eufy S330 4G LTE Camera User Guide

eufy S330 4G LTE Camera

Specifications:

• LED Indicator
• Speaker
• microSD Card Slot
• Light
• Lens
• Microphone
• Light Sensor
• SIM Card Slot
• SYNC Button
• USB-C Charging Port

Product Usage Instructions

Inserting SIM Card and microSD Card:

1. Open the waterproof cover of the nano SIM slot on the back of the camera, then insert the provided nano SIM card. Make sure the gold contacts side of the nano SIM card is facing up.
2. Rotate the camera and open the waterproof cover of the SD card slot, then insert a microSD card. Make sure the chip side of the microSD card is facing up. Close tightly the waterproof cover after inserting the card.

Charging the Camera:
Fully charge the camera prior to its initial use. Charging takes 3 to 5 hours to complete.

LED Indicator Status:

Setting up the Camera:

1. Download and install the eufy Security app, then sign in or create an account.
2. Follow the in-app instructions to add the camera to the device list.

Mounting your Camera:
Select a location where you can get the desired view. Hang the camera 8-10 ft (2.5-3 m) above the ground. Avoid installing the camera directly facing the monitoring area to prevent blind spots.

Select a Location for the Solar Panel:
Select an optimal location for the solar panel within a 10 ft (3 m) radius of the camera. Choose orientation based on your location for maximum solar energy absorption.

Mount the Camera:

1. Drill holes with a 15/64 inch (5.95 mm) drill bit with the provided positioning card, then insert the anchors into the holes.
2. Firmly secure the camera onto the mounting bracket.
3. Connect the solar panel to the camera using the USB-C cable.

Bundling the Camera on a Post:
You can also bundle the camera on a post using the pole mounting strap.

Install the Solar Panel:

1. Secure the mounting bracket in the selected optimal location, then install the solar panel onto the mounting bracket by turning it.
2. Remove the film before use.

What’s in the Box

At a Glance

1. LED Indicator
2. Speaker
3. microSD Card Slot
4. Light
5. Lens
6. Microphone
7. Light Sensor
8. SIM Card Slot
9. SYNC Button
10. USB-C Charging Port

Inserting SIM Card and microSD Card

1.  Open the waterproof cover of the nano SIM slot on the back of the camera, then insert the provided nano SIM card.
   Make sure the gold contacts side of the nano SIM card is facing up.

2. Rotate the camera and open the waterproof cover of the SD card slot, then insert a microSD card.
   Make sure the chip side of the microSD card is facing up.

Close tightly the waterproof cover after inserting the card.

Charging the Camera

Fully charge the camera prior to its initial use. Charging takes 3 to 5 hours to complete.

LED Indicator Status Charging Status

Setting up the Camera

1. Download and install the eufy Security app, then sign in or create an account.
2. Follow the in-app instructions to add the camera to the device list.

Mounting your Camera

Select a Location and a Height
Select a location where you can get the desired view. We recommend hanging the camera 8-10 ft (2.5-3 m) above the ground.

To ensure that no detection is missed, do not install the camera directly facing the monitoring area. Instead, maintain an angle to avoid any potential blindspots.

Select a Location for the Solar Panel
Select an optimal location for the solar panel that receives sufficient sunlight and is within a 10 ft (3 m) radius of the camera. Make sure the location hasfacilities or structures suitable for mounting the solar panel.

To absorb the most solar energy, choose the highly recommended orientation for installation based on your location.

Mount the Camera

1. Drill holes with a 15/64 inch (5.95 mm) drill bit with the provided positioning card, then insert the anchors into the holes.
2. Firmly secure the camera onto the mounting bracket.
3. Connect the solar panel to the camera using the USB-C cable.

Bundling the Camera on a Post
You can also bundle the camera on a post using the pole mounting strap.

Install the Solar Panel

1. Secure the mounting bracket in the selected optimal location, then install the solar panel onto the mounting bracket by turning it.
2. Remove the film before use.

FAQ

Q: How long does it take to charge the camera?
A: Charging takes 3 to 5 hours to complete for a full charge.

Q: How should I position the camera for optimal performance?
A: Hang the camera 8-10 ft above the ground, avoiding direct facing of monitoring areas to prevent blind spots.

Q: What orientation is recommended for installing the solar panel?
A: Orientation recommendations vary based on location. For Northern Hemisphere locations, True South is highly recommended, while for Southern Hemisphere locations, True North is recommended.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>