BOSCH Video Management System User Guide
- July 3, 2024
- Bosch
Table of Contents
Invented for life
BVMS 12.1 patches – Release Notes
User Guide
Video Management System
Author:
Wrobel Maciej (BT-VS/XSW-SEC)
Date:
26 March 2024
BVMS Version 12.1 patches
This document is distributed online and updated on regular basis, whenever new
patch is released.
The latest version of this document is always available on the Bosch Security
and Safety Systems Download
Store.
Please always refer to general BVMS Release Notes, also available on the
Bosch Security and Safety Systems Download
Store.
Patches included in the Cumulative Patch 3 for BVMS
12.1
Overview
| No. | Name of the fix | Included in |
|---|---|---|
| 1 | 440029 – Filtering PTZ commands | Cumulative Patch 3, Cumulative Patch 1 |
| 2 | 441937 – Slowing down MP4 exported video | Cumulative Patch 3 |
| 3 | 445686 – Delay in the first PTZ movement | Cumulative Patch 3 |
| 4 | 448513 – Operator Client login issue and server stability after the restart | |
| or activation of configuration | Cumulative Patch 3 |
Detailed Release Notes for the patch
| Patch ID: | 448513, 445686, 441937, 440029 |
|---|---|
| Patch Title: | BVMS 12.1 – Cumulative Patch 3 |
| Patch Target Version: | BVMS-12.1.0.414 |
Patch Details:
This patch fixes issue 448513 by improving the login of Operator Client.
Important hints:
The Patch for issue 448513 needs to be installed on the Management Server.
It is optional for the Operator Client machines only if further problems
occur.
NOTE – Manual action required:
After installing the patch, it is necessary to initiate a configuration change
on the server side, activate the new configuration, and then log in again with
your user account.
Additionally, make sure to restart all running Operator Client instances to
apply the newly activated configuration.
—————————–
This patch fixes issue 445686 by improving the session handling for the PTZ
connection.
This patch fixes issue 441937 by improvements in the area of mov-/mp4-exports.
This patch fixes issue 440029 by filtering out same zoom commands and
optimizes PTZ command frequency with granularity adjustment.
The granularity for pan and tilt movements can be set in the
OperatorClient.exe.config file. The key is “PtzGranularity” and its default
value is “10”.
It specifies the smallest step size for the pan and tilt speed adjustments.
Lower values allow for finer control, while higher values result in coarser
adjustments.
Important hint:
Please use only allowed values for the “PtzGranularity”, which are: 1, 2, 4,
5, 10, 20, 25, 50, 100
Problem Details:
Issue 448513 caused the problem that the login of the Operator Client has a
very high delay.
Issue 445686 caused the problem of a delay in starting the first PTZ movement.
Issue 441937 caused the problem that in mov- or mp4-exports the video is shown
with low frame frate and either delayed or no audio.
Issue 440029 caused the problem that the Video Stream stops while giving PTZ
commands.
Affected Bosch VMS Components / Machines:
– Bosch VMS Management Server
– Bosch VMS Operator Client
– Bosch VMS Configuration Client
– Bosch VMS Cameo SDK
List of Replaced Files:
– AppData\Client\OpClient\Components\Spring.Bootstrap.xml
– AppData\Shared\Spring.HashEngine.xml
– Bosch.Vms.CameoSdk.Core.dll [Version 12.1.0.422] –
Bosch.Vms.Client.OpClient.Ptz.PtzController.dll [Version 12.1.0.422] –
Bosch.Vms.Client.Shared.PtzController.dll [Version 12.1.0.415] –
Bosch.Vms.Frontend.OpClient.Communication.dll [Version 12.1.0.422] –
Bosch.Vms.Frontend.OpClient.ServerManagement.dll [Version 12.1.0.426] –
Bosch.Vms.Frontend.OpClient.Wcf.dll [Version 12.1.0.426] –
Bosch.Vms.Server.UserAuthenticationService.dll [Version 12.1.0.426] –
Bosch.Vms.Shared.Dome.Services.dll [Version 12.1.0.422] –
Bosch.Vms.Shared.Export.Mpeg.ArchiveStreamProvider.dll [Version 12.1.0.416] –
Bosch.Vms.Shared.Export.Mpeg.FfMpegFacade.dll [Version 12.1.0.416] –
OperatorClient.exe.config
Copyright Robert Bosch GmbH. All rights reserved, also regarding any disposal, exploration, reproduction, editing, distribution, as well as in the event of applications for industrial property rights.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>