UWECAN Android Auto Wireless Dongle Converts Wired Android Auto to Wireless User Manual

UWECAN Android Auto Wireless Dongle Converts Wired Android Auto to

Wireless

Specifications:

• Type: Wired to wireless USB adapter
• Connection: Bluetooth
• Compatibility: Works with smartphones

Product Usage Instructions

1. Step 1: Initial Setup
   Turn on your phone’s WiFi and ensure Bluetooth is enabled.

2. Step 2: Connecting the Adapter Insert the wired-to-wireless USB adapter into your phone.

3. Step 3: Pairing with Phone
   On your phone, search for available Bluetooth devices and connect to “Smart- Box_

Frequently Asked Questions (FAQ)
Q: How do I know if the adapter is properly connected?
A: Check your phone’s Bluetooth settings to see if “Smart-Box_****” is listed as a connected device.

USER MANUAL
Wired to wireless USB adapter

Pay Attention
Pls turn on phone WiFi and connect the Bluetooth naming: “Smart-Box_****” first from the phone after you insert the box.

Product Introduction

Wired to wireless USB adapter, mainly used for realizing the interconnection of mobile phone and car.
The function integrates the mobile phone and the car screen, which will convert the diversified mobile phones to car entertainment, providing users with music & abundant driving pleasure, reducing the frequency of using the mobile phone, providing users with a safer driving car experience.

Compatibility Note

• Please make sure your car supports wired carp lay/ Android Auto.
• Required iPhone 6 or later iPhone models with 10S 10 or above for wireless carp lay function.
• Required an Android smartphone that sup­port latest Android Auto function and with Android 11 or h’1gher of the Android operat­ing system for wireless Android Auto func­tion.

How to confirm if your car has Apple wired CarPlay or Android Auto

function

1. Method 1:
   Connect your iPhone or Android smart­phone to your car by USB date cable and see connection interface logo on your car display.

2.  Method 2:
   Check the compatible list below or check with your car manufacturer to see if your car has this capability.
   Check out the website for supported car models.

https://www.apple.com/ios/carplay/available-models/

https://www.android.com/auto/Compatibility#Compatibility-vehicles

Products Host & Accessories

Product Instructions

1. Connect the box to the original car USB data interface;

2. Turn on the Bluetooth and wifi of the iPhone, search for the Bluetooth Device naming: “smart-BO X-****”, Pair it, and press “Use Carplay” .

3. Press the ‘Carplay’ button or enter to the CarPlay page; Read the box data and wait for a con­ section; After the connection, pis wait for a few seconds and the CarPlay interface will be shown;

Product Instructions

1. Connect the box to the original car USB data interface
2. Turn on the Bluetooth and wifi of the phone, search for the Bluetooth Device nam- ing: “smarBOX-****” Pair it and allow the Sync.
3. Press the “Andriod Auto’ button or enter to the Andriod autopage; Read box data and wait for a connection; After the connection, pls wait wait for a few seconds and Android interface will be shown;

Frequently Asked Questions

1. Does the wireless USB adapter fit my iPhone 11?
   Yes, the wireless USB adapter works every iPhone from 6 above or lOS 10 above.

2. Does the wireless USB adapter fit my Android 11?
   Support phones with 5GHZ wifi or Android 11 or above, some Samsung and Google with Android 10 and Android 9.

3. Do I have to sync the wireless USB adapter every  time when starting my car?
   Don’ t worry, After the first time adapta­tion, the wireless USB adapter will auto­matically match the Bluetooth and Wifi of your Phone every time.

FCC Statement

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1.  This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Note: The Grantee is not responsible for any changes or modifications not expressly approved by the party responsible for compliance. such modifications could void the user’s authority to operate the equipment. The device has been evaluated to meet general RF exposure requirement. To maintain compliance with FCC’s RF exposure guidelines, the distance must be at least 20 cm between the radiator and your body, and fully supported by the operatingand installation configurations of the transmitter and its antenna(s).

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>