NEX NPA-RCU2 Bluetooth Voice Remote Control User Guide
- July 6, 2024
- NEX
Table of Contents
NEX NPA-RCU2 Bluetooth Voice Remote Control
Product Information
Specifications:
- Product Name: Bluetooth Voice Remote Control
- Model: NPA-RCU2
- Size: 130mm x 28mm x 17.5mm
- Battery: AAA x 2
- Work Temperature: -10°C to 40°C
- Authentication: CE/FCC/NCC/ROHS/REACH
Product Usage Instructions
1. Navigation and Selection:
Use the UP, DOWN, LEFT, RIGHT, and OK buttons for navigation and selection.
2. Basic Functions:
The remote control features BACK and HOME buttons for basic\ functions.
3. Connecting to a Device:
Press and hold the BACK and HOME buttons simultaneously for three seconds to initiate pairing mode. The white indicator will flash. On the host device, select the device name “Playground Remote” to establish a connection. The remote’s indicator light will stay on once paired.
4. Canceling Connection:
To cancel the Bluetooth pairing information, press and hold the Select and HOME buttons together for five seconds. The indicator will flash three times, indicating the cancellation of the connection.
Frequently Asked Questions
Q: What should I do if the indicator lights do not function as described?
A: If the indicator lights do not behave as expected, try replacing the batteries with fresh AAA batteries. If the issue persists, contact customer support for further assistance.
DESCRIPTION
BASIC PARAMETERS
- Product name： Bluetooth voice remote control
- Model： NPA-RCU2
- Size： 130mm28mm17.5mm
- Battery： AAA*2
- Work Temperature：-10℃~﹢40℃
- Authentication： CE/FCC/NCC/ROHS/REACH
CONNECT
When the “BACK” and “HOME” buttons are held at the same time for three seconds, the white indicator flashes. The host clicks the device name “Playground Remote” to connect to the pairing, and the remote control indicator light is always on after pairing;
CANCEL CONNECTION
Press and hold the “Select” and “HOME” buttons at the same time for five seconds, the indicator flashes 3 times, and the Bluetooth pairing information is canceled
FCC Statement
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and\ receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure condition without restriction.
FCC ID: 2A7GQ-NPG-RCU2
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>