Mixer 5164 Bathtub Faucet System Instruction Manual
- May 15, 2024
- Mixer
Table of Contents
Instruction Manual
Bathtub faucet System
Installation Condition
- Check the Accessories List to verify that all parts are complete in this package.
- Do not disassemble the main body by yourself.
- Connect inlet pipes to supply valves.
- Make sure inlet pipes and supply valves have been installed and cleaned, with no impurities in the pipeline.
- After installation, check all joints for leakages.
- Do not leave the rain shower system exposed to a severely corrosive environment.
Model:5164 Bathtub Faucet Standard Part List
| NO | Part Name | Quantity | NO | Part Name | Quantity |
|---|---|---|---|---|---|
| 1 | Faucet Spout | 1 | 9 | Hand Pedestal Gasket | 2 |
| 2 | Brass Connector | 1 | 10 | Hand Pedestal Nut | 1 |
| 3 | Faucet Spout Gasket | 1 | 11 | Shower Hose | 1 |
| 4 | Nut | 1 | 12 | Hot and Cold Hoses | 2 |
| 5 | Faucet Body | 1 | 13 | Shower Connector Hose | 1 |
| 6 | Faucet Body Nut | 1 | 14 | Spout Connector Hose | 1 |
| 7 | Hand-shower | 1 | 15 | G9/16 change to NPT1/2 | 2 |
| 8 | Hand Pedestal | 1 | 16 | Instruction Manual | 1 |
Bathtub Faucet Installation
Step 1
-
Following the dimension or picture 1 and make holes n the edge or bathtub
Step2 -
Taking off the fixed nut or spout.the fixed nut or water diversion body and fixed nut or shower pedestal successively.Then the water diversion body should follow the picture 4 to connect the cold and hot inlet pipe
Step3 -
Following the picture 3 to fix the spout, the water diversion body and the shower pedestal in the bathtub.Then tighten mounting nut until snug
Step4 -
Connecting the cold and hot inlet pipe with angle valve
-
Turn on the water supply.check all connect points if leakage.If leaking.tighten it. Now the faucet is ready for using
Model:5162 Bathtub Faucet Standard Part List
| NO | Part Name | Quantity | NO | Part Name | Quantity |
|---|---|---|---|---|---|
| 1 | Faucet Spout | 1 | 9 | Hand Pedestal Gasket | 2 |
| 2 | Brass Connector | 1 | 10 | Hand Pedestal Nut | 1 |
| 3 | Faucet Spout Gasket | 1 | 11 | Shower Hose | 1 |
| 4 | Nut | 1 | 12 | Hot and Cold Hoses | 2 |
| 5 | Faucet Body | 1 | 13 | Shower Connector Hose | 1 |
| 6 | Faucet Body Nut | 1 | 14 | Spout Connector Hose | 1 |
| 7 | Hand-shower | 1 | 15 | G9/16 change to NPT1/2 | 2 |
| 8 | Hand Pedestal | 1 | 16 | Instruction Manual | 1 |
Step 1
-
Following the dimension or picture 1 and make holes n the edge or bathtub
Step2 -
Taking off the fixed nut or spout.the fixed nut or water diversion body and fixed nut or shower pedestal successively.Then the water diversion body should follow the picture 4 to connect the cold and hot inlet pipe
Step3 -
Following the picture 3 to fix the spout, the water diversion body and the shower pedestal in the bathtub.Then tighten mounting nut until snug
Step4 -
Connecting the cold and hot inlet pipe with angle valve
-
Turn on the water supply.check all connect points if leakage.If leaking.tighten it.
Now the faucet is ready for using
Care and Maintenance
Do’s
- In order to keep the mixer surface bright, please clean the mixer regularly.
- Rinse faucet with clean water and wipe it with soft cotton cloth.
- Use one of the following cleaners to remove dirt on the surface:
a. Mild liquid cleaner.
b. Colorless glass cleaner and powder cleaner which does not cause abrasion and can be dissolved completely.
c. Polish liquid which does not cause abrasion.=
Don’ts
a. Avoid using cleaning powder, harsh cleaning chemicals, brushes and coarse
cloth to prevent scratching and friction.
b. Do not use acid cleaner to clean the faucet as it may cause surface
corrosion of the faucet.If the faucet should be exposed to harmful acid
substances, please rinse it with water immediately.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>