AKAI S950RE RAM Expansion Module Installation Guide
- July 4, 2024
- AKAI
Table of Contents
AKAI S950RE RAM Expansion Module
INSTALLATION GUIDE
STEP 1 – FLIP IT OVER
Flip your sampler and remove the bottom RAM cover lid
STEP 2 – INSERT THE PLASTIC THING
If your sampler’s board does not have the small plastic PCB holder, one is
included with your RAM module; insert it to the board – just push it softly
into the hole
STEP 3 – INSERT THE RAM MODULE
The RAM modules are keyed, they can’t be inserted backwards – just push them
into the socket
STEP 4 – FIX IT WITH THE PLASTIC WASHER AND M2.5 NUT
A plastic washer and M2.5 nut is also included with each RAM module; just
tighten it with hand, that should be enough
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>