EIGHTREE ET10 Smart Plug User Manual

EIGHTREE ET10 Smart Plug

Product Information

Specifications

• Model: XYZ-2000
• Dimensions: 10 x 5 x 3 inches
• Weight: 2.5 lbs
• Power Source: AC adapter (included)
• Material: Plastic
• Color: Black

Product Usage Instructions

Unboxing and Setup

Upon unboxing, carefully remove all packaging materials. Connect the AC adapter to the power port on the device. Plug the adapter into a power outlet.

Powering On

Press the power button located on the front panel of the device. The LED indicator will light up to show that the device is powered on.

Mode Selection

Use the mode selection buttons to choose between different operating modes. The selected mode will be displayed on the screen.

Adjusting Settings

Depending on the mode selected, use the corresponding buttons to adjust settings such as volume, speed, or intensity.

Maintenance

Regularly clean the device with a soft, damp cloth. Avoid using harsh chemicals or abrasive materials that may damage the plastic exterior.

Dear Valued Customers,
We would like to express our appreciation for choosing Eightree and being a part of our community. As an up-and-coming brand established in 2021, we are dedicated to developing and manufacturing high-quality smart home products.
Our mission is to make smart home technology accessible to everyone, regardless of budget or experience. We are committed to providing you with convenient and reliable smart home solutions that make your life easier.
Thank you for being a part of Eightree, and we look forward to continuing to serve you. We are always happy to help and provide you with prompt support. If you ever need assistance, please feel free to contact us:
support.us@eightree.club

Before Using

Thank you for choosing our smart plug ET10.
Before you begin using it, please take a moment to read the following warm tips.

1. If reading this manual is difficult for you, please download the user manual from the Amazon listing for enlarged viewing.
2. This smart plug is only perfectly suitable for traditional electrical equipment, such as buttons, knobs, and other control appliances, and is not suitable for remote control or touch screen equipment. This plug allows you to remotely control and automate your appliances from your cell phone or smart speaker.
3. If you want to use a smart plug in a remote control or touch screen device, it is only applicable to turn off the device.
4. This smart plug only supports the 2.4GHz network environment. If your home has a dual-band router, it needs to be split into two frequency bands: 2.4GHz and 5GHz; when connecting, please ensure that your mobile phone is only connected to the 2.4GHz network.
5. If you encounter any problems when using the smart plug, you can contact our support team at: support.us@eightree.club.

At a Glance

• Press to turn ON or OFF the smart plug.
• Press and hold (for 5 seconds) until the LED flashes to initiate the app onboarding process or factor reset the smart plus.

LED Indicator Status

• No light: Power off
• Light flashing: Pairing mode
• Solid blue light: Power on

Specifications

Installation

1. Search and download Smart Life APP in Google Play Store or APP Store. If you can not find Smart Life APP, please scan the following QR code (It is recommended to use the original camera of your mobile phone to scan);
2. Open the Smart Life APP, create a Smart Life account and log in. If you already have one, please log in directly;
3. Plug the smart plug into the socket;
4. Choose one of the following three connection methods to connect. It is recommended to follow the first one (BLE Mode).

Notice

• a. Please make sure the distance between the smart plug and the router is within 100ft;
• b. Before starting the connection, make sure your mobile phone has its Bluetooth turned on and is connected to the 2.4GHz network only.

BLE Mode (Recommended)

1. Step 1. Turn on the Bluetooth of your mobile phone and connect your phone to the 2.4GHz Wi-Fi network.
2. Step 2. Connect the plug to the power source and long press the power button for more than 5s till the indicator flashes.
3. Step 3. Launch the Smart Life app, the device will be found automatically.
4. Step 4. Tap Add and enter the name and password of the 2.4GHz Wi-Fi network.
5. Step 5. Wait for connection (may take up to 2 minutes).

AP Mode

1. Step 1. Connect your phone to the 2.4GHz Wi-Fi network.
2. Step 2. Long press the power button for 5 till the indicator flashes slowly (1 time every 2 seconds); If it’s flashing quickly, press and hold for 5s to switch to slow flashing mode.
3. Step3. Launch Smart Life APP> Tap Add device>Choose “Socket (Wi-Fi)”>Enter the name & password of the 2.4GHz Wi-Fi network>Tap “Blink Slowly”.
4. Step. Connect your plug to the hotspot named SmartLife-XXXX or SL-XXXX, and back to the Smart Life APP.
5. Step5. Wait for connection (may take up to 2 minutes)

EZ Mode

1. Step 1. Connect your phone to the 2.4GHz Wi-Fi Network.
2. Step 2. Long press the power button till the indicator flashes quickly (Flashes twice per second).
3. Step 3. Launch the Smart Life app and tap “Add device”
4. Step 4. Choose “Socket (Wi-Fi)” and enter the name and password of the 2.4GHz Wi-Fi network.
5. Step 5. Tap “Blink Quickly”.
6. Step 6. Wait for connection (may take up to 2 minutes).

How to Use

Remote control: Turn or emotely through the mob anywhere.

Timer

• a. Schedule: Schedule your smart plug to turn on/off automatically to simplify your daily routine;
• b. Countdown: Set the countdown timer and your smart plug will automatically be toggled after the time ends (e.g., 1: turn on/off the plug after 10 mins);

Scene: Turn the plug on/off based on changes in weather, location, or device status, etc.

Third-Party Control (Alexa, SmartThings, and Google Assistant)

1. Step 1. Make sure you have connected the plug to the “Smart Life” App first.
2. Step 2. Launch the Smart Life app > Tap “Me” > Third-party service › Follow the and promote.
3. Step 3. You can also scan the QR code below to watch detailed video tutorials.

Troubleshooting

Fail to connect to Wi-Fi

• Make sure the distance between the smart plug and the router is within 100 feet;
• Check the Wi-Fi connection of the smart  plug (Only supports 2.4GHz Wi-Fi);
• Make Sure the Wi-Fi name and password you entered are correct.

Device Offline

• Make Sure your Wi-Fi signal is good and stable;
• Check if the Wi-Fi name or password has been changed.
• Try to reset the smart plug.

The smart plug can be turned on/off via APP, but the connected device does not work

• Manually turn the plug on/off to see if the LED lights up/off normally to eliminate the socket faults;
• Ensure the connected device is compatible and functioning properly.
• If the plug is defective, please contact our support team for a new replacement or refund.
  If the above tips can’t help you, please contact our support team at: Support.us@eightree.club

Safety Information

• This device is for indoor use only.
• Do not use this device in wet or damp locations.
• Do not use this device with appliances or devices that exceed the rated voltage or current.
• Unplug the device during thunderstorms or if not in use for extended periods.
• Do not disassemble or attempt to repair the device on your own.

FCC Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

To assure continued compliance, any changes or modifications not expressly approved by the party. Responsible for compliance could void the user’s authority to operate this equipment. [Example use only shielded interface cables when connecting to computer or peripheral devices]. This equipment complies with Part 15 of the FCC Rules.

Operation is subject to the following two conditions:

1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that may cause undesired operation.

FCC Radiation Exposure Statement
The equipment complies with FCC Radiation exposure limits set forth for uncontrolled environment. This  equipment should be installed and operated with minimum distance 20cm between the radiator and your body.

IC Warning

This device complies with Industry Canada licence -exempt RSS standard. Operation is subject to the following two conditions: [1] this device may not cause interference. and [2] this device must accept any interference, including interference that may cause undesired operation of the device.
Under Industry Canada regulations, this radio transmitter may only operate using an antenna of a type and maximum Lor lesser gain approved for the transmitter by Industry Canada. To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the equivalent isotopically radiated power [e.ir.p.] is not more than that necessary for successful communication.

Manufacturer Information

Shenzhen Realwe Innovation Technology Co., Ltd
Room 402, Building 6, No. 8 Huamei Road,
Tantou Community, Songgang Street,
Bad’an District, Shenzhen, China, 518105
Email: Manufacturer@eightree.club

FAQ

Q: How do I reset the device?

A: To reset the device, locate the reset button on the back panel and press it using a small pin or paper clip.

Q: Can I use the device with batteries?

A: No, this device is designed to be used with the included AC adapter only.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>