack Configurations:
Jack| Headphone/ 2-channel| 4-channel| 5.1-channel| 7.1-channel
Line In/Rear Speaker Out| |
|
|
Line Out/Front Speaker Out|
|
|
|
Mic In/Center/Subwoofer Speaker Out| | |
|
Front Panel Line Out/Side Speaker Out| | | |
To configure 7.1-channel audio, you have to use an HD front panel audio module and enable the multi-channel audio feature through the audio driver.
Caution
- When removing the cable connected to a back panel connector, first remove the cable from your device and then remove it from the motherboard.
- When removing the cable, pull it straight out from the connector. Do not rock it side to side to prevent an electrical short inside the cable connector.
Please visit GIGABYTE’s website for details on configuring the audio software.
Back View-B
DisplayPort
The connector supports DisplayPort 1.4a version.
HDMI Port
The connector supports HDMI 2.1 version.
Getting Started
This product is designed and intended to be used in vertical position only
Connecting Peripheral Devices
Connect your peripheral devices such as keyboard, mouse, monitor, and etc. to the desktop computer.
Connecting the Power Cord
Connect the included power cord to the desktop computer and a power outlet.
Turning On
Press the power button to turn on the desktop computer
It is recommended that the product be used in an open and well-ventilated area; keep a distance of at least 10 cm around the product for ventilation to ensure proper system operation.
BIOS Setup
Entering the BIOS Setup
To access the BIOS Setup program, press the key during the POST when the power is turned on.
When the power is turned off, the battery on the motherboard supplies the necessary power to the CMOS to keep the configuration values in the CMOS.
Startup Screen
The following startup Logo screen will appear when the computer boots.
Function Keys:
< DEL>: BIOS SETUPIQ-FLASH
Press the
< F12>: BOOT MENU
Boot Menu allows you to set the first boot device without entering BIOS Setup.
In Boot Menu, use the up arrow key
< END>: Q-FLASH
Press the
Caution
- Because BIOS flashing is potentially risky, if you do not encounter problems using the current version of BIOS, it is recommended that you not flash the BIOS. To flash the BIOS, do it with caution. Inadequate BIOS flashing may result in system malfunction.
- It is recommended that you not alter the default settings (unless you need to) to prevent system instability or other unexpected results. Inadequately altering the settings may result in system’s failure to boot. If this occurs, try to clear the CMOS values and reset the board to default values. (Refer to the “Load Optimized Defaults” section for how to clear the CMOS values.)
Setting the BIOS Display Language
To set the BIOS display language, go to the System Info. menu. The BIOS Language setting allows you to select the default language used by the BIOS. The System Language setting allows you to select the default language used by the BIOS.
Setting Administrator/User Password
Go to the Boot menu to set the administrator password or user password for your desktop computer.
Administrator Password
Allows you to configure an administrator password. Press on this item, type
the password, and then press . You will be requested to confirm the password.
Type the password again and press . You must enter the administrator password
(or user password) at system startup and when entering BIOS Setup. Differing
from the user password, the administrator password allows you to make changes
to all BIOS settings.
User Password
Allows you to configure a user password. Press on this item, type the
password, and then press . You will be requested to confirm the password. Type
the password again and press . You must enter the administrator password (or
user password) at system startup and when entering BIOS Setup. However, the
user password only allows you to make changes to certain BIOS settings but not
all. To cancel the password, press on the password item and when requested for
the password, enter the correct one first. When prompted for a new password,
press without entering any password. Press again when prompted to confirm.
NOTE: Before setting the User Password, be sure to set the Administrator
Password first
Loading Optimized Defaults
Go to the Save & Exit menu to load the BIOS default settings.
Load Optimized Defaults
Press on this item and select Yes to load the optimal BIOS default settings.
The BIOS defaults settings help the system to operate in optimum state. Always
load the Optimized defaults after updating the BIOS or after clearing the CMOS
values.
Saving the BIOS Settings and Exiting
-
Save & Exit Setup
Press on this item and select Yes. This saves the changes to the CMOS and exits the BIOS Setup program. Select No or press to return to the BIOS Setup Main Menu. -
Exit Without Saving
Press on this item and select Yes. This exits the BIOS Setup without saving the changes made in BIOS Setup to the CMOS. Select No or press to return to the BIOS Setup Main Menu. -
Boot Override
Allows you to select a device to boot immediately. Press on the device you select and select Yes to confirm. Your system will restart automatically and boot from that device.
Appendix
Using Q-Flash Plus
Before You Begin:
-
From GIGABYTE’s website, download the latest compressed BIOS update file that matches your product model.
-
Uncompress the downloaded BIOS file, save it to your USB flash drive, and rename it to GIGABYTE.bin.
(Note: The USB flash drive must use FAT32/16/12 file system.) -
Please turn on the power supply before connecting the USB flash drive to the Q-Flash Plus port on the back panel.
Using Q-Flash Plus
Press the Q-Flash Plus button and the system will automatically search and match the BIOS file in the USB flash drive on the Q-Flash Plus port. The QFLED and the Q-Flash Plus button on the rear panel will flash during the BIOS matching and flashing process. Wait for 6-8 minutes and the LEDs will stop flashing when the BIOS flashing is complete.
If you choose to update the BIOS manually, first make sure that your system is off (S5 shutdown state).
Regulatory Notices
United States of America, Federal Communications Commission Statement
Supplier’s Declaration of Conformity 47 CFR § 2.1077 Compliance Information
Product Name: GIGABYTE DESKTOP PC
Trade Name: GIGABYTE
Model Number: GB-AMSR9N8I-20A1
Responsible Party – U.S. Contact Information: G.B.T. Inc.
Address: 17358 Railroad street, City Of Industry, CA91748
Tel.: 1-626-854-9338
Internet contact information: https://www.gigabyte.com
FCC Compliance Statement:
This device complies with Part 15 of the FCC Rules, Subpart B, Unintentional
Radiators.
Operation is subject to the following two conditions: (1) This device may not
cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
The FCC with its action in ET Docket 96-8 has adopted a safety standard for
human exposure to radio frequency (RF) electromagnetic energy emitted by FCC
certified equipment. The Intel PRO/Wireless 5000 LAN products meet the Human
Exposure limits found in OET Bulletin 65, 2001, and ANSI/
IEEE C95.1, 1992. Proper operation of this radio according to the instructions
found in this manual will result in exposure substantially below the FCC’s
recommended limits.
The following safety precautions should be observed:
- Do not touch or move antenna while the unit is transmitting or receiving.
- Do not hold any component containing the radio such that the antenna is very close or touching any exposed parts of the body, especially the face or eyes, while transmitting.
- Do not operate the radio or attempt to transmit data unless the antenna is connected; if not, the radio may be damaged.
- Use in specific environments:
- The use of wireless devices in hazardous locations is limited by the constraints posed by the safety directors of such environments.
- The use of wireless devices on airplanes is governed by the Federal Aviation Administration (FAA).
- The use of wireless devices in hospitals is restricted to the limits set forth by each hospital.
Antenna use:
In order to comply with FCC RF exposure limits, low gain integrated antennas
should be located at a minimum distance of 7.9 inches (20 cm) or more from the
body of all persons.
Explosive Device Proximity Warning
Warning: Do not operate a portable transmitter (such as a wireless network
device) near unshielded blasting caps or in an explosive environment unless
the device has been modified to be qualified for such use.
Antenna Warning
The wireless adapter is not designed for use with high-gain antennas.
Use On Aircraft Caution
Caution: Regulations of the FCC and FAA prohibit airborne operation of
radio-frequency wireless devices because their signals could interfere with
critical aircraft instruments.
Other Wireless Devices
Safety Notices for Other Devices in the Wireless Network: Refer to the
documentation supplied with wireless Ethernet adapters or other devices in the
wireless network.
Canada, Canada-Industry Notice:
This device complies with Industry Canada license-exempt RSS standard(s).
Operation is subject to the following two conditions:
- this device may not cause interference, and
- this device must accept any interference, including interference that may cause undesired operation of the device.
Caution: When using IEEE 802.11a wireless LAN, this product is restricted to indoor use due to its operation in the 5.15-to 5.25-GHz frequency range. Industry Canada requires this product to be used indoors for the frequency range of 5.15 GHz to 5.25 GHz to reduce the potential for harmful interference to co-channel mobile satellite systems. High power radar is allocated as the primary user of the 5.25-to 5.35-GHz and 5.65 to 5.85-GHz bands. These radar stations can cause interference with and/or damage to this device. The maximum allowed antenna gain for use with this device is 6dBi in order tocomply with the E.I.R.P limit for the 5.25-to 5.35 and 5.725 to 5.85 GHz frequency range in point-to-point operation. To comply with RF exposure requirements all antennas should be located at a minimum distance of 20cm, or the minimum separation distance allowed by the module approval, from the body of all persons.
Under Industry Canada regulations, this radio transmitter may only operate using an antenna of a type and maximum (or lesser) gain approved for the transmitter by Industry Canada. To reduce potential radio interference to other users, the antenna type and its gain should be chosen so that the equivalent isotropically radiated power (e.i.r.p.) is not more than that necessary for successful communication.
European Union (EU) CE Declaration of Conformity
This device complies with the following directives: Electromagnetic
Compatibility Directive 2014/30/EU, Low-voltage Directive 2014/35/EU, Radio
Equipment Directive 2014/53/EU, ErP Directive 2009/125/EC, RoHS directive
(recast) 2011/65/EU & the 2015/863 Statement.
This product has been tested and found to comply with all essential
requirements of the Directives
European Union (EU) RoHS (recast) Directive 2011/65/EU & the
European Commission Delegated Directive (EU) 2015/863 Statement
GIGABYTE products have not intended to add and safe from hazardous substances
(Cd, Pb, Hg, Cr+6, PBDE, PBB, DEHP, BBP, DBP and DIBP).
The parts and components have been carefully selected to meet RoHS
requirement. Moreover, we at GIGABYTE are continuing our efforts to develop
products that do not use internationally banned toxic chemicals.
European Union (EU) Community Waste Electrical & Electronic Equipment
(WEEE) Directive Statement
GIGABYTE will fulfill the national laws as interpreted from the 2012/19/
EU WEEE (Waste Electrical and Electronic Equipment) (recast) directive.
The WEEE Directive specifies the treatment, collection, recycling and disposal
of electric and electronic devices and their components. Under the Directive,
used equipment must be marked, collected separately, and disposed of properly.
WEEE Symbol Statement
The symbol shown below is on the product or on its packaging, which indicates that this product must not be disposed of with other waste. Instead, the device should be taken to the waste collection centers for activation of the treatment, collection, recycling and disposal procedure.
For more information about where you can drop off your waste equipment for recycling, please contact your local government office, your household waste disposal service or where you purchased the product for details of environmentally safe recycling.
End of Life Directives-Recycling
The
symbol shown below is on the product or on its packaging, which indicates that
this product must not be disposed of with other waste. Instead, the device
should be taken to the waste collection centers for activation of the
treatment, collection, recycling and disposal procedure.
European Community Radio Equipment Directive Compliance Statement:
This equipment complies with all the requirements and other relevant
provisions of Radio Equipment Directive 2014/53/EU.
This equipment is suitable for home and office use in all the European
Community Member States and EFTA Member States.
The low band5.15 -5.35 GHz is for indoor use only.
| | AT| BE| BG| CH| CY| CZ| DE
---|---|---|---|---|---|---|---|---
DK| EE| EL| ES| FI| FR| HR
HU| IE| IS| IT| LI| LT| LU
LV| MT| NL| PL| PT| RO| SE
SI| SK| TR| UK| | |
Wireless module manufacturer: Intel® Corporation SAS
Wireless module model name: AX200NGW
Wireless module country approvals:
Wireless module manufacturer: Intel® Corporation
Wireless module model name: AX200NGW
Contact Us
GIGA-BYTE TECHNOLOGY CO., LTD.
Address: No.6, Baoqiang Rd., Xindian Dist., New Taipei City 231, Taiwan
TEL: +886-2-8912-4000,
FAX: +886-2-8912-4005
Tech. and Non-Tech. Support (Sales/Marketing) :
https://esupport.gigabyte.com
WEB address (English): https://www.gigabyte.com
WEB address (Chinese): https://www.gigabyte.com/tw
GIGABYTE eSupport
To submit a technical or non-technical (Sales/Marketing) question, please link
to:
https://esupport.gigabyte.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>